SKZ1013 Surface Tension MeasurementThe small design of the automatic surface tensiometer, which consists of a microcomputer control system, a platinum plate (ring) measurement device, and a highly precise and stable force measurement system, makes it easy to operate both manually and automatically.
Contact Now
SKZ1013 Automatic TensiometerThe automatic surface tensiometer consists of a highly precise and stable force measurement system, a microcomputer control system, and a platinum plate (ring) measurement device. It is designed to be compact, with a simple and reliable structure, and easy to operate either in automatic or manual mode. This device offers various features such as net weight measurement throughout the entire range with a one-key minimum clearing function, automatic calibration for the entire range, excellent repeatability, and accurate and reliable test results.
Contact Now
SKZ68 three-angle gloss meter can complete the measurement of multiple angles with one click, and the measurement of three angles can be completed at the same time with one operation. IS0 2813 provides three kinds of measuring light incident angles, the three incident angles of the mirror gloss meter are 20°, 60°, 85°.StandardIS02813, 1S07668, ASTM D523, ASTM D2457, GB/T9754, GB/T13891, GB/T7706, GB/T 8807, JG 696-2002Advantages:1.One button to complete triangle measurement: one operation can complete three angle measurement; Measuring light incident angle meet ISO 2813 three me
Contact Now
TU4000E Turbidity MeasurementGENERAL FEATURES7” colorful touchscreen.Tungsten lamp light source met USEPA 180.1 requirement.3 photodiodes to ensure high accuracy.1-8 points calibration using Formazin standards or zero water.Autoranging from 0-4000 NTU.Data Storage capacity of 1000 sets (GLP-compliant).
Contact Now
Automatic Surface Tension Meter SKZ1013Automatic surface tensiometer, made up of high precise and stable force measurement system, microcomputer control system, platinum plate (ring) measurement device, is compact in design, simple and reliable in structure, easy in operation (automatic/manual). It features net weight in whole range (one-key minimum clearing), whole range automatic calibration, good repeatability, accurate and reliable test result as well as liquid crystal display of test data with RS232C output interface. Features: 1.
Contact Now
SKZ1016-1 Cap Torque TesterMeasuring bottled products locking and opening torque values. High accuracy, good stability.Features:1. Microcomputer control2. Test data: continuous acquisition or automatically to maintain peak3. Dual-mode design: locking force, opening force4. Test results using the standard unit, without manual conversion5. Intelligent fault indications, overload protection6. Compact, easy to operate, reliable performanceTechnical parameters:Accuracy1gradeSystem Resolution0.01NmClamping rangeΦ15mm ~ Φ160mmMeasuring range0 - 5N.
Contact Now
SKZ1013 Automatic surface tension MeterProgrammed surface tensiometer, comprised of high exact and stable power estimation framework, microcomputer control framework, platinum plate (ring) estimation gadget, is conservative in plan, basic and dependable in structure, simple in activity (programmed/manual).
Contact Now
Auto Paper Tensile Tester SKZ101AIt is used to test the Tensile strength test of paper and board, It adopts precise auto control and data acquisition system. Feature 1) Color touch screen display.2)The test force can be adjusted in a wide range, stable and effectively.3) Display test force, test speed and displacement at real time.4) It can automatically return to the original position after test.5) With limit position protection, over load protection and over current protect.6).
Contact Now
TU1000 Turbidity Measurement InstrumentGENERAL FEATURESLED light source at 850 nm.leverages the 90° detection concept of nephelometry.Complies with ISO 7027 and provides a steady light source for improved precision.Variable turbidity units, such as the EBC, FNU, and NTU.Configurable parameters, such as the user ID, data and time, number of calibration points, etc.High precision is ensured by two photodiodes.Calibration from 1-6 points utilizing zero water or Formazin standards.Autoranging between 0 and 1000 NTU.Up to 2000 sets of data can be stored (GLP-compliant).The computer may receive
Contact Now
SKZ0154 Universal Tensile MachinePerformance tests include tensile, compression, bending, shear, tear, and peel.Feature1.Using the Windows 7 operating system platform, measurement and control software has a graphical user interface, flexible data processing, modular programming in VB, and safety limit protection.2. Equipped with automated algorithm development and automated test report editing features.3. Determine the elastic modulus, average peel force, maximum force, yield strength, and non-proportional yield strength. introduction of control software1.
Contact Now
SKZ156B Elmendorf Tear TesterUsed to test the degree and burst force of leather, non-woven textiles, and materials while they are simultaneously under force in all directions (elastic diaphragm method).Standards: ISO2960, ISO13938.1-04, ASTMD3786, JIS1018Features: 1. Meeting the 50cm2 testing area requirements2. Support system for sample clamps3. Facilitating online correspondence Product ParametersTesting range0-2 Mpa (B type)The min. value0.002MpaTest area50cm2(Φ79.8mm), (B type)Elastic mold-plate size≤2mmThe max. burst length70±0.02mmThe max.
Contact Now
SKZ1050 Combustion Analyzer TVOC Total Organic Volatiles Gas Measurement VOC Detector Function1.The gas concentration compensation works in conjunction with temperature and pressure adjustment to create the ideal, varied temperature and pressure environment.2.Two alarm points with light and sound, each with customisable settings.3. A large-capacity rechargeable lithium polymer battery.4.
Contact Now
Analytical Electronic Balance SKZ-A 1.Using high-precision electromagnetic force balance sensor, more accurate, faster response, less fault.2.Weighing faster, and speed adjusted3. Weight units can be converted4. With counting function5. With Tared, cleared, accumulated, overloaded, under load display, fault alarm6. Built-in RS-232 interface, with the printer, computer connected ParametersModel SKZ-A1004SKZ-A 1104SKZ-A 1204SKZ-A 2004SKZ-A 2104SKZ-A 2204Max.
