Rubber Hardness Tester-manufacture,factory,supplier from China

(Total 24 Products for Rubber Hardness Tester)
SKZ128 Digital Rubber Hardness Tester Shore Hardness MeterShore hardness tester is applied to test the hardness of vulcanized rubber and plastic. The hardness head is installed on the stand. You can also take the head from the stand to carry spot testing.
  Contact Now
SKZ128A Shore A Hardness TesterThe shore hardness tester is used to measure the hardness of vulcanized rubber and plastic. The hardness head is mounted on a stand, but it can also be removed for spot testing.
  Contact Now
SKZ128 Portable Rubber Shore Hardness Testing MachineStandard:ISO7619-1:2004: Rubber, vulcanized or thermoplastic--Determination of indentation hardness-part 1: Duromerer technique ( shore hardness)ISO 868:2003: Plastics and ebonite-Determination of indentation hardness through skill of a duromerer ( shore hardness)Technical parameters:Diameter of pressure needle1.25mm±0.15mmEnd diameter of needle0.79mm±0.03mm (Shore A), R0.1±0.012mm (Shore D)Pressure needle taper angle35°±0.25°Pressure needle trip0- 2.5mm±0.04mmRange of scale0HA-100HA (Shore A), 0-
  Contact Now
SKZ128 Digital Shore Hardness Tester Plastic and rubber that have been vulcanized are tested for hardness using a shore hardness tester. The stand holds the hardness head in place. To perform spot testing, you can also remove the head from the stand.
  Contact Now
SKZ128A Durometer Hardness Tester For RubberA shore hardness tester is used to determine the hardness of vulcanized rubber and plastic.The hardness head has been mounted on the stand.
  Contact Now
Shore hardness tester is applied to test the hardness of vulcanized rubber and plastic. The hardness head is installed on the stand. You can also take the head from the stand to carry spot testing.
  Contact Now
SKZ136 Rubber Impact Resilience TesterRubber Impact Resilience Tester is the pendulum impact resiliency tester with energy 0.5J and applied to measure the resilience value of vulcanized rubber with hardness 30—85IRHD. It measures up to ISO4662, ASTM-D 1054-66,DIN 53512. Rubber Impact Resilience Tester is the pendulum impact resiliency tester to measure the resilience value of vulcanized rubber.
  Contact Now
SKZ134 Rubber PlastometerUsed to test plastic value and restoration value of raw rubber, plastic rubber and rubber. It takes high accurate temperature control and time instrument with digital setting, temperature and time display.Standard:GB/T12828 and ISO7323-1985.SpecificationSpecimen suffered pressure49N±0.05NTemperature control70℃±1℃ (optionally set in the range of 100℃)Time range 3minIndicating range0-30 (mm)Indicating accuracy0.01mmPower 220V, 50HZ, 700WDimension 360×280×570 (mm)Net weight35kg
  Contact Now
SKZ137B Rubber Fatigue Testing Machine-Speed adjustableRubber fatigue (flexible) cracking tester is used to test the performance of vulcanized rubber and rubber shoes after repeated flexible cracking.Standard: ISO132, ISO133. Feature 1. The host and controller have digital Settings, LED display elastic time and automatic standing.2. Fix the sample separately in the clamp.
  Contact Now
SKZ131 ASTM D5289 ISO6502 Rotor-less Curemeter Rubber Vulcanizing Tester-Cure MeterFor measuring the unvulcanized rubber traits to discover the best therapy time.Standard:ASTM D5289, ISO6502, T30,T60,T90.Technical parameters:Temperature rangeroom temperature ~ 300 ℃Warming time≤ 15minTemperature Resolution0 to 200 °C: 0.1 °C0 to 300 °C: 1 °C.Temperature fluctuation≤ ± 0.5 °C (after feeding)Torque range0N.m ~ 10N.mTorque display resolution0.001N.mMaximum test time120min (modify time during testing)Swing angle± 0.5 ° (total amplitude of 1 °)Body swing
  Contact Now
SKZ139 Rubber compression Deformation TesterContain by parallel steel plates, limiters and fasteners, used for vulcanized rubber, thermoplastic rubber in room temperature, high temperature and low temperature conditions, at a constant compression rate, after a certain compression time determination of the amount of deformation of rubber. Standard: ASTM-D395,ISO815.Technical parameters:Sample A: dia. 29mm, height: 12.5mmB: dia. 13mm, height: 6.3mmLimiters heightcompression rate 25%A: 9.3 ~ 9.4 B: 4.7 ~ 4.8Compression rate 15%A: 1
  Contact Now
SKZ131 Rubber vulcanizing Tester--Rotor-less curemeterFor measuring the unvulcanized rubber characteristics to identify the optimum cure time.Feature Imported intelligent digital temperature controller, easy adjust settings, a wide range of temperature control, high control accuracy, stabilityStandard:ASTM D5289, ISO6502, T30,T60,T90.Technical parameters:Temperature rangeroom temperature ~ 300 ℃Warming time≤ 15minTemperature Resolution0 to 200 °C: 0.1 °C0 to 300 °C: 1 °C.Temperature fluctuation≤ ± 0.5 °C (after feeding)Torque range0N.m ~ 10N.mTorque display resolution0.001N.mMaximum test
  Contact Now
Rubber Industry Carbon Black Content Tester SKZ1059B Product descriptionThe SKZ1059B Carbon Black Content Tester is a specialized instrument used for determining the amount of carbon black present in a sample. It's commonly used in the rubber industry to measure the quality and consistency of carbon black in rubber compounds. This tester operates by gravimetric analysis, where the sample is burned in a controlled environment to separate the carbon black from other components.
