Burst tester is the simple instrument for checking out the anti-bursting diploma of paper or cardboard, the usage of Mullen check methods. ApplicationIt is used to decide a range of paper and no longer extra than 2000kpa monolayer of skinny cardboard, or a range of single and multi-layer cardboard and corrugated cardboard can additionally be used to notice silk cotton and different non-paper products. StandardsISO2759, ISO 2758. PrincipleIt adopt
Contact Now
Burst tester is the basic instrument for testing the anti-bursting degree of paper or cardboard, using Mullen test methods. ApplicationUsed to determine a variety of paper and not more than 2000kpa monolayer of thin cardboard, or a variety of single and multi-layer cardboard and corrugated cardboard can also be used to detect silk cotton and other non-paper products.StandardsISO 2759, ISO 2758. PrincipleIt adopts signal transmitting press.
Contact Now
Auto Pneumatic Bursting Strength TesterDetermination pressure for a variety of fabrics, including knits, woven fabric, non-woven fabric, laminated fabric and other craft-made variety of fabrics, in standard conditions or under wet bursting strength and bursting dilation. Standards ISO13938-2, ASTM D3786, IWS Tm29Test principleThrough the circular clamping the sample holder can be extended in the diaphragm, the gas pressure applied below the diaphragm, the diaphragm and the sample expansion.
Contact Now
Product DescriptionDigital Bursting Strength Tester SKZ156B Used for testing the burst force and degree of fabrics, non-woven fabrics, leather, When under force in all directions at the same time (elastic diaphragm method).Standards: ISO2960, ISO13938.1-04, ASTMD3786, JIS1018Features:1. Meeting the testing area of 50cm2（Φ79.8mm） 2. Sample clamp support system 3. Supporting on-line communicationProduct ParametersTesting range0-2 Mpa (B type)The min. value0.002MpaTest area50cm2(Φ79.8mm), (B type)Elastic mold-plate size≤2mmThe max. burst length70±0.02mmThe max.
Contact Now
SKZ108C Bursting Strength Of PaperApplicationUsed to detect a range of paper products and thin cardboard layers with a maximum density of 2000 kpa. It may also be used to detect different types of single and multi-layer cardboard, corrugated cardboard, silk cotton, and other non-paper items.StandardsISO2759, ISO 2758. PrincipleIt uses a button for signal transmission.
Contact Now
SKZ128A Shore A Hardness TesterThe shore hardness tester is used to measure the hardness of vulcanized rubber and plastic. The hardness head is mounted on a stand, but it can also be removed for spot testing.
Contact Now
Ink Absorption Tester SKZ308Ink absorbency tester is the determination of paper or cardboard in a specific time and area to absorb standard ink performance. Technical parameter:Speed15.5 ± 1.0cm / minInking platen opening area20 ± 0.4cm2Inking platen thickness0.1mmInk absorption timeAutomatic control120 ± 5sPower220V ± 10% 50Hz, 90WDimensions530 × 318 × 276mmWeight33Kg
Contact Now
Lab Vibration Tester SKZ126AThis tester is applicable to toys, electronics, furniture, gifts, ceramics, packaging and other products to simulate transport tests, accords with the U.S.
Contact Now
SKZ128A Durometer Hardness Tester For RubberA shore hardness tester is used to determine the hardness of vulcanized rubber and plastic.The hardness head has been mounted on the stand.
Contact Now
Crush Tester is used to do the Ring Crush test, Edge Crush Test, Flat Press Test, Adhesive Strength Test, and Paper Tube Compress Test.We also have the accessories for its each test. Standards:ISO 3070, ISO 12192-2011, ISO 7263-2011, ISO 3035-2011 Feature：1. Microprocessor control, automatically carry the test according to testing requests. 2. Protect press sensor through the protection switch for over- loading. 3. Analyzing the group of testing data and to show the maximum, minimum, average, 4.
Contact Now
SKZ1017B Five point heat sealing apparatusThe Five-point heat-seal Tester, also known as the gradient heat seal tester, is a versatile tool used to determine various parameters related to heat sealing. It can be used to determine the heat sealing temperature range, suitable packaging speed, and heat sealing pressure of different materials such as plastic film substrates, flexible packaging composite films, coated paper, and other heat sealing composite membranes.
