Water Vapor Transmission Rate Testing-manufacture,factory,supplier from China

SKZ172B Water Vapor Transmission Rate TestingTo determine Water-Vapour Permeability of fabric. Used for testing the moisture permeability of all kinds of fabrics, including moisture-permeable coated fabrics and nonwoven fabrics.Standards:ASTM E90-00 ASTM E96  JIS L1099A  BS 7209  JIS L1099BFeature 1. Rotary cup holder 2. Three layers test cup holder, suitable for high-volume testing 3. Three test areas, seperate air duct, temperature and humidity constant and uniform 4. Three test areas wind speed calibrated independently 5.

SKZ145 Melt Flow Rate TesterMelt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin must be determined for engineering plastics, which have higher melt temperatures, such as polycarbonate, nylon, and fluorine plastics; and for fit for plastics tests, which have lower melt temperatures, such as polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Product features:1.The control sy

LCD Melt Flow Indexer MRF MVR Meter ISO1133 400degree MFI EquipmentStandards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics —Part 1:Standard methodISO 1133-2:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics —Part 2: Method for materials sensitive to time temperature history and/or moistureGBT 3682.1-2018 "Plastic Thermoplastic Melt Mass Flow Rate (MFR) and Melt Volume Flow Rate (MVR) Determination"ASTM D1238-2013 "Standard Test Method

M310T Water Quality AnalyzerGENERAL FEATURES4.3-inch color LCD touchscreen with high contrast.Auto, timed, and continuous reading are all possible with the multi-reading feature.Accurate findings are ensured by automatic or manual temperature correction.The measurement endpoint is sensed and locked by the auto-hold feature.Up to 500 sets of data can be stored for any parameter (GLP-compliant).USB communication support is provided.The battery service life is significantly increased by the auto-power-off feature.The "Reset" feature automatically returns all settings to their origi

SKZ1018C Fully Automatic Volumetric Karl Fischer TitrationAdopted Karl Fischer volumetric moisture can be measured liquids, solids and gases in the sample crystal water, adsorbed water, free water. StandardsISO 10337,ASTM D 1744, ISO 760 , ASTM E203Feature1. Huge variety LCD show, English menu activity.2. Full powerful showcase, WINDOWS working style simple to utilize.3. Shown at the same time (dampness content, rate, PPM content, reagent utilization), variety titration bend dynamic showcase4.

Product Introduction★ Flexible and flexible pumping system.The gas sampling pump's flow rate can be adjusted in ten increments to personalize the detection flow for varied settings.★ Multi-layered filter.The three-layer filter unit efficiently filters oil, water, dust, and other pollutants.

SKZ126A Vibration Testing MachineThis tester can be used to mimic transport testing for a variety of products, including toys, electronics, furniture, presents, ceramics, packaging, and other items.

Feature: 1.Mainly composed by dryers, vacuum pumps, and sheet former (press)2.Sheet former parts: power-driven drain off water, white water cycle use, power-driven feed water, aerodynamic homogenate ( also can manual homogenate), Water molding or vacuum pump suction molding3.Dry parts adopt vacuum heating and drying, vacuum pump adopts water cycle, heating element use heating plate, temperature control system, and has a short circuit, disconnection, and automatic over-temperature alarm function, with a stop anti-oil return.4.Countertops and water tanks are made of stainless steelTech

To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(cm3/10min) and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, polypropylene, ABS resin and poly-formaldehyde resin, etc, whose melt temperature are lower, widely applied to the fields of plastics materials, product, petrochemical.Standards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplas

KFT-40VC Karl Fischer TitratorFeatureVolumetric Karl Fischer Titration  ● Support KF Titration Mode and Titer Detection Mode. ● Features of auto-filling, auto-purging and auto-mixing of the reagents ensure safe handling of Karl Fischer chemicals. ● Automatic/manual background drift correction ensures accurate results.  ● Selectable units including mg, mg/L,% , ppm, etc. ● Settable parameters, including measurement unit, polarization current,   stirring rate, titration rate, stop volume, endpoint potential, stop criterion and etc. ● Store up to 20

Laboratory Desktop Water Conductivity Meter1. High resolution LCD display, 5.7 inches.2. Multi-reading feature allows auto-read, timed-read and continuous-read.3. Automatic/Manual temperature compensation ensures accurate results.4. Auto-hold feature senses and locks the measurement endpoint.5. Data Storage 500 sets (GLP-compliant).6. Support for USB or RS-232 communication.7. Reset feature automatically resumes all settings back to factory default options.8. Waterproof: IP54.9. 1-3 points calibration with Standard Recognition.10.

