SKZ139 Rubber compression Deformation TesterContain by parallel steel plates, limiters and fasteners, used for vulcanized rubber, thermoplastic rubber in room temperature, high temperature and low temperature conditions, at a constant compression rate, after a certain compression time determination of the amount of deformation of rubber. Standard: ASTM-D395,ISO815.Technical parameters:Sample A: dia. 29mm, height: 12.5mmB: dia. 13mm, height: 6.3mmLimiters heightcompression rate 25%A: 9.3 ~ 9.4 B: 4.7 ~ 4.8Compression rate 15%A: 1
Contact Now
High Quality Box Compression Tester SKZ121Box Compression Tester is applicable in testing the compression endurance and stacking strength and press standard of corrugated carton. Test items:●Compressive test: to determine the maximum compression strength●Stacking test: to determine the stacking strength test,12 hours, 24 hours●Pressure standards test: testing whether the box reaches the preset compression or deformation of the requirements Standards:ISO2234, ISO2233, ISO2206, ISO12048. ISO2874, ISO2872.
Contact Now
SKZ134 Rubber PlastometerUsed to test plastic value and restoration value of raw rubber, plastic rubber and rubber. It takes high accurate temperature control and time instrument with digital setting, temperature and time display.Standard:GB/T12828 and ISO7323-1985.SpecificationSpecimen suffered pressure49N±0.05NTemperature control70℃±1℃ (optionally set in the range of 100℃)Time range 3minIndicating range0-30 (mm)Indicating accuracy0.01mmPower 220V, 50HZ, 700WDimension 360×280×570 (mm)Net weight35kg
Contact Now
SKZ128 Digital Rubber Hardness Tester Shore Hardness MeterShore hardness tester is applied to test the hardness of vulcanized rubber and plastic. The hardness head is installed on the stand. You can also take the head from the stand to carry spot testing.
Contact Now
SKZ131 ASTM D5289 ISO6502 Rotor-less Curemeter Rubber Vulcanizing Tester-Cure MeterFor measuring the unvulcanized rubber traits to discover the best therapy time.Standard:ASTM D5289, ISO6502, T30,T60,T90.Technical parameters:Temperature rangeroom temperature ~ 300 ℃Warming time≤ 15minTemperature Resolution0 to 200 °C: 0.1 °C0 to 300 °C: 1 °C.Temperature fluctuation≤ ± 0.5 °C (after feeding)Torque range0N.m ~ 10N.mTorque display resolution0.001N.mMaximum test time120min (modify time during testing)Swing angle± 0.5 ° (total amplitude of 1 °)Body swing
Contact Now
SKZ137B Rubber Fatigue Testing Machine-Speed adjustableRubber fatigue (flexible) cracking tester is used to test the performance of vulcanized rubber and rubber shoes after repeated flexible cracking.Standard: ISO132, ISO133. Feature 1. The host and controller have digital Settings, LED display elastic time and automatic standing.2. Fix the sample separately in the clamp.
Contact Now
SKZ136 Rubber Impact Resilience TesterRubber Impact Resilience Tester is the pendulum impact resiliency tester with energy 0.5J and applied to measure the resilience value of vulcanized rubber with hardness 30—85IRHD. It measures up to ISO4662, ASTM-D 1054-66,DIN 53512. Rubber Impact Resilience Tester is the pendulum impact resiliency tester to measure the resilience value of vulcanized rubber.
Contact Now
Leak Tester is a kind of tester that use compression air to produce negative pressure by vacuum device to test the seal capability and processing technique of soft plastic packaging material in food and pharmaceutical industry. It also can test the specimen which has done the drop and compression test. Standards GB/T15171-94 (the Seal Testing Method for soft packaging).
Contact Now
SKZ131 Rubber vulcanizing Tester--Rotor-less curemeterFor measuring the unvulcanized rubber characteristics to identify the optimum cure time.Feature Imported intelligent digital temperature controller, easy adjust settings, a wide range of temperature control, high control accuracy, stabilityStandard:ASTM D5289, ISO6502, T30,T60,T90.Technical parameters:Temperature rangeroom temperature ~ 300 ℃Warming time≤ 15minTemperature Resolution0 to 200 °C: 0.1 °C0 to 300 °C: 1 °C.Temperature fluctuation≤ ± 0.5 °C (after feeding)Torque range0N.m ~ 10N.mTorque display resolution0.001N.mMaximum test
Contact Now
SKZ133 Rubber Brittleness TesterUsed to test the highest temperature called brittleness temperature when the specimen is broken by impact in prescribed conditions.
