Laboratory Paper GSM Tester
base, rack, gear, rack, upper edge and lower edge, specimen baffles
place noto a solid flat worktable, can be work.
After use should be thoroughly wiped clean and clear.
If long period not use, should be to wipe the blade up and down with oil.
Laboratory Paper GSM Tester SKZ114C real model video, click here and more
follow us on youtube and face book
Laboratory Paper GSM Tester SKZ114C
It is the sample cutter for the test of all kinds of paper grammage and slice .The cutter conforms to the standard of QB/T1671—98.
Technical parameters:
Area | 100Cm2 |
Specimen diameter | Φ112.8±0.05mm |
Specimen thickness | paper: 0.1-1.0 (mm), cardboard: single wall <0.6mm |
Dimension | 270×260×405 (mm) |
Weight | 15kg |
Structure and operation
Structure: base, rack, gear, rack, upper edge and lower edge, specimen baffles, received board and operating handle.
Put the material into the blade between the upper edge and lower edge, press the handle, the blade on the upper edge pressed down and cut the sample. Then falls on the received board, and automatically slide out from the side. After cutting, release the handle, the upper edge blade reset automatically by spring effect.
Installation and Maintenance
place noto a solid flat worktable, can be work. After use should be thoroughly wiped clean and clear. If long period not use, should be to wipe the blade up and down with oil.
Related News
Submitted successfully
We will contact you as soon as possible