The sample cutter for Cobb absorbency testing.Technical parameters:Specimen thickness0.1-1.0(mm)Error±0.2mmSpecimen diameter125mmDimension 240×288×435(mm)Weight28Kg
Contact Now
Ring crush Sample CutterSample cutter for RCT, Sample length: 152 mm, Sample width: 12.7 mmSample length152 mmSample width12.7 mmTwo length sides parallelism＜0.015mmSample thickness(0.1～1.0)mmDimension 570×190×368(mm)Weight 20KG
Contact Now
The Auto-pneumatic Cutter Press is driven by air pressure only. lt is suitable for laboratory to punch every kind of standard specimens from rubber, plastic, leather Standard: ASTM-D412Technical parameters:TypesPNEUMATICMoving distance25mm～100mmWorking platform320 mm×220 mmSpecimen thicknessmaximum 10mmAir pressure0.6MPaDimension380mm×260mm×590mmNet weight40kg
Contact Now
Edge Crush Sample CutterCorrugated fiberboard Edge Crush Test/adhesive sample cutterSample size25mm×100mm (ECT), 25mm×80mm (adhesive)Result error±0.5mmMaximum length220mmMaximum thickness18mmDimension430mm×380mm×200mmWeight 22kg
Contact Now
Laboratory Paper GSM Tester SKZ114CIt is the sample cutter for the test of all kinds of paper grammage and slice .The cutter conforms to the standard of QB/T1671—98. Technical parameters:Area100Cm2Specimen diameterΦ112.8±0.05mmSpecimen thicknesspaper: 0.1-1.0 (mm), cardboard: single wall <0.6mmDimension 270×260×405 (mm)Weight 15kg Structure and operationStructure: base, rack, gear, rack, upper edge and lower edge, specimen baffles, received board and operating handle.
Contact Now
SKZ112-3 Corrugated fiberboard Flat Crush Test sample cutterSample area64.5cm2 , 32.2cm2Result error±0.5cm2Sample thickness≤7mmWeight 2.5kg
Contact Now
Designed according to GB/T1540-1989, ISO535 (Cobb paper and cardboard absorbency method), which is used to test the absorbency of paper and cardboard, but not applied to evaluate the writing capability of paper and cardboard.Technical parameters:Metal cylinder inside area100±0.2cm², height: 50mmAbsorbency paper200~250g/m²Absorbency speed75mm/10minSmooth metal rollerwidth:200±0.5mm, weight:10±0.5kgDimension390×280×410 (mm)Weight 25kgOptional Balance: accuracy 0.001g, measure range 500gStopwatch: 1sGlass graduate: 100ml Cobb sample cutter
Contact Now
Introduction to H2 gas detectorThe SKZ1050-H2 hydrogen gas detector is mainly used in workplaces where hydrogen gas is present or may occur, such as the electronic packaging industry, food processing industry, metallurgical industry, and other fields. With the increasing emphasis on safety production, equipping gas detectors in places where toxic and harmful gases occur is an issue that cannot be ignored.
Contact Now
SKZ1050 Nitrogen N2 Gas MeasurementFunction 1.Environmental monitoring or detecting the presence of GAS in a restricted area and sounding an alarm2.Equipped with a self-check and zero calibration mechanism to ensure exceptionally accurate and dependable fuel monitoring3.One key that can be removed from overuse issues in order to fix the manufacturing unit settingsFeature 1.Using high-precision electrochemical ideas sensor that is imported2.LCD dot matrix display technology, which can display various information such as the type of petrol, the petrol unit, the petrol attention values,
Contact Now
Analytical Electronic Balance SKZ-A 1.Using high-precision electromagnetic force balance sensor, more accurate, faster response, less fault.2.Weighing faster, and speed adjusted3. Weight units can be converted4. With counting function5. With Tared, cleared, accumulated, overloaded, under load display, fault alarm6. Built-in RS-232 interface, with the printer, computer connected ParametersModel SKZ-A1004SKZ-A 1104SKZ-A 1204SKZ-A 2004SKZ-A 2104SKZ-A 2204Max.
Contact Now
SKZ1019 Digital Brix RefractometerCharacteristics: Use the refraction design principleElectronic DisplaySmall enough to tuck into a pocket.Quick and simple: all it takes is a drop of the sample solution on the prism to get readings in about three seconds.Often used to measure liquid foods and beverages, including practically any fruit juice.Sample volume0.3mlResponse time3sUse lifemore than 10,000 timesTemperature measure range0°C-40°C(32°F-104°F)Accuracy of temperature±0.5°C(1°F)Automatic temperature compensation10°C-60°CAutomatic power-offYesBattery power shortage alarmYesPower Supply2×
Contact Now
SKZ1050D Hydrogen Gas DetectorFeature：1. Adopting a modular internal structure and obtaining a structural design patent. 2. It is divided into 3 detection modules, each of which can detect up to 6 gases.
