Laboratory Turbidimeter SKZ1041AFor measuring suspended in water insoluble particulate matter generated by the degree of light scattering, to get the content of suspended particulate matter. Widely used in power plants, pure water plant, water plants and domestic sewage treatment plants, beverage plants, the environmental protection departments, industrial water, wine industry and the pharmaceutical industry, epidemic prevention departments, hospitals and other departments of the turbidity measurement. Principle:Turbidity, also called turbidity of water or transparent liquid.
Contact Now
Product DescriptionDigital Benchtop Turbidity Meter Turbidimeter TU4000E Application: Surface water, groundwater, domestic drinking water, secondary water supply, swimming pool water, industrial water.General Features1. 7 inch colorful touch screen.2. Tungsten lamp light source met USEPA 180.1 requirement.3. 3 photodiodes to ensure high accuracy.4. 1-8 points calibration using Formazin standards or zero water.5. Autoranging from 0-4000 NTU.6. Data Storage capacity of 1000 sets (GLP-compliant).7.
Contact Now
TU200P Portable Digital Turbidimeter Liquid Turbidity Meter Tester With Turbidity Sensor GENERAL FEATURE1. 850nm LED light source. 2. 90° detection of the Nephelometric principle. 3. ISO 7027, and offers consistent light source for higher accuracy. 4. Selectable turbidity units, including NTU, FNU and EBC. 5. Auto-power-off function.6. IP65 waterproof rating. Portable meter is suitable for field measurement and outdoor measurement.7.
Contact Now
TU1000P Portable TurbidimeterGENERAL FEATURE850nm LED light Source.Uses Nephelometric principle with 90° detection.Meets ISO 7027 and offers consistent light source for higher accuracy.Selectable turbidity units, including the NTU, FNU and EBC.Settable parameters, including user ID, number of calibration points, data and time, etc.Auto-power-off feature effectively extends the battery usage time.IP65 waterproof.
Contact Now
Lab LED ISO 7027 Water Turbidity Meter Turbidimeter Turbidity Measurement Tester TU200GENERAL FEATURES1. 850nm LED light Source.2. Uses Nephelometric principle with 90° detection.3. Meets ISO 7027 and offers consistent light source for higher accuracy.4. Selectable turbidity units, including the NTU, FNU and EBC.5. Settable parameters, including user ID, number of calibration points, data and time, etc.6.
Contact Now
SKZ1055 Differential Thermal AnalyzerDifferential thermal analysis: temperature under program control, the relationship and difference of temperature between the measured material and the reference.The DTA curves is to describe the changing relationship depending on temperature and time between the measured material and the reference compound. During the test, the sample temperature changes due to the phase change or an endothermic or exothermic reaction effects.
Contact Now
Electrical Conductivity Meter EC310T General Feature1. Colour high contrast LCD touch screen, 4.3 inches2. Multi-reading function allows automatic, timed and continuous readings3. Automatic/manual temperature compensation ensures accurate results 4. Auto hold function senses and locks the endpoint of the measurement.5. 500 data sets per parameter (GLP compliant)6. Supports USB communication7. Auto Power Off function extends battery life.8. Reset function automatically restores all settings to factory defaults9.
Contact Now
SKZ107A Elmendorf Tear TesterIt is a specialized tool used to measure the strength of paper tears.
Contact Now
Burst tester is the basic instrument for testing the anti-bursting degree of paper or cardboard, using Mullen test methods. ApplicationUsed to determine a variety of paper and not more than 2000kpa monolayer of thin cardboard, or a variety of single and multi-layer cardboard and corrugated cardboard can also be used to detect silk cotton and other non-paper products.StandardsISO 2759, ISO 2758. PrincipleIt adopts signal transmitting press.
Contact Now
Burst tester is the simple instrument for checking out the anti-bursting diploma of paper or cardboard, the usage of Mullen check methods. ApplicationIt is used to decide a range of paper and no longer extra than 2000kpa monolayer of skinny cardboard, or a range of single and multi-layer cardboard and corrugated cardboard can additionally be used to notice silk cotton and different non-paper products. StandardsISO2759, ISO 2758. PrincipleIt adopt
Contact Now
Product DescriptionDigital Ec Meter Water Conductivity Meter EC500T Feartures:1. Color High contrast LCD touchscreen, 7.0 inches.2. Intelligent operation system provides features including user management, calibration management, method management, data management and etc.3. Multi-reading feature allows auto-read, timed-read and continuous-read.4. Automatic/Manual temperature compensation ensures accurate results.5. Data Storage 1000 sets for each parameter (GLP-compliant).6. Data analysis feature helps user review, compare and recalculate results.7.
