The Auto-pneumatic Cutter Press is driven by air pressure only. lt is suitable for laboratory to punch every kind of standard specimens from rubber, plastic, leather Standard: ASTM-D412Technical parameters:TypesPNEUMATICMoving distance25mm~100mmWorking platform320 mm×220 mmSpecimen thicknessmaximum 10mmAir pressure0.6MPaDimension380mm×260mm×590mmNet weight40kg
Contact Now
The sample cutter for Cobb absorbency testing.Technical parameters:Specimen thickness0.1-1.0(mm)Error±0.2mmSpecimen diameter125mmDimension 240×288×435(mm)Weight28Kg
Contact Now
Ring crush Sample CutterSample cutter for RCT, Sample length: 152 mm, Sample width: 12.7 mmSample length152 mmSample width12.7 mmTwo length sides parallelism<0.015mmSample thickness(0.1~1.0)mmDimension 570×190×368(mm)Weight 20KG
Contact Now
Edge Crush Sample CutterCorrugated fiberboard Edge Crush Test/adhesive sample cutterSample size25mm×100mm (ECT), 25mm×80mm (adhesive)Result error±0.5mmMaximum length220mmMaximum thickness18mmDimension430mm×380mm×200mmWeight 22kg
Contact Now
Auto Pneumatic Bursting Strength TesterDetermination pressure for a variety of fabrics, including knits, woven fabric, non-woven fabric, laminated fabric and other craft-made variety of fabrics, in standard conditions or under wet bursting strength and bursting dilation. Standards ISO13938-2, ASTM D3786, IWS Tm29Test principleThrough the circular clamping the sample holder can be extended in the diaphragm, the gas pressure applied below the diaphragm, the diaphragm and the sample expansion.
Contact Now
SKZ1017B Five points Heat Seal TesterStructure:Divided into 4 components of the air power system, warmness sealing device, temperature manage system, time-conditioning systems.1. Structure: It contains air drive system, sealing devices, temperature-conditioning systems, time-conditioning systems2. Air-driven system: Including pressure gauges, guide rods, cylinder, pneumatic valve, pressure regulator handles, so on.
Contact Now
Crush Tester is used to do the Ring Crush test, Edge Crush Test, Flat Press Test, Adhesive Strength Test, and Paper Tube Compress Test.We also have the accessories for its each test. Standards:ISO 3070, ISO 12192-2011, ISO 7263-2011, ISO 3035-2011 Feature:1. Microprocessor control, automatically carry the test according to testing requests. 2. Protect press sensor through the protection switch for over- loading. 3. Analyzing the group of testing data and to show the maximum, minimum, average, 4.
Contact Now
Laboratory Paper GSM Tester SKZ114CIt is the sample cutter for the test of all kinds of paper grammage and slice .The cutter conforms to the standard of QB/T1671—98. Technical parameters:Area100Cm2Specimen diameterΦ112.8±0.05mmSpecimen thicknesspaper: 0.1-1.0 (mm), cardboard: single wall <0.6mmDimension 270×260×405 (mm)Weight 15kg Structure and operationStructure: base, rack, gear, rack, upper edge and lower edge, specimen baffles, received board and operating handle.
Contact Now
Feature: 1.Mainly composed by dryers, vacuum pumps, and sheet former (press)2.Sheet former parts: power-driven drain off water, white water cycle use, power-driven feed water, aerodynamic homogenate ( also can manual homogenate), Water molding or vacuum pump suction molding3.Dry parts adopt vacuum heating and drying, vacuum pump adopts water cycle, heating element use heating plate, temperature control system, and has a short circuit, disconnection, and automatic over-temperature alarm function, with a stop anti-oil return.4.Countertops and water tanks are made of stainless steelTech
Contact Now
Designed according to GB/T1540-1989, ISO535 (Cobb paper and cardboard absorbency method), which is used to test the absorbency of paper and cardboard, but not applied to evaluate the writing capability of paper and cardboard.Technical parameters:Metal cylinder inside area100±0.2cm², height: 50mmAbsorbency paper200~250g/m²Absorbency speed75mm/10minSmooth metal rollerwidth:200±0.5mm, weight:10±0.5kgDimension390×280×410 (mm)Weight 25kgOptional Balance: accuracy 0.001g, measure range 500gStopwatch: 1sGlass graduate: 100ml Cobb sample cutter
Contact Now
SKZ112-3 Corrugated fiberboard Flat Crush Test sample cutterSample area64.5cm2 , 32.2cm2Result error±0.5cm2Sample thickness≤7mmWeight 2.5kg
Contact Now
Be measured heat sealing temperature range of sealing compound, heat sealing strength, hot package of speed, heat sealing pressure, used for plastic, flexible packaging composite membrane, coated paper, foil. 1. Structure: It contains air drive system, sealing devices, temperature-conditioning systems, time-conditioning systems2. Air-driven system: Including pressure gauges, guide rods, cylinder, pneumatic valve, pressure regulator handles, so on.
