Laboratory Flotation Cell
Flotation deinking method is based on the principle of mine ore, according to the fiber, filler and ink composition of wettable, flotation cell in the 10 to 150 micron ink particles adsorbed on the air bubbles, floating to the surface to remove the pulp, fiber and filler remained in the pulp.
It is mainly composed of a flotation tank, the circulation line, paper pulp pump, air bubble generating device, liquid discharging pipe.
more pulp tester video, click here
follow us on youtube and face book
SKZ1030 Laboratory Flotation Cell
Flotation deinking method is based on the principle of mine ore, according to the fiber, filler and ink composition of wettable, flotation cell in the 10 to 150 micron ink particles adsorbed on the air bubbles, floating to the surface to remove the pulp, fiber and filler remained in the pulp.
It is mainly composed of a flotation tank, the circulation line, paper pulp pump, air bubble generating device, liquid discharging pipe.
Parameters:
Outfall up and down range of activities | 0 --100 |
Flow calculation control | Yes |
Tank capacity | 28 liters |
Tank size | Φ380 × 380mm |
Tank material | stainless steel (1Cr18Ni9Ti) |
Treated pulp capacity | 280g dry pulp |
Pulp concentration | 0.8% ~ 1.2% |
Air requirement | maximum amount 95psi |
Gas meter | 0.25 ~ 2.5 m3 / h adjustable |
Flotation deinking Temperature range | 50 ~ 70 ℃ controlled adjustable |
Heating power | 2.2KW Voltage 220V |
Pulp material circulation | Stainless steel pump |
Pump motor power | 750W Voltage 380V |
Pump motor speed | 1400 r / min |
Heat pump temperature | 0 ~ 100 ℃ |
Pump rated flow rate | 3.6 cubic meters / hour |
Pump suction and discharge kinematic viscosity | 3000 centipoise (cp) |
Size (cm) | 1300 (Length)X60(width)X90(height) |
Weight | 70kg |
Related News
Submitted successfully
We will contact you as soon as possible