Laboratory Pulp Standard Fiber Disintegrator Wet DisintegrationLaboratory Pulp Disintegrator (also known as standard fiber Disintegrator, standard fiber stirrer), Suitable for laboratory wet disintegration of pulp: the disintegration is to separate the interwoven fibersin water after mechanical processing, and meanwhile to maximum remain fiber original structure properties unchanged, in order to ensure the experiment to obtain reliable data, using the original scientific research and production of effective, economy. Standards:ISO5263, JIS-P8220, TAPPI-T205Te
Contact Now
Laboratory Pulp Disintegrator (also known as standard fiber Disintegrator, standard fiber stirrer), Suitable for laboratory wet disintegration of pulp: the disintegration is to separate the interwoven fibers in water after mechanical processing, and meanwhile to maximum remain fiber original structure properties unchanged, in order to ensure the experiment to obtain reliable data, using the original scientific research and production of effective, economy. Standards:ISO5263, JIS-P8220, TAPPI-T205
Contact Now
Fiber Classifier (Bauer Fiber Classifier) is the equipment used for measuring the weight-average fiber length of pulp fiber according to screening method by pulp and paper-making laboratory. Principle:Screening the pulp suspension into the vessel, the vessel is charged with mesh sieve, Container into a ladder type, the pulp suspension flows from one container to another container, in various different sieve to retain the fiber length pulp, retention of pulp fiber length and the sieve mesh size.
Contact Now
Product DescriptionHigh Quality Fiber Fineness AnalyzerFor the measurement of fiber diameter, cross-sectional analysis and textile content. Projection microscope method,Mode of operation: manual measurement (A type), automatic measurement (B type), multi-point measurement; automatic statistical analysis, report printing, photo printing.Standards: GB/T 10685, FZ/T30003, AATCC 20A, SN/T0756Features:1. fiber qualitative analysis: FZ / T 01057.3 《textile fiber identification method of the third part of the microscopy experiments.》 AATCC 20 《fiber qualitative analysis.》 2.
Contact Now
Vibrating vacuum suction, so that compliant pulp fibers from open screening leak continues, not meet the requirements of fiber and wood residues left in the screen plate above, and then removed from the slag hole.Screening of impurities was measured in the pulp debris impurities, Use the pulp screen machine can reduce the number of impurities in the pulp suspension, get clean good pulp. Features:1. Adopt international standards, stainless steel tube frame, the main components made of stainless steel and copper.2.
Contact Now
SKZ1027A/B/C/D Laboratory Valley Pulp BeaterLaboratory Valley pulp Beater, mechanical forces generated by the roll and the bottom knife, the fiber pulp was cutting, crushing, kneading, split, moistening and fiber thinning, meanwhile, the fiber cell wall displacement and deformation generated, the primary wall and outer wall broken.
Contact Now
SKZ101-16C Single Yarn Strength TesterFor a variety of fiber and metal filaments dry (wet) tensile test.Standards:ISO5079 , ISO11566Maximum load test200cN, test error: 0.2% (F.S), sensitivity: 0.01cNElongation range≤100mm, Resolution: 0.01mmTest speed1 ~ 200mm / minTest MethodBuilt-in 3 kindsClamping distance10 mm, 20 mmOutputliquid crystal display, print outputPowerAC220V ± 10% 50Hz 100WDimensions1000 × 420 × 460mmWeight30Kg
Contact Now
SKZ1030 Laboratory Flotation CellFlotation deinking method is based on the principle of mine ore, according to the fiber, filler and ink composition of wettable, flotation cell in the 10 to 150 micron ink particles adsorbed on the air bubbles, floating to the surface to remove the pulp, fiber and filler remained in the pulp.It is mainly composed of a flotation tank, the circulation line, paper pulp pump, air bubble generating device, liquid discharging pipe. Parameters:Outfall up and down range of activities0 --100Flow calculation controlYes Tank capacity28 litersTank sizeΦ380 × 380mmTank
Contact Now
SKZ1016-1 Cap Torque TesterMeasuring bottled products locking and opening torque values. High accuracy, good stability.Features:1. Microcomputer control2. Test data: continuous acquisition or automatically to maintain peak3. Dual-mode design: locking force, opening force4. Test results using the standard unit, without manual conversion5. Intelligent fault indications, overload protection6. Compact, easy to operate, reliable performanceTechnical parameters:Accuracy1gradeSystem Resolution0.01NmClamping rangeΦ15mm ~ Φ160mmMeasuring range0 - 5N.