Contact Now
Mechanical Elmendorf Tearing TesterIt is the special instrument for paper tearing strength test. Standard: ISO 1974(paper--tearing strength test method), GB455.1, Technical parameter:parameterindexTest range(10～1000)Mn, Standard arm and Light arm are the standard fittings.Lightest arm special customization according to need.Standard arm(10～1000)mN，degree minimum: 10mNLight arm (10～500)mN, degree minimum: 5mNLightest arm (10～200)mN, degree minimum: 2mN (extra charge)VeracityErrorMaximum range20%～80% ±1%, out range±0.5%FSRepeat errorMaximum range20%～80% ≤1%, out range
Contact Now
SKZ1018B Karl Fischer Volumetric TitrationKarl Fischer titration method is utilized by the auto-analyzer to determine moisture content.Standards:ISO 10337,ASTM D 1744, ISO 760 , ASTM E203Qualities:1.A new speed drop function that measures a sample in tens of seconds using automatic control electrode polarization voltage drop speed2.Having an extra current meter makes the titration procedure easier to understand.3.Specially selected materials with exceptional corrosion resistance make up the whole fluid route, ensuring long-term continuous operation.4.The termination titration, which uses
Contact Now
Volumetric Karl Fischer Titration SKZ1018BIt is auto-analyzer used Karl Fischer titration method,determination moisture content.Standards:ISO 10337,ASTM D 1744, ISO 760 , ASTM E203Features:1. New speed drop function, use automatic control electrode polarization voltage drop speed, measure a sample requires only tens of seconds2. Additional current meter makes the titration process more intuitive3. Entire fluid path is made of special materials selection, excellent corrosion resistance, to ensure long-term continuous operation4.
Contact Now
Ti-50 Automatic Potential TitratorSupport titration modes: DET (dynamic equivalence point titration), MET (monotone equivalence point titration), SET (Preset Endpoint Titration) and MAT (manual titration). pH calibration and measurement are supported. Up to 100 user-defined methods and 10 user-defined shortcuts. Auto calculation with pre-defined formula. Store up to 200 titration data sets (GLP-compliant). Data analysis feature helps user review, compare and recalculate results. Data can be easily transferred to printer via RS-232 communi
Contact Now
It is auto-analyzer used Karl Fischer titration method,determination moisture content.Standards:ISO 10337,ASTM D 1744, ISO 760 , ASTM E203Features:1. New speed drop function, use automatic control electrode polarization voltage drop speed, measure a sample requires only tens of seconds2. Additional current meter makes the titration process more intuitive3. Entire fluid path is made of special materials selection, excellent corrosion resistance, to ensure long-term continuous operation4.
Contact Now
SKZ1018B Efficient Moisture Volumetric Titration EquipmentThe SKZ1018B represents an advanced auto-analyzer that harnesses the Karl Fischer titration methodology for precise moisture content determination, adhering to renowned international standards such as ISO 10337, ASTM D 1744, ISO 760, and ASTM E203.
This state-of-the-art instrument comes packed with a suite of unique features designed to enhance performance and user experience:
1. A revolutionary speed drop mechanism has been implemented, which leverages automated control of the electrode polarization voltage drop pace.
Contact Now
SKZ1013 Automatic TensiometerThe automatic surface tensiometer consists of a highly precise and stable force measurement system, a microcomputer control system, and a platinum plate (ring) measurement device. It is designed to be compact, with a simple and reliable structure, and easy to operate either in automatic or manual mode. This device offers various features such as net weight measurement throughout the entire range with a one-key minimum clearing function, automatic calibration for the entire range, excellent repeatability, and accurate and reliable test results.
Contact Now
Automatic Surface Tension Meter SKZ1013Automatic surface tensiometer, made up of high precise and stable force measurement system, microcomputer control system, platinum plate (ring) measurement device, is compact in design, simple and reliable in structure, easy in operation (automatic/manual). It features net weight in whole range (one-key minimum clearing), whole range automatic calibration, good repeatability, accurate and reliable test result as well as liquid crystal display of test data with RS232C output interface. Features: 1.
Contact Now
SKZ1043B Automatic Potentiometric TitratorApplication: Widely used in food additives, food safety, pharmaceutical production, petrochemical, quality control, research institutionsTypical titration applications: Features: 1. The compact designed integrated titrator and convenient automatic titration system a). Burette valve integrated design, easy to replace, avoid different titration, mutual interference of different solutions b).
Contact Now
SKZ1013 Automatic surface tension MeterProgrammed surface tensiometer, comprised of high exact and stable power estimation framework, microcomputer control framework, platinum plate (ring) estimation gadget, is conservative in plan, basic and dependable in structure, simple in activity (programmed/manual).
Contact Now
SKZ108C Bursting Strength Of PaperApplicationUsed to detect a range of paper products and thin cardboard layers with a maximum density of 2000 kpa. It may also be used to detect different types of single and multi-layer cardboard, corrugated cardboard, silk cotton, and other non-paper items.StandardsISO2759, ISO 2758. PrincipleIt uses a button for signal transmission.
Contact Now
Automatic Potentiometric Titration Titrator Ti-50GENERAL FEATURES1. 7” colorful touchscreen and smart guide system.2. Titration methods, curves and results are displayed in detail.3. 1 extra burette driver can be installed (optional).4. Replaceable burette with high-accuracy (10 ml or 20 ml selectable).5. Intelligent operation system provides features including user management, method management, electrode management, titrant management, data management, etc.6. Support the following titration modes: DET (dynamic equivalence point titration), MET (monotone equ
Contact Now
SKZ107B Elemendorf Internal Tearing Resistance Strength Tester EquipmentUsed for paper tearing strength test as well as cardboard low-tearing strength test by Elemendorf method. Standard: ISO 1974(paper--tearing strength test method), ASTM D689-03 Standard Test Method for Internal Tearing Resistance of Paper, GB455.1, ISO6383/2-1983 FeatureIt can test automatically, LCD displays data. The tester is incorporated with mechanize and electrization.
Contact Now