Contact Now
SKZ108 Paper Mullen Bursting Strength Testing Meter Tester EquipmentApplicationUsed to determine a variety of paper and not more than 2000kpa monolayer of thin cardboard, or a variety of single and multi-layer cardboard and corrugated cardboard can also be used to detect silk cotton and other non-paper products.PrincipleIt adopts signal transmitting press.
Contact Now
Burst tester is the basic instrument for testing the anti-bursting degree of paper or cardboard, using Mullen test methods. ApplicationUsed to determine a variety of paper and not more than 2000kpa monolayer of thin cardboard, or a variety of single and multi-layer cardboard and corrugated cardboard can also be used to detect silk cotton and other non-paper products.StandardsISO 2759, ISO 2758. PrincipleIt adopts signal transmitting press.
Contact Now
SKZ125 Rapid-kothen Sheet Former Paper Sheet Making Test MachineFeature: 1.Mainly composed by dryers, vacuum pumps, and sheet former (press)2.Sheet former parts: power-driven drain off water, white water cycle use, power-driven feed water, aerodynamic homogenate ( also can manual homogenate), Water molding or vacuum pump suction molding3.Dry parts adopt vacuum heating and drying, vacuum pump adopts water cycle, heating element use heating plate, temperature control system, and has a short circuit, disconnection, and automatic over-temperature alarm function, with a stop anti-oil
Contact Now
High Quality Box Compression Tester SKZ121Box Compression Tester is applicable in testing the compression endurance and stacking strength and press standard of corrugated carton. Test items:●Compressive test: to determine the maximum compression strength●Stacking test: to determine the stacking strength test,12 hours, 24 hours●Pressure standards test: testing whether the box reaches the preset compression or deformation of the requirements Standards:ISO2234, ISO2233, ISO2206, ISO12048. ISO2874, ISO2872.
Contact Now
Used to measure dynamic, static friction coefficient of plastic film in sliding, so that to control the opening of packaging bags and speed of packaging machine.Features:1.LCD display: data, results, curves2. dynamic and static friction coefficient test3.
Contact Now
The Introduction of SY Series SpectrophotometerSY series is a new spectroscopic colorimeter launched by FRU. SY has rapid measurement, accurate data and fashionable appearance. It adopts a combination of LED light source with high life and low power consumption, which enables you to accurately position and measure the sample surface at your whim. Can be widely used in paint, plastic, resin, textile, leather and other fields, to help you complete the ideal color control.Product Features:1.
Contact Now
SKZ MINIMETA Portable Co MonitorMiniMeta is the ultimate choice for reliable, cost-effective, and easy-to-use detection, guaranteeing operational compliance and worker safety. This protection-free single fuel detector offers up to two years of maintenance-free operation, eliminating the need for calibration, sensor replacement, battery changes, or recharging. Widely utilized in industries like petroleum, petrochemical, metallurgy, and chemical engineering, it excels in detecting various hazardous gases such as carbon monoxide, hydrogen sulfide, oxygen, and sulfur dioxide.Feature1.
Contact Now
This equipment is designed for testing the plasticity and resilience of raw rubber, plastic rubber, and rubber. It requires precise temperature control and a digital instrument for setting and displaying temperature and time.Standard:GB/T12828 and ISO7323-1985.Technical parameters:Specimen suffered pressure49N±0.05NTemperature control70℃±1℃ (optionally set in the range of 100℃)Time range 3minIndicating range0-30 (mm)Indicating accuracy0.01mmPower 220V, 50HZ, 700WDimension 360×280×570 (mm)Net weight35kg
Contact Now
ISO 132 133 rubber fatigue (Flex) cracking machineFeatureThe host and controller feature digital settings, LED displays for flexible timing, and automatic stand functionality.Secure the specimen individually in the clamp.
Contact Now
The rubber fatigue (Flex) cracking machine is used to test the cracking performance of vulcanized rubber and rubber shoes by repeated flex.Standard: ISO132, ISO133.Feature 1.Host and controller with digital setting, LED display flex times and automatic stands. 2.Separately fix the specimen in the clamp. It is the newest improved testing machine.Technical parameters:Frequency of down clamp300r/minAdjustable max distance between upper and down clamp200mmAdjustable max distance of eccentric wheel50mmMax trip of down clamp100mmDimension1000*500*1200 (mm)Net weight200kg
Contact Now
SKZ1050C NH3 H2S 2 In 1 Ammonia Hydrogen Sulfide Portable Sensor Multi Gas DetectorOperation1. A single key that can be removed from misuse situations to restore the system to its initial configuration.2. There are two configurable sound and light alarm locations.3. A large-capacity lithium polymer rechargeable battery.4.
Contact Now
PH110B Portable Ph MeterPRODUCT SPECIFICATIONSModelPH110BParameterspH/mVpHRange-0.000 to 14.000 pHResolution 0.1pHAccuracy±0.03 pHCalibration PointsUp to 2Standard RecognitionNF buffersmV/ORPRange-1400 to 1400 mVResolution1 mVAccuracy±0.2%FSMeasurementReading ModeContinuousTemp.
Contact Now