Contact Now
-80℃~0℃ ISO812 ISO974—80 SKZ133 low temperature Rubber Brittleness EquipmentApplied for non-rigid plastic and other flexible materials at low temperatures and also test the brittleness temperature and low temperature performance for different rubber material or different formula vulcanized rubber. Standard: GB1682-82, ISO812:1991, ISO974—80.Technical parameters:Testing temperature-80℃~0℃Impact speed2 m/s±0.2 m/sImpactor weight200 ± 20gWorking stroke 40 ± 1mmTemperature fluctuation＜±0.5℃Distance between impactor and clamp11±0.5 (mm)Distance between i
Contact Now
Rubber Industry Carbon Black Content Tester SKZ1059B Product descriptionThe SKZ1059B Carbon Black Content Tester is a specialized instrument used for determining the amount of carbon black present in a sample. It's commonly used in the rubber industry to measure the quality and consistency of carbon black in rubber compounds. This tester operates by gravimetric analysis, where the sample is burned in a controlled environment to separate the carbon black from other components.
Contact Now
Ozone aging test chamber is one of the climate simulation test equipment for testing vulcanized rubber in the static and dynamic tensile deformation state, exposure to air containing a certain concentration of ozone and a certain temperature environment, but no direct sunlight under the harsh Adaptability test conditions for a variety of research institutes and factories and mines laboratory test samples for the aging test.
Contact Now
Rubber Vulcanizer SKZ401Rubber Vulcanizer is mainly used for rubber vulcanization, thermosetting plastics and insulation products of pression, This test machine has device of pressure, time, temperature automatic control device, can be realized clamping, regular work cycle, and can automatically pressure compensatingFeatures1.Mainly consists of three parts: the host, hydraulic systems, electrical control system2.It has device of pressure, time, automatic temperature control device, can be clamping, the timing of the work cycle, and can automatically pressure compensatingSpecification
Contact Now
SKZ136 Rubber Impact Resilience Tester DIN 53512 MeterTechnical parameters:Diameter of impactorФ15mmSpecimen specificationФ29mm×12.5mmImpact weight0.35-0.1kgImpact speed1.4+0.6m/sStrain energy density351+112kJ/m³Resilience value error±0.5%Dimension320mm×200mm×360mmWeight20kgSKZ136IMPACT RESILIENCE TESTEREXCELLENT PERFORMANCE,SUPERB TECHNOLOGYMOQ 1 pCFactory direct saleStandard:1S04662,ASTM-D 1054-66,DIN 535125KPRODUCT DISPLAYNDUSTERubber lmpact Resilience TesterThe instrument is the pendulumimpact resiliency tester to measure the resilience cost of vulcanized rubbelSuitable for
Contact Now
ASTM-D 1054-66 Rubber Impact Resilience TesterTechnical parameters:Diameter of impactorФ15mmSpecimen specificationФ29mm×12.5mmImpact weight0.35-0.1kgImpact speed1.4+0.6m/sStrain energy density351+112kJ/m³Resilience value error±0.5%Dimension320mm×200mm×360mmWeight20kgSKZ136IMPACT RESILIENCE TESTEREXCELLENT PERFORMANCE,SUPERB TECHNOLOGYMOQ 1 pCFactory direct saleStandard:1S04662,ASTM-D 1054-66,DIN 535125KPRODUCT DISPLAYNDUSTERubber lmpact Resilience TesterThe instrument is the pendulumimpact resiliency tester to measure the resilience value of vulcanized rubbelSuitable for metallurgy, constructi
Contact Now
SKZ132 GB/T 1232 GB/T 1233 Raw rubber or rubber Mooney ViscometerUsed to Raw rubber or rubber compound for the determination of Viscosity, scorch and curing indexStandardsASTM D1646,ISO 289,JIS K6300,GB/T 1232,GB/T 1233Feature of Control Software: 1. Unit of options: kgf-cm, lbf-in Nm, the dN-m, the MV;2. Test data: contains the Mooney viscosity, scorch various data;3. Test curve: Mooney viscosity curve, Mooney scorch curve, temperature curve of the upper and lower mold4. Modify the time during testing5. The test data can be saved automatically6.
