Tensile Testing Equipment-manufacture,factory,supplier from China

SKZ101A Tensile Testing MachinePaper and board are tested for tensile strength using this apparatus, which has an accurate auto control and data gathering system.Characteristic1) Touch screen display in color.2) A large range of steady and effective adjustments can be made to the test force.3) Show real-time test force, test speed, and test displacement.4) Following a test, it can automatically revert to its initial position.5) Equipped with overload, overcurrent, and limit position protection.6.

SKZ0154 Universal Tensile Testing MachineFor tensile, compression, bending, shear, tear, peel performance test.Feature1.Use of the Windows 7 operating system platform, graphical and graphical software interface, flexible data processing, modular programming language (VB), and safety limit protection are features of the measurement and control software.2. With the ability to automatically create algorithms and change test reports3.

SKZ0154 Universal Tensile MachinePerformance tests include tensile, compression, bending, shear, tear, and peel.Feature1.Using the Windows 7 operating system platform, measurement and control software has a graphical user interface, flexible data processing, modular programming in VB, and safety limit protection.2. Equipped with automated algorithm development and automated test report editing features.3. Determine the elastic modulus, average peel force, maximum force, yield strength, and non-proportional yield strength. introduction of control software1.

Laboratory Rotary Digester Testing EquipmentFeatures1. Versatility: It is designed for caustic cooking and acid cooking, and can also be used for cooking and bleaching of other liquidswith a work pressure not exceeding 8Kg/cm².  This versatility allows it to be used in a wide range of chemical processes.2. Durable Construction: The device is primarily composed of high-quality stainless steel, which ensures high corrosion resistance and longevity.3.

Ozone aging test chamber is one of the climate simulation test equipment for testing vulcanized rubber in the static and dynamic tensile deformation state, exposure to air containing a certain concentration of ozone and a certain temperature environment, but no direct sunlight under the harsh Adaptability test conditions for a variety of research institutes and factories and mines laboratory test samples for the aging test.

Auto Paper Tensile Tester SKZ101AIt is used to test the Tensile strength test of paper and board, It adopts precise auto control and data acquisition system.  Feature 1) Color touch screen display.2)The test force can be adjusted in a wide range, stable and effectively.3) Display test force, test speed and displacement at real time.4) It can automatically return to the original position after test.5) With limit position protection, over load protection and over current protect.6).

For tensile, compression, bending, shear, tear, peel performance test.Feature1.Measurement and control software using Windows 7 operating system platform, graphical and graphical software interface, flexible data processing, modular programming language VB, safety limit protection.2.With automatic algorithm generation, automatic test report editing capabilities3.

SKZ126A Vibration Testing MachineThis tester can be used to mimic transport testing for a variety of products, including toys, electronics, furniture, presents, ceramics, packaging, and other items.

SKZ148 Drop Dart Impact TesterThe impact resistance of plastic films and sheets is tested using a dart impact testing equipment, which uses a background light source to record test findings.StandardISO7765-85, GB9639-88, ASTM D1709 - 09 Technical parametersDart-head weight50-2000g, 5g/incremental (5g*5pcs,15g*15pcs, 30g*10pcs, 45g*10pcs, 80g*10pcs, 90g*15pcs)Dart-head semi-diameterA method: R19±1mm,B method: 25±1mmDart-head accuracy0.1%Impact height660mm, 1500mmImpact energy30JSample clamp deviceexternal dia.: 150mm, inside dia.: 125mmWorking t

SKZ101-16C Single Yarn Strength TesterFor a variety of fiber and metal filaments dry (wet) tensile test.Standards:ISO5079 , ISO11566Maximum load test200cN, test error: 0.2% (F.S), sensitivity: 0.01cNElongation range≤100mm, Resolution: 0.01mmTest speed1 ~ 200mm / minTest MethodBuilt-in 3 kindsClamping distance10 mm, 20 mmOutputliquid crystal display, print outputPowerAC220V ± 10% 50Hz 100WDimensions1000 × 420 × 460mmWeight30Kg

SKZ1061C Thermal Conductivity Testing Equipment PriceIt can be used for a number of warmth conduction residences of one-of-a-kind kinds of substances testing. Transient Plane Source technique is to learn about the thermal conductivity method, the ultra-modern one, which makes size technological know-how to a entire new level. In the find out about of cloth succesful of speedy and correct size of thermal conductivity for the employer first-class control, fabric manufacturing and laboratory research grant a outstanding convenience.

SKZ1011 COF Equipment Friction Coefficient Tester Standards:ISO8295, ASTMD1894, TAPPIT816Technical parameters:Dimension of slider63×63 (mm)Weight of slider200±2g (500g)Sample size80×200 (mm)Testing accuracy±0.5%Speed of slider100 mm/minRange0-5NStroke70mm, 150mmPower220V, 50HZDimension400×300×180 (mm)Weight30kgSKZ1011 FRICTON COEFFICIENT TESTERWe welcome customers to contact us for future businessrelationships and mutual success!High qualityproductFast DeliverySpecializedPerfect after-salesfactoryserviceSKZ INTERNATIONAL CO..