  Contact Now
-80℃~0℃ ISO812 ISO974—80 SKZ133 low temperature Rubber Brittleness EquipmentApplied for non-rigid plastic and other flexible materials at low temperatures and also test the brittleness temperature and low temperature performance for different rubber material or different formula vulcanized rubber. Standard: GB1682-82, ISO812:1991, ISO974—80.Technical parameters:Testing temperature-80℃~0℃Impact speed2 m/s±0.2 m/sImpactor weight200 ± 20gWorking stroke 40 ± 1mmTemperature fluctuation<±0.5℃Distance between impactor and clamp11±0.5 (mm)Distance between i
  Contact Now
ASTM-D 1054-66 Rubber Impact Resilience TesterTechnical parameters:Diameter of impactorФ15mmSpecimen specificationФ29mm×12.5mmImpact weight0.35-0.1kgImpact speed1.4+0.6m/sStrain energy density351+112kJ/m³Resilience value error±0.5%Dimension320mm×200mm×360mmWeight20kgSKZ136IMPACT RESILIENCE TESTEREXCELLENT PERFORMANCE,SUPERB TECHNOLOGYMOQ 1 pCFactory direct saleStandard:1S04662,ASTM-D 1054-66,DIN 535125KPRODUCT DISPLAYNDUSTERubber lmpact Resilience TesterThe instrument is the pendulumimpact resiliency tester to measure the resilience value of vulcanized rubbelSuitable for metallurgy, constructi
  Contact Now
Rubber Vulcanizer SKZ401Rubber Vulcanizer is mainly used for rubber vulcanization, thermosetting plastics and insulation products of pression, This test machine has device of pressure, time, temperature automatic control device, can be realized clamping, regular work cycle, and can automatically pressure compensatingFeatures1.Mainly consists of three parts: the host, hydraulic systems, electrical control system2.It has device of pressure, time, automatic temperature control device, can be clamping, the timing of the work cycle, and can automatically pressure compensatingSpecification 
  Contact Now
SKZ136  Rubber Impact Resilience Tester DIN 53512 MeterTechnical parameters:Diameter of impactorФ15mmSpecimen specificationФ29mm×12.5mmImpact weight0.35-0.1kgImpact speed1.4+0.6m/sStrain energy density351+112kJ/m³Resilience value error±0.5%Dimension320mm×200mm×360mmWeight20kgSKZ136IMPACT RESILIENCE TESTEREXCELLENT PERFORMANCE,SUPERB TECHNOLOGYMOQ 1 pCFactory direct saleStandard:1S04662,ASTM-D 1054-66,DIN 535125KPRODUCT DISPLAYNDUSTERubber lmpact Resilience TesterThe instrument is the pendulumimpact resiliency tester to measure the resilience cost of vulcanized rubbelSuitable for
  Contact Now
SKZ133 Rubber Brittleness TesterUsed to test the highest temperature called brittleness temperature when the specimen is broken by impact in prescribed conditions.
  Contact Now
SKZ132 GB/T 1232 GB/T 1233 Raw rubber or rubber Mooney ViscometerUsed to Raw rubber or rubber compound for the determination of Viscosity, scorch and curing indexStandardsASTM D1646,ISO 289,JIS K6300,GB/T 1232,GB/T 1233Feature of Control Software: 1. Unit of options: kgf-cm, lbf-in Nm, the dN-m, the MV;2. Test data: contains the Mooney viscosity, scorch various data;3. Test curve: Mooney viscosity curve, Mooney scorch curve, temperature curve of the upper and lower mold4. Modify the time during testing5. The test data can be saved automatically6.
  Contact Now
For measuring the unvulcanized rubber characteristics to identify the optimum cure time.Feature Imported intelligent digital temperature controller, easy adjust settings, a wide range of temperature control, high control accuracy, stabilityStandard:ASTM D5289, ISO6502, T30,T60,T90.Technical parameters:Temperature rangeroom temperature ~ 300 ℃Warming time≤ 15minTemperature Resolution0 to 200 °C: 0.1 °C0 to 300 °C: 1 °C.Temperature fluctuation≤ ± 0.5 °C (after feeding)Torque range0N.m ~ 10N.mTorque display resolution0.001N.mMaximum test time120min (modify time during testing)Swing angle± 0.5 ° (
  Contact Now
ISO 132 133 rubber fatigue (Flex) cracking machineFeatureThe host and controller feature digital settings, LED displays for flexible timing, and automatic stand functionality.Secure the specimen individually in the clamp.
