Schopper-Riegler Tester-manufacture,factory,supplier from China

Carbon black content tester is an instrument used to measure carbon black content in materials.The basic principle of the carbon black content tester is to quantitatively analyze the carbon black in the material by burning the carbon black in the sample in the oxygen environment.Method of applicationTo use the carbon black content tester, follow the following steps:Prepare the sample: Put 1g sample to be tested and put it into the combustion boat according to the test.Preheating: Turn on the tester, pass nitrogen for a few minutes, and set the temperature program.Place the sample: Place the pr

SKZ108A/B Mullen Bursting Tester is a basic instrument for testing the strength of paper and paperboard.

I'm sure the term Martindale wear test is not a new term for anyone in the textile field.The Martindale wear test means that textiles are tested according to the Martindale standard system, through which the wear resistance of the fabric is tested. Wear resistance refers to the resistance of the fabric to other materials during repeated friction with other materials.

The principle of SKZ1062A wet method laser particle size analyzer is to measure the particle size distribution of particles in solid powder or emulsion.

SKZ1050D gas analyzer is a data collector used in mine, tunnel engineering site, universities, scientific research laboratories, environmental monitoring, flue gas emissions, etc., which can quickly collect and analyze gas concentration components. The SKZ1050D gas analyzer can detect up to 18 gases simultaneously. It can integrate electrochemical, catalytic, thermal conductivity, infrared, photoion, ultraviolet and other detection principles, focusing on the accuracy of gas detection and user experience.Product characteristics1.

SKZ401 Rubber Vulcanizer is mainly used for vulcanizing flat type tape (such as conveyor belt, transmission belt, referred to as flat belt), belongs to hydraulic machinery, the main function of plate vulcanizing machine is to provide the pressure and temperature required for vulcanization. The pressure is generated by the hydraulic system through the hydraulic cylinder, and the temperature is provided by the heating medium (usually steam, thermal oil, etc., and superhot water is also useful).

Minimeta is a maintenance-free single gas detector that is the most reliable, user-friendly and cost-effective inspection solution for ensuring worker safety and operational compliance. It provides protection for up to 2 years - no calibration, no sensor replacement, no battery replacement or battery charging.

SKZ1052 high-precision differential scanning calorimeter is an instrument launched by SKZ for conducting material thermal analysis experiments. It can be used to test oxidation induction period, glass transition temperature, melting point, melting, enthalpy change, phase change, cold crystallization, crystallization, product stability, curing degree, cross-linking degree, specific heat capacity, reaction heat, etc. The instrument uses imported sensors with high sensitivity. Signal acquisition circuit shielding protection, strong anti-interference, and high baseline stability.

Laboratory pH meter (acidity meter) is an electrochemical analytical instrument used to measure the pH value of aqueous solutions. The pH meter adopts the potentiometric method, and the main measuring components are the reference electrode and glass electrode. The reference electrode is stable, while the glass electrode is sensitive.

This meter can test pH,mV, ORP, tesisitivity, TDS, salinity, dissolved oxygen and temperature in water solution, it is suitable used in lab for those units from industrial and mining enterprises,university and scientific research organ etc. There is a microprocessor chip inside the meter and the appearance of meter looks nice with easily operation.