Products DescriptionHot Selling Yarn Length Tester SKZ193BApplications:By the winder, the sample yarn on the through tube can be winded into skein
yarns with a reel and the reeling tension be measured. It is used to measure a yarn
length, designed for yarn linear density (or count) measurement and skein yarn
strength test. Standard:ISO 2060.2, ISO2060, ASTM D1907, GB4743- 95Features: 1.Timing cog belt of direct transmission, no-lap skid. 2.Countint by optocoupler.
Contact Now
Product DescriptionLab Manual Yarn Twist Tester SKZ192C Used for testing the twist nonhmogeneitiy, the twist unevenness, and the twist shrinkage of various yarns and for product quality inspection to eliminate problems in the process.Standards: GB/T2543.1/2 FZ/T10001 ISO2061 ASTM D1422 JIS L1095Features:1. Driving form: By hand operating.2.
Contact Now
SKZ101-16C Single Yarn Strength TesterFor a variety of fiber and metal filaments dry (wet) tensile test.Standards:ISO5079 , ISO11566Maximum load test200cN, test error: 0.2% (F.S), sensitivity: 0.01cNElongation range≤100mm, Resolution: 0.01mmTest speed1 ~ 200mm / minTest MethodBuilt-in 3 kindsClamping distance10 mm, 20 mmOutputliquid crystal display, print outputPowerAC220V ± 10% 50Hz 100WDimensions1000 × 420 × 460mmWeight30Kg
Contact Now
Digital Density Balance for Emulsions Chemical Solution SKZ300EApplicationsDirect readings, with temperature compensation, and Solution compensation, more humanized operation, suitable for onsite operations.For density determination of Chemical solution, additives, suspensions, emulsions, dispersions, homogeneous type solution, mouthwash, pharmaceutical, and other high viscosity, suspensions, emulsions, colloidal liquid Features1.Direct reading density of liquid, which density> 1 or <12.
Contact Now
Digital Density Balance For Gold K Value SKZ400To test density of solid, liquid, powder, water-absorbent sample and Gold K value (A) Feature: 1. High-precision sensor, impact resistance, anti-overload, to ensure weighing accuracy and stability.2. Built-in rigorous test and calculation procedures, direct display density, without manual conversion.3. Aluminum shell, to enhance the anti-static balance anti-interference ability.4. High contrast LCD liquid crystal display, clear and intuitive readings.5.
Contact Now
Digital Density Balance For Solid Rubber Grain SKZ300A Direct readings, with temperature compensation, and Solution compensation, more humanized operation, suitable for onsite operations.For density determination of rubber, plastic, wire and cable, electrical appliances, sports equipment, tires, glass products, hard alloy, powder metallurgy, magnetic materials, seals, ceramics, sponge, EVA materials, foam materials, alloys, friction materials, New materials, battery materials.Features1. Direct reading density and volume of solid, particles
Contact Now
SKZ111A-1 Yarn cotton Moisture MeterSuitable for measuring cotton yarn and wool yarnMEASURE RANGE: 0-90%RESOLUTION: 0.1%PINS LENGTH: 600MMLCD DIGITAL DISPLAYPACKING AND TRANSPORTATIONevery details will be checked to assure the productUPS,FedEx Express,TNT,EMS,aramex,DHL WORLDWIDE EXPRESSCompany ProfileSKZ Moisture meter is a high precision moisture measuring instrument based on advanced technology, which is widely used in various industries. The moisture meter has the following features:1.
Contact Now
SKZ106A Paper Thickness Gauge Meter Tester DeviceThe tester is applying to test the thickness of paper and cardboard. Standard:ISO534: Paper and board -Determination of thickness, density and specific volumeISO 438:1980.
Contact Now
SKZ145 Melt Index Tester Mfi TesterFor engineering plastics such as polycarbonate, nylon, and fluorine plastics, whose melt temperatures are higher, as well as fit for plastics tests of polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc., whose melt temperatures are lower, the following parameters must be determined: melt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Char
Contact Now
Digital Paper Thickness Tester SKZ106AThe tester is applying to test the thickness of paper and cardboard. Standard:ISO534: Paper and board -Determination of thickness, density and specific volumeISO 438:1980. Paper -- Determination of bulking thickness and apparent densityGB/T451.3: paper and board-Determination of thicknessTechnical Parameters:Measure range0-6mmIndicator display range0-12.7mmAccuracy0.001mm or 0.01mm (paper board)Measuring area200mm²Pressure100 KpaValue error±2.5um or ±0.5%Dimension80×120×120 (mm)Weight5kg
Contact Now
SKZ145 Melt Flow Rate TesterMelt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin must be determined for engineering plastics, which have higher melt temperatures, such as polycarbonate, nylon, and fluorine plastics; and for fit for plastics tests, which have lower melt temperatures, such as polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Product features:1.The control sy
Contact Now
Cotton Yarn Wool Yarn Textile Moisture AnalyzerIdeal for measuring wool and cotton yarnRANGE OF MEASUREMENT: 0-90%RESULTS: 0.1%LENGTH OF PINS: 600 mmDIGITAL DISPLAY, or LCD PACKING AND TRANSPORTATIONevery details will be checked to assure the productUPS,FedEx Express,TNT,EMS,aramex,DHL WORLDWIDE EXPRESSProfile of the CompanyBased on cutting-edge technology, the SKZ moisture meter is a highly accurate moisture measuring device that finds extensive application across multiple sectors. The features of the moisture meter are as follows:1.