3. It can built-in maximum 18 gas detection.
4.
Contact Now
SKZ1050C NH3 H2S 2 In 1 Ammonia Hydrogen Sulfide Portable Sensor Multi Gas DetectorOperation1. A single key that can be removed from misuse situations to restore the system to its initial configuration.2. There are two configurable sound and light alarm locations.3. A large-capacity lithium polymer rechargeable battery.4.
Contact Now
SKZ165 Martindale Pilling TesterUsed to evaluate how well textiles and membrane materials perform in terms of wearing resistance, abrasion, and appearance change (pilling degree/class).Standards:ASTM D4970,ASTM D4966,ISO12947,JIS L1096,TM112 M&S, FZ/T20020,IWS TM196,ASTM D3886,DIN53863/53865, BS3424/5690,BS EN 388/530,ISO12945-2Test mode:Mode 1: Using a circular specimen made of the same material fabric and friction with a Lissajous graphic motion trajectory, the specimen can reach the necessary speed while assessing sample pilling at a certain pressure.
Contact Now
SKZ120E Plastics Pipes Opacity TesterFor the determination of plastic pipes and fittings opacity measurement (displays the result as a percentage). Adopts Industrial Panel PC control, touch screen operation.
Contact Now
Digital Density Balance For Gold K Value SKZ400To test density of solid, liquid, powder, water-absorbent sample and Gold K value (A) Feature: 1. High-precision sensor, impact resistance, anti-overload, to ensure weighing accuracy and stability.2. Built-in rigorous test and calculation procedures, direct display density, without manual conversion.3. Aluminum shell, to enhance the anti-static balance anti-interference ability.4. High contrast LCD liquid crystal display, clear and intuitive readings.5.
Contact Now
SKZ145 Melt Flow Rate TesterMelt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin must be determined for engineering plastics, which have higher melt temperatures, such as polycarbonate, nylon, and fluorine plastics; and for fit for plastics tests, which have lower melt temperatures, such as polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Product features:1.The control sy
Contact Now
SKZ1052 differential scanning calorimetry dsc analysisPerformance testing, quality control, and polymer research all make extensive use of DSC.The goal is to determine how temperature and heat flow relate to the inner heat transition.DSC research and development encompasses the domains of glass transition temperature,melting point, phase transition, cold crystallization, and ox
Contact Now
High and low temperature test chamber is one of the climate simulation chambers for the assessment of various electronic products, test at high temperature, low temperature environment.Features:1.Unique balance thermostat, high precision, high temperature stability control.2.Temperature controller with high precision, high stability, PID self-tuning, LED visual display, to ensure precise control of equipment. Equipment with over-temperature3.
Contact Now
Used to carry the heat-ageing test for plasticity material, insulation material. Temperature controlled by digital display, PID auto adjustment, can arbitrarily set the working temperature from room temperature to 200℃ or 300℃, automatically keep temperature.
Contact Now
SKZ145A Melt Flow Indexer PlastometerTechnical parameters:Test methodMFR (unit: g / 10min)Temperature rangeroom temperature ~ 300 ℃Temperature accuracy± 0.5 ℃Temperature Resolution0.1 ℃Measuring range0.1 ~ 300g / 10min (MFR)load3.187 ~ 211.82N is divided into eightBarrel diameterф9.55mm ± 0.025mmDie apertureΦ2.095 ± 0.005mmPowerAC220V±10% 50Hz 1kWDimension300mm×400mm×500mmWeight35kg ABOUT USSKZ Industrial Co., Limited and SKZ International Co., Limited are the individuals of SKZ, which are specialised in furnish rubber trying out machine.SKZ&n
Contact Now
FEATURESColor High contrast LCD touchscreen, 4.3 inches.Intelligent operation system provides features including user management, calibration management, electrode management, method management, data management, Log Management and etc. Multi-reading feature allows auto-read, timed-read and continuous-read. Automatic/Manual temperature compensation ensures accurate results.
Contact Now
SKZ117B Gloss TesterFunction: (1) One button to finish measuring a triangle: one action can finish measuring three angles; The three measuring light incidence angle standards specified in ISO 2813 are met by this method.
Contact Now
SKZ2300 4mm 8mm 16mm Portable Spectrophotometer Color Difference Meter 1、Storage●Upon long time no use , cut off external power and remove the battery to avoid damage to the instrument resulting from battery fluid overflow.●Store in a cool, dry environment with a temperature of -20 ° C ~ 50 ° C and a relative humidity of 85% or less.2、Application●Keep the standard whiteboard clean and avoid contamination of the standard whiteboard with stains, dust, etc.●When using the instrument, the ambient temperature is 0 ° C ~ 40 ° C, the relative humidity is 85%, no condensation.●Avoid usi
Contact Now
