The sample cutter for Cobb absorbency testing.Technical parameters:Specimen thickness0.1-1.0(mm)Error±0.2mmSpecimen diameter125mmDimension 240×288×435(mm)Weight28Kg
Contact Now
Edge Crush Sample CutterCorrugated fiberboard Edge Crush Test/adhesive sample cutterSample size25mm×100mm (ECT), 25mm×80mm (adhesive)Result error±0.5mmMaximum length220mmMaximum thickness18mmDimension430mm×380mm×200mmWeight 22kg
Contact Now
Ring crush Sample CutterSample cutter for RCT, Sample length: 152 mm, Sample width: 12.7 mmSample length152 mmSample width12.7 mmTwo length sides parallelism＜0.015mmSample thickness(0.1～1.0)mmDimension 570×190×368(mm)Weight 20KG
Contact Now
SKZ112-3 Corrugated fiberboard Flat Crush Test sample cutterSample area64.5cm2 , 32.2cm2Result error±0.5cm2Sample thickness≤7mmWeight 2.5kg
Contact Now
Crush Tester is used to do the Ring Crush test, Edge Crush Test, Flat Press Test, Adhesive Strength Test, and Paper Tube Compress Test.We also have the accessories for its each test. Standards:ISO 3070, ISO 12192-2011, ISO 7263-2011, ISO 3035-2011 Feature：1. Microprocessor control, automatically carry the test according to testing requests. 2. Protect press sensor through the protection switch for over- loading. 3. Analyzing the group of testing data and to show the maximum, minimum, average, 4.
Contact Now
The Auto-pneumatic Cutter Press is driven by air pressure only. lt is suitable for laboratory to punch every kind of standard specimens from rubber, plastic, leather Standard: ASTM-D412Technical parameters:TypesPNEUMATICMoving distance25mm～100mmWorking platform320 mm×220 mmSpecimen thicknessmaximum 10mmAir pressure0.6MPaDimension380mm×260mm×590mmNet weight40kg
Contact Now
Designed according to GB/T1540-1989, ISO535 (Cobb paper and cardboard absorbency method), which is used to test the absorbency of paper and cardboard, but not applied to evaluate the writing capability of paper and cardboard.Technical parameters:Metal cylinder inside area100±0.2cm², height: 50mmAbsorbency paper200~250g/m²Absorbency speed75mm/10minSmooth metal rollerwidth:200±0.5mm, weight:10±0.5kgDimension390×280×410 (mm)Weight 25kgOptional Balance: accuracy 0.001g, measure range 500gStopwatch: 1sGlass graduate: 100ml Cobb sample cutter
Contact Now
SKZ1013 Automatic TensiometerThe automatic surface tensiometer consists of a highly precise and stable force measurement system, a microcomputer control system, and a platinum plate (ring) measurement device. It is designed to be compact, with a simple and reliable structure, and easy to operate either in automatic or manual mode. This device offers various features such as net weight measurement throughout the entire range with a one-key minimum clearing function, automatic calibration for the entire range, excellent repeatability, and accurate and reliable test results.
Contact Now
Laboratory Paper GSM Tester SKZ114CIt is the sample cutter for the test of all kinds of paper grammage and slice .The cutter conforms to the standard of QB/T1671—98. Technical parameters:Area100Cm2Specimen diameterΦ112.8±0.05mmSpecimen thicknesspaper: 0.1-1.0 (mm), cardboard: single wall <0.6mmDimension 270×260×405 (mm)Weight 15kg Structure and operationStructure: base, rack, gear, rack, upper edge and lower edge, specimen baffles, received board and operating handle.
Contact Now
SKZ1013 Automatic surface tension MeterProgrammed surface tensiometer, comprised of high exact and stable power estimation framework, microcomputer control framework, platinum plate (ring) estimation gadget, is conservative in plan, basic and dependable in structure, simple in activity (programmed/manual).
Contact Now
SKZ1013 Surface Tension MeasurementThe small design of the automatic surface tensiometer, which consists of a microcomputer control system, a platinum plate (ring) measurement device, and a highly precise and stable force measurement system, makes it easy to operate both manually and automatically.
Contact Now
SKZ159 Color Fastness To Rubbing TestApply:To ascertain the rubbing color fastness of leather, knitted materials, textiles, and electro-chemical printing metal plates.Standard:GB/T3920, ISO105-X12, GB/T5712, ISO105-D02Mode of testing:Using a wet and dry rubbing cloth, gently scrub the sample, and then use the gray sample card to determine how stained and discolored it is.Feature1. Motor-driven, effective, and energy-efficient.2. Its crank and other important parts are made of stainless steel.3. Comes with a rectangular rubbing head for velvet fabric that measures 19 x 25.4 mm.