  Contact Now
The rubber fatigue (Flex) cracking machine is used to test the cracking performance of vulcanized rubber and rubber shoes by repeated flex.Standard: ISO132, ISO133.Feature 1.Host and controller with digital setting, LED display flex times and automatic stands. 2.Separately fix the specimen in the clamp. It is the newest improved testing machine.Technical parameters:Frequency of down clamp300r/minAdjustable max distance between upper and down clamp200mmAdjustable max distance of eccentric wheel50mmMax trip of down clamp100mmDimension1000*500*1200 (mm)Net weight200kg 
  Contact Now
This equipment is designed for testing the plasticity and resilience of raw rubber, plastic rubber, and rubber. It requires precise temperature control and a digital instrument for setting and displaying temperature and time.Standard:GB/T12828 and ISO7323-1985.Technical parameters:Specimen suffered pressure49N±0.05NTemperature control70℃±1℃ (optionally set in the range of 100℃)Time range 3minIndicating range0-30 (mm)Indicating accuracy0.01mmPower 220V, 50HZ, 700WDimension 360×280×570 (mm)Net weight35kg
  Contact Now
Used to Raw rubber or rubber compound for the determination of Viscosity, scorch and curing index StandardsASTM D1646,ISO 289,JIS K6300,GB/T 1232,GB/T 1233 Feature of host 1. Computer control, Data display, Automatic calibration2. Imported digital temperature controller, easy to adjust settings, wide temperature range3. Using the latest principles of a "host + computer + printer" structureFeature of Control Software: 1. Unit of options: kgf-cm, lbf-in Nm, the dN-m, the MV;2. Test data: contains the Mooney viscosity, scorch various data;3.
  Contact Now
Relate News
Carbon black content tester is an instrument used to measure carbon black content in materials.The basic principle of the carbon black content tester is to quantitatively analyze the carbon black in the material by burning the carbon black in the sample in the oxygen environment.Method of applicationTo use the carbon black content tester, follow the following steps:Prepare the sample: Put 1g sample to be tested and put it into the combustion boat according to the test.Preheating: Turn on the tester, pass nitrogen for a few minutes, and set the temperature program.Place the sample: Place the pr
SKZ108A/B Mullen Bursting Tester is a basic instrument for testing the strength of paper and paperboard.
SKZ401 Rubber Vulcanizer is mainly used for vulcanizing flat type tape (such as conveyor belt, transmission belt, referred to as flat belt), belongs to hydraulic machinery, the main function of plate vulcanizing machine is to provide the pressure and temperature required for vulcanization. The pressure is generated by the hydraulic system through the hydraulic cylinder, and the temperature is provided by the heating medium (usually steam, thermal oil, etc., and superhot water is also useful).
Our company is specialized in manufacturing and supply Lab equipment: Scientific instrument, Analytical Instrument, Thermal Analysis, Moisture meter, Gas detector and testing instruments for pulps, paper, cardboards, plastic, rubber and textile. Our moisture meters and gas detectors obtained CE certification and professional test report in August 2021. We have original trademarks on July 19,2018 and intellectual property certificates on Decmeber 12,2018.
I'm sure the term Martindale wear test is not a new term for anyone in the textile field.The Martindale wear test means that textiles are tested according to the Martindale standard system, through which the wear resistance of the fabric is tested. Wear resistance refers to the resistance of the fabric to other materials during repeated friction with other materials.
Compared to the company, SKZ is more like a warm big family.SKZ cares about the physical and mental health of every employee and hopes that employees have sufficient time to rest or accompany their families, so we never force overtime. Compared to other companies, SKZ has a more pleasant working atmosphere and more employee benefits.
SKZ1050D gas analyzer is a data collector used in mine, tunnel engineering site, universities, scientific research laboratories, environmental monitoring, flue gas emissions, etc., which can quickly collect and analyze gas concentration components. The SKZ1050D gas analyzer can detect up to 18 gases simultaneously. It can integrate electrochemical, catalytic, thermal conductivity, infrared, photoion, ultraviolet and other detection principles, focusing on the accuracy of gas detection and user experience.Product characteristics1.
Dumplings are full, life is warm, dumplings are sweet and tender. Happy Dragon Boat Festival to my dearest relatives!
SKZ1052 high-precision differential scanning calorimeter is an instrument launched by SKZ for conducting material thermal analysis experiments. It can be used to test oxidation induction period, glass transition temperature, melting point, melting, enthalpy change, phase change, cold crystallization, crystallization, product stability, curing degree, cross-linking degree, specific heat capacity, reaction heat, etc. The instrument uses imported sensors with high sensitivity. Signal acquisition circuit shielding protection, strong anti-interference, and high baseline stability.
SKZ111B-4 Microcomputer rice polisher can complete the whole process of rice husking and brown rice grinding through automatic one time, which can quickly and truly judge the quality of rice. SKZ111B-4 Microcomputer rice polisher has the advantages of simple operation, good white effect, short working time, strong and wear-resistant head, beautiful appearance and so on.