Contact Now
Used for testing the stiffness of all kinds of woven and knit goods, nonwoven fabrics and coated fabrics, including cotton, wool, silk, linen and chemical fiber, and also of flexible materials such as paper, leather, filmRelevant Standards:ZB WO4003, ISO 9073, ASTM D 1388, ISO9073-7, BS En22313Warranty1 yearCustomized supportOEMPlace of OriginChinaShandongBrand NameSKZWorking patternMicro-computer controlled, infrared stealth slant detecting, liquid crystal display, printing out testing resultsTesting range40.5, 43, 45( adjustable)Extension elongation0.5-20.5cmTesting accuracy0.01 cmSpecimen s
Contact Now
The Auto-pneumatic Cutter Press is driven by air pressure only. lt is suitable for laboratory to punch every kind of standard specimens from rubber, plastic, leather Standard: ASTM-D412Technical parameters:TypesPNEUMATICMoving distance25mm～100mmWorking platform320 mm×220 mmSpecimen thicknessmaximum 10mmAir pressure0.6MPaDimension380mm×260mm×590mmNet weight40kg
Contact Now
LCD Melt Flow Indexer MRF MVR Meter ISO1133 400degree MFI EquipmentStandards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics —Part 1:Standard methodISO 1133-2:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics —Part 2: Method for materials sensitive to time temperature history and/or moistureGBT 3682.1-2018 "Plastic Thermoplastic Melt Mass Flow Rate (MFR) and Melt Volume Flow Rate (MVR) Determination"ASTM D1238-2013 "Standard Test Method
Contact Now
Mechanical Elmendorf Tearing TesterIt is the special instrument for paper tearing strength test. Standard: ISO 1974(paper--tearing strength test method), GB455.1, Technical parameter:parameterindexTest range(10～1000)Mn, Standard arm and Light arm are the standard fittings.Lightest arm special customization according to need.Standard arm(10～1000)mN，degree minimum: 10mNLight arm (10～500)mN, degree minimum: 5mNLightest arm (10～200)mN, degree minimum: 2mN (extra charge)VeracityErrorMaximum range20%～80% ±1%, out range±0.5%FSRepeat errorMaximum range20%～80% ≤1%, out range
Contact Now
SKZ1043B LCD Potentiometric Titration MeterFeatures: 1. The compact designed integrated titrator and convenient automatic titration system a). Burette valve integrated design, easy to replace, avoid different titration, mutual interference of different solutions b). Automatic identification pH standard solution group (standard solution group 1:4.00 pH, 6.86pH, 9.18pH; standard solution group 2:3.78 pH, 7.00pH, 10.01pH), supports manually identify c).
Contact Now
SKZ1044B Flame Photometer Digital Flame Photometer Flame photometer is a relative measurement of the instrument, the concentration value of the sample under test conditions in the same relative value of the concentration of the standard solution. So before the test, you must first prepare a set of corresponding standard solution.
Contact Now
Wet Method Laser Particle Size Analyzer SKZ1062ATechnical parameter: Standard: ISO133201. Measuring range: 0.1~800 μm (SKZ1062A), 0.02~1200 μm (SKZ1062A-1)2. Accuracy tolerance: ± 1% (national standard D50) 3. Deviation of repeatability: ± 1% (national standard D50) 4.
Contact Now
SKZ1015 Vacuum Drying ChamberThe drying oven is capable of heat treatment, baking, sterilizing, and drying. Its digital display and stainless steel tank allow it to operate at a temperature that can be freely adjusted to the maximum point from room temperature.Technical parameters:voltage220V 50HzTemperature control rangeRT+10℃～250℃Temperature resolution0.1℃Constant temperature fluctuation±1℃input power1120WWorking temperature5℃～40℃Liner size (mm)420×400×345Dimensions (mm)720×580×530Load carrier (standard)2pcsTiming range1～9999 minutes
Contact Now
SKZ2300 4mm 8mm 16mm Portable Spectrophotometer Color Difference Meter 1、Storage●Upon long time no use , cut off external power and remove the battery to avoid damage to the instrument resulting from battery fluid overflow.●Store in a cool, dry environment with a temperature of -20 ° C ~ 50 ° C and a relative humidity of 85% or less.2、Application●Keep the standard whiteboard clean and avoid contamination of the standard whiteboard with stains, dust, etc.●When using the instrument, the ambient temperature is 0 ° C ~ 40 ° C, the relative humidity is 85%, no condensation.●Avoid usi
Contact Now
Standard: ISO1133 Feature:1. LCD display, time, temperature and sample times can be set.2. Built-in printer 3. Automatic cutting4. MFR test item Technical parameters:Test methodMFR (unit: g / 10min)Temperature rangeroom temperature ~ 300 ℃Temperature accuracy± 0.5 ℃Temperature Resolution0.1 ℃Measuring range0.1 ~ 300g / 10min (MFR)load3.187 ~ 211.82N is divided into eightBarrel diameterф9.55mm ± 0.025mmDie apertureΦ2.095 ± 0.005mmPowerAC220V±10% 50Hz 1kWDimension300mm×400mm×500mmWeight 35kg
Contact Now
Digital Flame Photometer SKZ1044AFlame photometer is a relative measurement of the instrument, the concentration value of the sample under test conditions in the same relative value of the concentration of the standard solution. So before the test, you must first prepare a set of corresponding standard solution.
Contact Now
Microscopic Thermal Analyzer SKZ1040A-1Be used as the melting point of trace samples for determination, but also for biological engineering thermodynamics research in medicine, chemical, synthetic fiber, biology, mineralogy, criminology. Feature1.Using PWM pulse program to control temperature and color touch screen display.2.With 3000 sets of test data storage.3.
Contact Now
High Quality Concora Medium Fluter (CCT, CMT) SKZ113To determinate of flat crush strength of corrugated paper when pressed standard waveform (i.e., from the flute corrugated base paper), comply with standard: ISO7263-1985: corrugating medium – Determination of flat crush resistance after laboratory fluting.Feature: 1.Using single-chip microprocessor control technology, Precision temperature controller
Contact Now
Falling ball impact tester is suitable for all kinds of plastic sheet impact test. Standard: ASTM D639-81(1985): STANDARD methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball(falling ball) Working principle:On the lift beams, equipped with a control device for controlling the falling ball, release the ball, the impact of the sample, so that to achieve the purpose of testing. Impact energy can be calculated according to the weight and height of the ball.
Contact Now
M310F-A Multi-parameter AnalyzerPH1.1-5 points calibration with Standard Recognition.2.Selectable pH buffer groups, including NIST, DIN, GB, USA.3.Automatic electrode diagnosis with pH slope and offset display.
Contact Now