Contact Now
High Quality Concora Medium Fluter (CCT, CMT) SKZ113To determinate of flat crush strength of corrugated paper when pressed standard waveform (i.e., from the flute corrugated base paper), comply with standard: ISO7263-1985: corrugating medium – Determination of flat crush resistance after laboratory fluting.Feature: 1.Using single-chip microprocessor control technology, Precision temperature controller
Contact Now
SKZ1013 Automatic Interfacial Tensiometer PriceAutomatic floor tensiometer, made up of excessive specific and secure pressure dimension system, microcomputer manage system, platinum plate (ring) size device, is compact in design, easy and dependable in structure, handy in operation (automatic/manual). It elements internet weight in complete vary (one-key minimal clearing), total vary automated calibration, right repeatability, correct and dependable take a look at end result as nicely as liquid crystal show of check statistics with RS232C output interface.Features:1.
Contact Now
Salt spray corrosion test chamber is one of the three test facilities for artificial climate, such as Wet- heat, salt spray and mould.
Contact Now
Used to test product packaging for damage and evaluate impact resistance and the transport handling process; mostly used to ensure that product packaging can withstand the circumstances of transport capacity and hence enhance and optimize packaging design.Standard:ISO2248, JISZ0202-87Qualities:With a digital height indicator and height tracking decoder, a single wing drop tester may perform a free drop test of the package's surface, angle, and edge.
Contact Now
Ozone aging test chamber is one of the climate simulation test equipment for testing vulcanized rubber in the static and dynamic tensile deformation state, exposure to air containing a certain concentration of ozone and a certain temperature environment, but no direct sunlight under the harsh Adaptability test conditions for a variety of research institutes and factories and mines laboratory test samples for the aging test.
Contact Now
SKZ1044B Flame Photometer Digital Flame Photometer Flame photometer is a relative measurement of the instrument, the concentration value of the sample under test conditions in the same relative value of the concentration of the standard solution. So before the test, you must first prepare a set of corresponding standard solution.
Contact Now
Standard: ISO1133 Feature:1. LCD display, time, temperature and sample times can be set.2. Built-in printer 3. Automatic cutting4. MFR test item Technical parameters:Test methodMFR (unit: g / 10min)Temperature rangeroom temperature ~ 300 ℃Temperature accuracy± 0.5 ℃Temperature Resolution0.1 ℃Measuring range0.1 ~ 300g / 10min (MFR)load3.187 ~ 211.82N is divided into eightBarrel diameterф9.55mm ± 0.025mmDie apertureΦ2.095 ± 0.005mmPowerAC220V±10% 50Hz 1kWDimension300mm×400mm×500mmWeight 35kg
Contact Now
Automatic Surface Tension Meter SKZ1013Automatic surface tensiometer, made up of high precise and stable force measurement system, microcomputer control system, platinum plate (ring) measurement device, is compact in design, simple and reliable in structure, easy in operation (automatic/manual). It features net weight in whole range (one-key minimum clearing), whole range automatic calibration, good repeatability, accurate and reliable test result as well as liquid crystal display of test data with RS232C output interface. Features: 1.
Contact Now
This Laboratory Digester used in caustic cooking and acid cooking, It can also be used to cooking and oxygen bleaching for other liquid work pressure is not more than 8Kg / cm2 Structural Features：1.The device is mainly composed of a machine frame, steamer, reducer, heating laps,rolling bearing, no carbon brush and slip ring, and a safety valve, temperature control instrument, a pressure gauge, a needle valve.2.This device part uses the high quality stainless steel , with high corrosion resistance.3.The heating part of the electric heating ring is composed of six pieces, direct
Contact Now
Digital Flame Photometer SKZ1044AFlame photometer is a relative measurement of the instrument, the concentration value of the sample under test conditions in the same relative value of the concentration of the standard solution. So before the test, you must first prepare a set of corresponding standard solution.
Contact Now
Coating Test machineLaboratory small coating test machine, By controlling the speed and pressure to ensure a stable coating effect, to ensure uniformity and coating stability. It can works for coating test of paper, plastic, metal, PVC, PET, fabric, aluminum plate, etc.
Contact Now
SKZ156B Elmendorf Tear TesterUsed to test the degree and burst force of leather, non-woven textiles, and materials while they are simultaneously under force in all directions (elastic diaphragm method).Standards: ISO2960, ISO13938.1-04, ASTMD3786, JIS1018Features: 1. Meeting the 50cm2 testing area requirements2. Support system for sample clamps3. Facilitating online correspondence Product ParametersTesting range0-2 Mpa (B type)The min. value0.002MpaTest area50cm2(Φ79.8mm), (B type)Elastic mold-plate size≤2mmThe max. burst length70±0.02mmThe max.
Contact Now