Contact Now
SKZ1027A/B/C/D Laboratory Valley Pulp BeaterLaboratory Valley pulp Beater, mechanical forces generated by the roll and the bottom knife, the fiber pulp was cutting, crushing, kneading, split, moistening and fiber thinning, meanwhile, the fiber cell wall displacement and deformation generated, the primary wall and outer wall broken.
Contact Now
For measuring the unvulcanized rubber characteristics to identify the optimum cure time.Feature Imported intelligent digital temperature controller, easy adjust settings, a wide range of temperature control, high control accuracy, stabilityStandard:ASTM D5289, ISO6502, T30,T60,T90.Technical parameters:Temperature rangeroom temperature ~ 300 ℃Warming time≤ 15minTemperature Resolution0 to 200 °C: 0.1 °C0 to 300 °C: 1 °C.Temperature fluctuation≤ ± 0.5 °C (after feeding)Torque range0N.m ~ 10N.mTorque display resolution0.001N.mMaximum test time120min (modify time during testing)Swing angle± 0.5 ° (
Contact Now
The rubber fatigue (Flex) cracking machine is used to test the cracking performance of vulcanized rubber and rubber shoes by repeated flex.Standard: ISO132, ISO133.Feature 1.Host and controller with digital setting, LED display flex times and automatic stands. 2.Separately fix the specimen in the clamp. It is the newest improved testing machine.Technical parameters:Frequency of down clamp300r/minAdjustable max distance between upper and down clamp200mmAdjustable max distance of eccentric wheel50mmMax trip of down clamp100mmDimension1000*500*1200 (mm)Net weight200kg
Contact Now
This equipment is designed for testing the plasticity and resilience of raw rubber, plastic rubber, and rubber. It requires precise temperature control and a digital instrument for setting and displaying temperature and time.Standard:GB/T12828 and ISO7323-1985.Technical parameters:Specimen suffered pressure49N±0.05NTemperature control70℃±1℃ (optionally set in the range of 100℃)Time range 3minIndicating range0-30 (mm)Indicating accuracy0.01mmPower 220V, 50HZ, 700WDimension 360×280×570 (mm)Net weight35kg
Contact Now
SKZ129B DIN Abrasion TesterFor determination of abrasion resistance of rubber tires, rubber overshoes, adhesive tape, to identify the quality of rubber products. Rubber compounds were friction with the cloth in a certain load to determine the amount of abrasion of the sample within a predetermined stroke.Standard ISO4649, DIN 53516Technical parameters:Sample load2.5N, 5N,10NStroke40m or 20mRoller speed40 ± 1r/minRoller diameterФ150 ± 0.2mmRoller length460mmSample dia.Ф16 ± 0.2mmPowerAC220V ± 10% 50HzDimension700mm × 340mm × 300mmWeight63kg
Contact Now
ISO 132 133 rubber fatigue (Flex) cracking machineFeatureThe host and controller feature digital settings, LED displays for flexible timing, and automatic stand functionality.Secure the specimen individually in the clamp.
Contact Now
SKZ129A Auto Akron Abrasion TesterStandardISO:4661-1:1993, ISO 2481:1988, ISO 471:1983, ISO 1826:1981Technical parameters:Tire suffered force26.7N (2.7kgf)Tire axis rotary speed76±2r/minWheel axis speed33-35r/minAngle between the two axis0°~45°PowerAC220V±10%Dimension600×480×400 (mm)Weight60kgProducts DescriptionSKZ129AAkron Abrasion TesterIS0:4661-1:1993I50 2481:1988IS0 471:1983I50 1826:1981The Angle between therubber wheel shaft and thegrinding wheel can beadjusted to 15°or 25°Stable base, strong structure.durable and now not handy to breakHigh exceptional
Contact Now
