Pulp Testers-manufacture,factory,supplier from China

SKZ1027A/B/C/D Laboratory Valley Pulp BeaterLaboratory Valley pulp Beater, mechanical forces generated by the roll and the bottom knife, the fiber pulp was cutting, crushing, kneading, split, moistening and fiber thinning, meanwhile, the fiber cell wall displacement and deformation generated, the primary wall and outer wall broken.

Laboratory Pulp Disintegrator (also known as standard fiber Disintegrator, standard fiber stirrer), Suitable for laboratory wet disintegration of pulp: the disintegration is to separate the interwoven fibers in water after mechanical processing, and meanwhile to maximum remain fiber original structure properties unchanged, in order to ensure the experiment to obtain reliable data, using the original scientific research and production of effective, economy. Standards:ISO5263, JIS-P8220, TAPPI-T205

Laboratory pulp dehydratorThe effect of the centrifugal force of 1400r/min high speed rotation, in the pulp water out and reached a certain degree of dry, in order to ensure the reliable data. With the use of beating degree tester, it can obtain accurate pulp beating degree and humidity. Parameters:Drum SizeΦ126X100mmDrum capacity1.2LSpeed1400r/minTiming range01s ~ 999.9sPulp dryness20-30%PowerSingle-phase capacitor motor-180W-220VDimension570 × 225 × 460mmWeight30KG

Laboratory Pulp AquapulperFunctions:1. Laboratory for virgin pulp or recycled pulp to beating, disintegration and deinking.2. Major laboratory equipment used to process pulp, broke, and waste paper.3. Assessment recycled pulp process, additives and quality 4.

New Schopper-riegler Beating Pulp Tester SKZ115The instrument is applicable in testing all kinds of suspending pulp liquid that less than 100°SR--- Schopper-Riegler.Standards:QB/T1054-98, GB/T3332-1982 and ISO5267/1.Feature: 1. hydraulic pressure structure with stainless steel 2. confirms to Standard ISO 3332-1982 and ISO5267/13.  filters’s material is phosphor bronze, with its working area 100cm2 Technical parameters:Range0-100°SRMinimum scale1°SRTemperature of distilled water20±0.5 ℃Volume of distilled water1000 mlDraining time149±1 sDimension460×250 (mm)Weight 35kg 

Lab-Potcher is used to simulate the production process of rinsing pulp, can accomplish the process of pulp un-bleached washing, bleaching pulp, pulp bleached process.

SKZ1031 Laboratory pulp Dewatering dehydrator Tester MachineThe effect of the centrifugal force of 1400r/min high speed rotation, in the pulp water out and reached a certain degree of dry, in order to ensure the reliable data.

Laboratory Pulp Standard Fiber Disintegrator Wet DisintegrationLaboratory Pulp Disintegrator (also known as standard fiber Disintegrator, standard fiber stirrer), Suitable for laboratory wet disintegration of pulp: the disintegration is to separate the interwoven fibersin water after mechanical processing, and meanwhile to maximum remain fiber original structure properties unchanged, in order to ensure the experiment to obtain reliable data, using the original scientific research and production of effective, economy. Standards:ISO5263, JIS-P8220, TAPPI-T205Te

SR Beating Pulp Tester SKZ115Schopper-Riegler-This instrument is appropriate for checking out a number suspensions with SR much less than 100 ° C.Product Features:1. hydraulic stress shape with stainless steel2. confirms to Standard ISO 3332-1982 and ISO5267/13. filters’s fabric is phosphor bronze, with its working region 100cm2Specifications:Range0-100°SRMinimum scale1°SRTemperature of distilled water20±0.5 ℃Volume of distilled water1000 ml

Fiber Classifier (Bauer Fiber Classifier) is the equipment used for measuring the weight-average fiber length of pulp fiber according to screening method by pulp and paper-making laboratory. Principle:Screening the pulp suspension into the vessel, the vessel is charged with mesh sieve, Container into a ladder type, the pulp suspension flows from one container to another container, in various different sieve to retain the fiber length pulp, retention of pulp fiber length and the sieve mesh size.

Vibrating vacuum suction, so that compliant pulp fibers from open screening leak continues, not meet the requirements of fiber and wood residues left in the screen plate above, and then removed from the slag hole.Screening of impurities was measured in the pulp debris impurities, Use the pulp screen machine can reduce the number of impurities in the pulp suspension, get clean good pulp. Features:1. Adopt international standards, stainless steel tube frame, the main components made of stainless steel and copper.2.

Laboratory PFI Beater For beating test of middle and high concentrations pulps, so that to Analysis of high-grade paper.  Principle:Placed the pulps, which is measured having a predetermined concentration, between the knife roller and the beating cylinder, rotating with different circumferential speeds. In order to achieve the purpose of beating pulp. Features:1. Main components made of stainless steel,2. Pulp pool with a knife roller are regulated speeds, belt drive,3. The counter can be set to the number of revolutions dissociation pulp,4.