Used to test product packaging for damage and evaluate impact resistance and the transport handling process; mostly used to ensure that product packaging can withstand the circumstances of transport capacity and hence enhance and optimize packaging design.Standard:ISO2248, JISZ0202-87Qualities:With a digital height indicator and height tracking decoder, a single wing drop tester may perform a free drop test of the package's surface, angle, and edge.

SKZ172B Water Vapor Transmission Rate TestingTo determine Water-Vapour Permeability of fabric. Used for testing the moisture permeability of all kinds of fabrics, including moisture-permeable coated fabrics and nonwoven fabrics.Standards:ASTM E90-00 ASTM E96  JIS L1099A  BS 7209  JIS L1099BFeature 1. Rotary cup holder 2. Three layers test cup holder, suitable for high-volume testing 3. Three test areas, seperate air duct, temperature and humidity constant and uniform 4. Three test areas wind speed calibrated independently 5.

SKZ1053 High Pressure Automatic Thermogravimetric Analysis LabThermo gravimetric evaluation (TG, TGA) is to look at the exchange of pattern high-quality with temperature or time in the manner of heating and consistent temperature, the motive is to find out about the thermal balance and composition of the material.Widely used in the lookup and development, procedure optimization and satisfactory manipulate of plastics, rubber, coatings, pharmaceuticals, cat

High and low temperature test chamber is one of the climate simulation chambers for the assessment of various electronic products, test at high temperature, low temperature environment.Features:1.Unique balance thermostat, high precision, high temperature stability control.2.Temperature controller with high precision, high stability, PID self-tuning, LED visual display, to ensure precise control of equipment. Equipment with over-temperature3.

SKZ125 Rapid-kothen Sheet Former Paper Sheet Making Test MachineFeature: 1.Mainly composed by dryers, vacuum pumps, and sheet former (press)2.Sheet former parts: power-driven drain off water, white water cycle use, power-driven feed water, aerodynamic homogenate ( also can manual homogenate), Water molding or vacuum pump suction molding3.Dry parts adopt vacuum heating and drying, vacuum pump adopts water cycle, heating element use heating plate, temperature control system, and has a short circuit, disconnection, and automatic over-temperature alarm function, with a stop anti-oil

Shore hardness tester is applied to test the hardness of vulcanized rubber and plastic. The hardness head is installed on the stand. You can also take the head from the stand to carry spot testing.

This equipment is designed for testing the plasticity and resilience of raw rubber, plastic rubber, and rubber. It requires precise temperature control and a digital instrument for setting and displaying temperature and time.Standard:GB/T12828 and ISO7323-1985.Technical parameters:Specimen suffered pressure49N±0.05NTemperature control70℃±1℃ (optionally set in the range of 100℃)Time range 3minIndicating range0-30 (mm)Indicating accuracy0.01mmPower 220V, 50HZ, 700WDimension 360×280×570 (mm)Net weight35kg

SKZ1062E Spray Laser Particle Size AnalyzerScopeIt is suitable for the detection of droplet size in small spray equipment such as medical nebulizers, atomized medicines, various aerosols and sprays. Feature1.Compact, portable achieve a real sense in the field of particle size analyzer2.Advanced integrated structural design, more stable3.Optical path combines advanced dust-proof design, without the need for secondary adjust the optical path, greatly improving test efficiency1.    Advanced light path design:It adopts the Fraunhofer diffraction principle and typical parallel o

SKZ111B-4 Rice Polisher Machine1.Complete the whole process of rice husking and brown rice grinding at one time, which can quickly and truly judge the quality of rice.2.Rice milling white effect is good, simple operation, short working time, dust leakage, beautiful appearance3.The head adopts high-tech alloy material, long service life, peeling, grinding white effect is good.4.Large sampling, operation, easy to carry, is the best equipment to judge the quality of rice, test yellow grain, sick class, belly white and imperfect particles.Sample weight170g (280ml)Fine rice broken rateJaponica rice

SKZ1039 LED Disc Polarimeter Application Polarimeter Apparatus Polarimeter AnalyzerPolarimeter is the testing instruments to measure the optical rotation of material. By measurement of optical rotation of the sample can be analyzed to determine the concentration of substance, the content and purity. Widely used in pharmaceutical, drug testing, sugar, food, spices, MSG and chemical and oil industry. Features:1. Visual type2. manual measurement3.  Economic price4.

SKZ1011 Friction Coefficient Tester (Cof Testing Machine)Used to measure the plastic film's dynamic and static friction coefficient while it slides, allowing the packing machine's speed and bag opening to be adjusted.Qualities:1. LCD display: data, curves, and outcomes2. Test for static and dynamic friction coefficients3. Results analysis and output printing for both individual and group tests4.

SKZ128 Portable Rubber Shore Hardness Testing MachineStandard:ISO7619-1:2004: Rubber, vulcanized or thermoplastic--Determination of indentation hardness-part 1: Duromerer technique ( shore hardness)ISO 868:2003: Plastics and ebonite-Determination of indentation hardness through skill of a duromerer ( shore hardness)Technical parameters:Diameter of pressure needle1.25mm±0.15mmEnd diameter of needle0.79mm±0.03mm (Shore A), R0.1±0.012mm (Shore D)Pressure needle taper angle35°±0.25°Pressure needle trip0- 2.5mm±0.04mmRange of scale0HA-100HA (Shore A), 0-