Contact Now
Product DescriptionDigital Bursting Strength Tester SKZ156B Used for testing the burst force and degree of fabrics, non-woven fabrics, leather, When under force in all directions at the same time (elastic diaphragm method).Standards: ISO2960, ISO13938.1-04, ASTMD3786, JIS1018Features:1. Meeting the testing area of 50cm2（Φ79.8mm） 2. Sample clamp support system 3. Supporting on-line communicationProduct ParametersTesting range0-2 Mpa (B type)The min. value0.002MpaTest area50cm2(Φ79.8mm), (B type)Elastic mold-plate size≤2mmThe max. burst length70±0.02mmThe max.
Contact Now
1. The device is equipped with microcomputer control for precise measurements of bottled products' locking and opening torque values, ensuring high accuracy and stability. 2. It allows for continuous acquisition of test data or automatic maintenance of peak values, enhancing efficiency. 3. With a dual-mode design focusing on locking force and opening force, it offers versatility in testing different aspects of torque values. 4. Test results are displayed using standard units, eliminating the need for manual conversion and streamlining the process. 5.
Contact Now
SKZ1050 Nitrogen N2 Gas MeasurementFunction 1.Environmental monitoring or detecting the presence of GAS in a restricted area and sounding an alarm2.Equipped with a self-check and zero calibration mechanism to ensure exceptionally accurate and dependable fuel monitoring3.One key that can be removed from overuse issues in order to fix the manufacturing unit settingsFeature 1.Using high-precision electrochemical ideas sensor that is imported2.LCD dot matrix display technology, which can display various information such as the type of petrol, the petrol unit, the petrol attention values,
Contact Now
SKZ129A Auto Akron Abrasion TesterStandardISO:4661-1:1993, ISO 2481:1988, ISO 471:1983, ISO 1826:1981Technical parameters:Tire suffered force26.7N (2.7kgf)Tire axis rotary speed76±2r/minWheel axis speed33-35r/minAngle between the two axis0°~45°PowerAC220V±10%Dimension600×480×400 (mm)Weight60kgProducts DescriptionSKZ129AAkron Abrasion TesterIS0:4661-1:1993I50 2481:1988IS0 471:1983I50 1826:1981The Angle between therubber wheel shaft and thegrinding wheel can beadjusted to 15°or 25°Stable base, strong structure.durable and now not handy to breakHigh exceptional
Contact Now
SKZ101A Tensile Testing MachinePaper and board are tested for tensile strength using this apparatus, which has an accurate auto control and data gathering system.Characteristic1) Touch screen display in color.2) A large range of steady and effective adjustments can be made to the test force.3) Show real-time test force, test speed, and test displacement.4) Following a test, it can automatically revert to its initial position.5) Equipped with overload, overcurrent, and limit position protection.6.
Contact Now
Laboratory pulp dehydratorThe effect of the centrifugal force of 1400r/min high speed rotation, in the pulp water out and reached a certain degree of dry, in order to ensure the reliable data. With the use of beating degree tester, it can obtain accurate pulp beating degree and humidity. Parameters:Drum SizeΦ126X100mmDrum capacity1.2LSpeed1400r/minTiming range01s ~ 999.9sPulp dryness20-30%PowerSingle-phase capacitor motor-180W-220VDimension570 × 225 × 460mmWeight30KG
Contact Now
SKZ120E Plastics Pipes Opacity TesterFor the determination of plastic pipes and fittings opacity measurement (displays the result as a percentage). Adopts Industrial Panel PC control, touch screen operation.
Contact Now
SKZ1031 Laboratory pulp Dewatering dehydrator Tester MachineThe effect of the centrifugal force of 1400r/min high speed rotation, in the pulp water out and reached a certain degree of dry, in order to ensure the reliable data.
Contact Now
SKZ129A Auto Akron Abrasion TesterStandard ISO:4661-1:1993, ISO 2481:1988, ISO 471:1983, ISO 1826:1981Technical parameters:Tire suffered force26.7N (2.7kgf)Tire axis rotary speed76±2r/minWheel axis speed33-35r/minAngle between the two axis0°~45°PowerAC220V±10%Dimension600×480×400 (mm)Weight60kgProducts DescriptionSKZ129AAkron Abrasion TesterIS0:4661-1:1993I50 2481:1988IS0 471:1983I50 1826:1981The Angle between therubber wheel shaft and thegrinding wheel can beadjusted to 15°or 25°Stable base, solid structure.durable and not easy to breakHigh quality digital display,display the number of wearre
Contact Now
SKZ-SY3020 Spectrophotometers 1. 400-700nm, full-band balanced LED ligh source 2. High precision: 0.01, accurate measurement 3. Manual input LAB value 4. Measuring aperture: 4mm or 8mm optional 5. Accurate results, one second measurement 6. All kinds of specimens can be tested 7. Multiple measurement modes available 8.
Contact Now
SKZ1017B Plastic Five points Heat Seal EquipmentThe Five-point heat-seal Tester, alternatively referred to as the gradient heat seal tester, is an instrument capable of establishing the optimal heat sealing temperature range, ideal packaging speed, and required heat sealing pressure for various materials such as plastic film substrates, flexible packaging composite films, and coated paper, which are all heat-sealable composite membranes.Structure:Divided into 4 components of the air force system, warmth sealing device, temperature manage system
Contact Now