Hand Sheet Former SKZ124BAutomatic type hand sheet former, small dimension more precision and easy to operate, especially get rid of the air-pressure of traditional sheet former. Its sheet diameter Φ200, white water cycle, electromagnetism valve drain automatically, mini-type vacuum system. Main Accessory：copper mesh frame, Paper-making roller, copper mesh 60mesh or 80mesh, up and down water circulative system, air bubble smooth pulp sytem.ParameterCanister diameter200mmCanister capacity 8LPower 463WDimension 500mm×600mm×1300mm

SKZ1030 Laboratory Flotation CellFlotation deinking method is based on the principle of mine ore, according to the fiber, filler and ink composition of wettable, flotation cell in the 10 to 150 micron ink particles adsorbed on the air bubbles, floating to the surface to remove the pulp, fiber and filler remained in the pulp.It is mainly composed of a flotation tank, the circulation line, paper pulp pump, air bubble generating device, liquid discharging pipe. Parameters:Outfall up and down range of activities0 --100Flow calculation controlYes Tank capacity28 litersTank sizeΦ380 × 380mmTank

High Accuracy Brightness Color Meter SKZ102B-1Brightness Meter is widely applied in paper and cardboard, pulp, cotton and fabric, plastic, ceramic and porcelain enamel, amylum, construction material, chemical industry, salt making and other testing department that need to test whiteness, yellowness, color and chromatism, as well as transparency, opacity, light scattering coefficient and light absorption coefficient of paper. Function:1. CIE (1982) whiteness (Ganz visual whiteness) W10 and color shift value Tw10.2.

Digital Brightness Color Meter SKZ102BBrightness Meter is widely applied in paper and cardboard, pulp, cotton and fabric, plastic, ceramic and porcelain enamel, amylum, construction material, chemical industry, salt making and other testing department that need to test whiteness, yellowness, color and chromatism, as well as transparency, opacity, light scattering coefficient and light absorption coefficient of paper. Function:1. Test the color and color difference of reflective objects.2.

Electronic Brightness Meter SKZ102ABrightness Meter is widely applied in paper and cardboard, pulp, cotton and fabric, plastic, ceramic and porcelain enamel, amylum, construction material, chemical industry, salt making and other testing department that need to test whiteness.Function:1. Test R457 or ISO Brightness.2. Analysis if it contains fluorescent whitening agent and determination of reflection fluorescence.produced by white fluorescent, that is, degree of whitening.3. Test the brightness value of Y10, Ie, the green light diffuse reflectance factor Ry.4.

Crush Tester is used to do the Ring Crush test, Edge Crush Test, Flat Press Test, Adhesive Strength Test, and Paper Tube Compress Test.We also have the accessories for its each test. Standards:ISO 3070, ISO 12192-2011, ISO 7263-2011, ISO 3035-2011 Feature：1. Microprocessor control, automatically carry the test according to testing requests. 2. Protect press sensor through the protection switch for over- loading. 3. Analyzing the group of testing data and to show the maximum, minimum, average, 4.

SKZ108 Paper Mullen Bursting Strength Testing Meter Tester EquipmentApplicationUsed to determine a variety of paper and not more than 2000kpa monolayer of thin cardboard, or a variety of single and multi-layer cardboard and corrugated cardboard can also be used to detect silk cotton and other non-paper products.PrincipleIt adopts signal transmitting press.

LCD Melt Flow Indexer MRF MVR Meter ISO1133 400degree MFI EquipmentStandards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics —Part 1:Standard methodISO 1133-2:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics —Part 2: Method for materials sensitive to time temperature history and/or moistureGBT 3682.1-2018 "Plastic Thermoplastic Melt Mass Flow Rate (MFR) and Melt Volume Flow Rate (MVR) Determination"ASTM D1238-2013 "Standard Test Method

SKZ145A Melt Flow Indexer MFR instrumentTechnical parameters:Test methodMFR (unit: g / 10min)Temperature rangeroom temperature ~ 300 ℃Temperature accuracy± 0.5 ℃Temperature Resolution0.1 ℃Measuring range0.1 ~ 300g / 10min (MFR)load3.187 ~ 211.82N is divided into eightBarrel diameterф9.55mm ± 0.025mmDie apertureΦ2.095 ± 0.005mmPowerAC220V±10%  50Hz 1kWDimension300mm×400mm×500mmWeight35kg ABOUT USSKZ Industrial Co., Limited and SKZ International Co., Limited are the humans of SKZ, which are specialised in furnish rubber attempting out machine.SKZ installed 

SKZ145 Melt Flow Rate TesterMelt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin must be determined for engineering plastics, which have higher melt temperatures, such as polycarbonate, nylon, and fluorine plastics; and for fit for plastics tests, which have lower melt temperatures, such as polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Product features:1.The control sy

TU4000E Turbidity MeasurementGENERAL FEATURES7” colorful touchscreen.Tungsten lamp light source met USEPA 180.1 requirement.3 photodiodes to ensure high accuracy.1-8 points calibration using Formazin standards or zero water.Autoranging from 0-4000 NTU.Data Storage capacity of 1000 sets (GLP-compliant).

Product DescriptionHigh Quality Textile Washing Fastness Tester SKZ157C Used for testing the color fastness to washing, drying cleaning and color fastness to milling of all textiles, and also for assessing the color fastness to washing of all dye stuffs.Standards: ISO105C01/C02/03/04/05/C06/08, JIS L0860/0844, AATCC61/1A/2A/3A/4A/5A, Bs1006Features:1. 7-inch multi-function colour touch screen.2. Automatic water level control, automatic water, drainage, and set to prevent dry function.3. High-grade stainless steel wire drawing process, beautiful and durable.4.