Contact Now
To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(cm3/10min) and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, polypropylene, ABS resin and poly-formaldehyde resin, etc, whose melt temperature are lower, widely applied to the fields of plastics materials, product, petrochemical.Standards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplas
Contact Now
SKZ108C Bursting Strength Of PaperApplicationUsed to detect a range of paper products and thin cardboard layers with a maximum density of 2000 kpa. It may also be used to detect different types of single and multi-layer cardboard, corrugated cardboard, silk cotton, and other non-paper items.StandardsISO2759, ISO 2758. PrincipleIt uses a button for signal transmission.
Contact Now
SKZ-SY3020/3060 Handheld SpectrophotometerSpecificationModelSKZ3020-Basic versionSKZ3060-Professional versionCaliberSingle Caliber 4mm or 8mmSwitchable caliber 4mm and 8mmSCI SCESCISCI and SCELight typeHigh accuracy full spectrum LEDHigh accuracy full spectrum LED+Dual UVFix positionVisualCamera locationRepeated Accuracy△E≤0.07△E≤0.03Color spaceCIE-Lab, CIE-LCh, Luv, Hunter-Lab, XYZ, Yxy, sRGB, DIN LAB99, CMYK (A/T/E/M/I) Field density, Munsell, Reflectance (bright vision), Blackness, YI yellow, Isochromatic spectrum (light jumping), hiding power, tint/strength/dye
Contact Now
Introduction to Hydrogen AnalyzerHydrogen is a colorless and odorless gas with a very low density. Its applications are very wide, and it can be used in the petrochemical industry to produce ammonia, as well as as as as a reducing agent for refining precious metals. In terms of energy, hydrogen can be used in fuel cells, and hydrogen also has the function of embrittling cream in the food industry. Choosing a good gas detector is very important for gas detection.
Contact Now
SKZ182A Crease Recovery Tester Used for testing fabric recoverability after being creased.Standard: ISO2313, AATCC66 M&S.Feature:
1.Shade-black-box design, rotary-Position
2.Pressure increasing and relief manually controlled , stepper motor flap
3.CCD imaging, dynamic and static images processing
4.A variety of charts and data statistic, analysis, storage and output
5.Built-in electrical angle measuring device by computer software, the results can be amended in accordance with imaging data to process the complex situation of testingWarranty1 yearCustomized supportOEMBrand NameSK
Contact Now
SKZ128 Digital Shore Hardness Tester Plastic and rubber that have been vulcanized are tested for hardness using a shore hardness tester. The stand holds the hardness head in place. To perform spot testing, you can also remove the head from the stand.
Contact Now
Hydrostatic/Burst Tester is used to determine the long-term hydrostatic strength and instant blasting of PVC,PE,PPR,ABS and other plastic pipes. Standards: ISO1167-2006, ASTMD1598-2004, ASTMD1599, ISO9080, CJ/T108, ASTMF1335. Mainframe1.It is controlled both by PC and “Precision Pressure Controlling Unit”.2.It has LCD screen3.Every station controls separately.
Contact Now
Schopper-Riegler Beating Freeness Tester MachineStandards:QB/T1054-98, GB/T3332-1982 and ISO5267/1.Feature:1. hydraulic pressure structure with stainless steel2. confirms to Standard ISO 3332-1982 and ISO5267/13.
Contact Now
SKZ128A Shore A Hardness TesterThe shore hardness tester is used to measure the hardness of vulcanized rubber and plastic. The hardness head is mounted on a stand, but it can also be removed for spot testing.
Contact Now
SKZ1017B Five point heat sealing apparatusThe Five-point heat-seal Tester, also known as the gradient heat seal tester, is a versatile tool used to determine various parameters related to heat sealing. It can be used to determine the heat sealing temperature range, suitable packaging speed, and heat sealing pressure of different materials such as plastic film substrates, flexible packaging composite films, coated paper, and other heat sealing composite membranes.
Contact Now
SKZ128A Durometer Hardness Tester For RubberA shore hardness tester is used to determine the hardness of vulcanized rubber and plastic.The hardness head has been mounted on the stand.
Contact Now
Falling Hammer Impact Tester SKZ148BUsing Double tube structure, Mainly consists: workbench, Prevent secondary impact mechanism, Hammer, Lifting mechanism, Automatic drop hammer mechanism, Motor, reducer, Electric control box and StandWidely used in a variety of plastic pipe impact resistance of measurement, and also for plates, profiles measured impact. StandardISO 3127, MT-558, ISO 4422 Technical parametersMaximum impact height2000mmHeight positioning error≤ ± 2mmHammer weight0.25 ~ 10.00Kg (0.125Kg / per increment)Optional 15.00KgHammerD25, D90Lift hammer modeAuto (also can hand t
Contact Now