SKZ120B/C Film Economic Transmittance Haze MeterHaze meter is relevant in all obvious and semitransparent parallel degree cloth for trying out transmittance and haze degree.Application:Applied to decide the transmittance, haze, reflectivity of transparent, translucent parallel flat objects ( Plastic plates, sheets, plastic film, glass), and additionally can decide the turbidity of some liquid (Water, beverage, pharmaceutical, coloring liquid, grease)Standards:ASTM D1003-61 and JIS K7136-2000Technical parameters:Transmittance accuracy≤ 1%Haze AccuracyHaze ≤ 0.5%, ≤ ± 0.1%Haze> 0.5%, ≤ ±

Introduction to Portable Gas DetectorsSKZ2050-5 is a portable pump suction gas detector that can simultaneously detect up to 5 different gases, and each gas can be customized with a different range.Features:★It can detect 1～5 kinds of gases at the same time, and the unit can be switched:Optional units: PPM, mg/m3, VOL%, LEL%, PPHM, ppb, mg/L★Built-in pumping measurement, integrated water vapor and dust filter, quick response,&

SKZ0154 Universal Tensile Testing MachineFor tensile, compression, bending, shear, tear, peel performance test.Feature1.Use of the Windows 7 operating system platform, graphical and graphical software interface, flexible data processing, modular programming language (VB), and safety limit protection are features of the measurement and control software.2. With the ability to automatically create algorithms and change test reports3.

Products DescriptionHot Selling Yarn Length Tester SKZ193BApplications:By the winder, the sample yarn on the through tube can be winded into skein yarns with a reel and the reeling tension be measured. It is used to measure a yarn length, designed for yarn linear density (or count) measurement and skein yarn strength test. Standard:ISO 2060.2, ISO2060, ASTM D1907, GB4743- 95Features: 1.Timing cog belt of direct transmission, no-lap skid. 2.Countint by optocoupler.

Laboratory Rotary Digester Testing EquipmentFeatures1. Versatility: It is designed for caustic cooking and acid cooking, and can also be used for cooking and bleaching of other liquidswith a work pressure not exceeding 8Kg/cm².  This versatility allows it to be used in a wide range of chemical processes.2. Durable Construction: The device is primarily composed of high-quality stainless steel, which ensures high corrosion resistance and longevity.3.

SKZ108C Bursting Strength Of PaperApplicationUsed to detect a range of paper products and thin cardboard layers with a maximum density of 2000 kpa. It may also be used to detect different types of single and multi-layer cardboard, corrugated cardboard, silk cotton, and other non-paper items.StandardsISO2759, ISO 2758. PrincipleIt uses a button for signal transmission.

SKZ101A Tensile Testing MachinePaper and board are tested for tensile strength using this apparatus, which has an accurate auto control and data gathering system.Characteristic1) Touch screen display in color.2) A large range of steady and effective adjustments can be made to the test force.3) Show real-time test force, test speed, and test displacement.4) Following a test, it can automatically revert to its initial position.5) Equipped with overload, overcurrent, and limit position protection.6.

Product DescriptionDigital Textile Thickness Gauge SKZ185 Used to thickness determination for a variety of woven fabrics, knitted fabricsStandard: GB/T3820, FZ/T01003, ISO5084/9073/9863, ASTM D1777.Features:1. Digital display, with the adoption of electric elevating system, static balancer with a pulley, automatic timer and an electronic dial indicator for reading display.2. Using wear-resistant agate bearing is used as the guider and the rolling bearings are adopted for other transmission countershafts.3.

Lab Perspiration Fastness Tester Perspirometer SKZ158 Application:Used for testing the color fastness to perspiration of all textiles and the performance of the color fastness to water, sea water and saliva of all be painted and colored textiles.Standards: Sweat-resistance: GB/T3922, AATCC15, ISO105 Seawater-resistance: GB/T5714, AATAA107, ISO105 Distilled water-resistance: GB/T5713, AATCC106, ISO105Principle About AATCC15: Colored specimens and other fibrous materials (for staining) are joined, immersed in a simulated acidic perspiration solution, subjected to a fixed mechani

SKZ1041B Laboratory TurbidimeterFor measuring suspended in water insoluble particulate count generated via the diploma of mild scattering, to get the content material of suspended particulate matter. Widely used in energy plants, pure water plant, water plant life and home sewage therapy plants, beverage plants, the environmental safety departments, industrial water, wine enterprise and the pharmaceutical industry, epidemic prevention departments, hospitals and different 

Lab LED ISO 7027 Water Turbidity Meter Turbidimeter Turbidity Measurement Tester TU200GENERAL FEATURES1. 850nm LED light Source.2. Uses Nephelometric principle with 90° detection.3. Meets ISO 7027 and offers consistent light source for higher accuracy.4. Selectable turbidity units, including the NTU, FNU and EBC.5. Settable parameters, including user ID, number of calibration points, data and time, etc.6.

Hand Sheet Former SKZ124BAutomatic type hand sheet former, small dimension more precision and easy to operate, especially get rid of the air-pressure of traditional sheet former. Its sheet diameter Φ200, white water cycle, electromagnetism valve drain automatically, mini-type vacuum system. Main Accessory：copper mesh frame, Paper-making roller, copper mesh 60mesh or 80mesh, up and down water circulative system, air bubble smooth pulp sytem.ParameterCanister diameter200mmCanister capacity 8LPower 463WDimension 500mm×600mm×1300mm

SKZ139 Rubber compression Deformation TesterContain by parallel steel plates, limiters and fasteners, used for vulcanized rubber, thermoplastic rubber in room temperature, high temperature and low temperature conditions, at a constant compression rate, after a certain compression time determination of the amount of deformation of rubber. Standard: ASTM-D395,ISO815.Technical parameters:Sample A: dia. 29mm, height: 12.5mmB: dia. 13mm, height: 6.3mmLimiters heightcompression rate 25%A: 9.3 ~ 9.4 B: 4.7 ~ 4.8Compression rate 15%A: 1