Contact Now
Falling Hammer Impact Tester SKZ148BUsing Double tube structure, Mainly consists: workbench, Prevent secondary impact mechanism, Hammer, Lifting mechanism, Automatic drop hammer mechanism, Motor, reducer, Electric control box and StandWidely used in a variety of plastic pipe impact resistance of measurement, and also for plates, profiles measured impact. StandardISO 3127, MT-558, ISO 4422 Technical parametersMaximum impact height2000mmHeight positioning error≤ ± 2mmHammer weight0.25 ~ 10.00Kg (0.125Kg / per increment)Optional 15.00KgHammerD25, D90Lift hammer modeAuto (also can hand t
Contact Now
Five-point heat-seal Tester (also known as gradient heat seal tester) can be used to determine the heat sealing temperature range , suitable packaging speed, and heat sealing pressure of the plastic film substrate, the flexible packaging composite film, coated paper and other heat sealing composite membrane. It can also work with tensile tester to do heat seal strength test. Structure: Divided into four parts of the air drive system, heat sealing device, temperature control system, time-conditioning systems. 1).
Contact Now
SKZ144 Vicat Softening Temperature Tester Used to measure polymer materials' Vicat softening and heat distortion temperatures. Feature 1.Setting the temperature with a temperature controller and measuring distortion with a meter.2.The specimen stand has an automated up/down motion and can test three specimens simultaneously.Standard:ASTM-D1525, ASTM-D648, DIN53460,DIN53461,ISO-306,ISO-75Technical parameters: Temperature rangeroom temperature~350℃Heating speed(12±1)oC/6min[(120±10)oC/h](5±0.5)oC/6min[(50±5)oC/h]Max temperature error±0.1℃Measuring range of distortion0-1mmMeasu
Contact Now
SKZ182A Crease Recovery Tester Used for testing fabric recoverability after being creased.Standard: ISO2313, AATCC66 M&S.Feature:
1.Shade-black-box design, rotary-Position
2.Pressure increasing and relief manually controlled , stepper motor flap
3.CCD imaging, dynamic and static images processing
4.A variety of charts and data statistic, analysis, storage and output
5.Built-in electrical angle measuring device by computer software, the results can be amended in accordance with imaging data to process the complex situation of testingWarranty1 yearCustomized supportOEMBrand NameSK
Contact Now
SKZ144 Rubber Vicat Softening Point Tester used to calculate the Vicat softening and heat distortion temperatures of polymer materialsCharacteristic1.Using a temperature controller to set the temperature and a meter to measure distortion.2.
Contact Now
SKZ129B DIN Abrasion Tester DIN AbraderStandard ISO4649, DIN 53516Technical parameters:Sample load2.5N, 5N,10NStroke40m or 20mRoller speed40 ± 1r/minRoller diameterФ150 ± 0.2mmRoller length460mmSample dia.Ф16 ± 0.2mmPowerAC220V ± 10% 50HzDimension700mm × 340mm × 300mmWeight63kgEXCELLENT PERFORMANCE,SUPERB TECHNOLOGYStainless steel rollerAnti-corrosion and anti-rustThe operation interface is simple and clearStandard: lS04649, DIN 53516PRODUCT DISPLAYSKZ129B is suitable for wear testing ofelastic materials, rubbertires, conveyor belts, soles, soft synthetic leather, leather andother materials, w
Contact Now
Product DescriptionDown Filling Power Tester JISL 1903 DigitalUsed to test the feather and down filling power.Measurement accuracy: 0.1mmMeasuring height: 750 mmStandard:IDFB-FP, JIS L1903, BSEN12130JIS L1903(Testing methods for feathers): This Japanese Industrial Standard specifies testing methods for down and feather intended for filled manufactured articles.Product ParameterMeasurement accuracy0.1mmMeasuring height750mmMeasurement speed0-1000mm / min adjustableCylinder diameter288mm, 245mmOptional 290 mm, JISL1903, BSEN12130Measuring pressure plate94.25g, diameter 284 mm68.4g diameter
Contact Now
Automatic Carton Stiffness Tester SKZ105BThe tester is used to evaluate the stiffness and resiliency of cardboard by international Taber method.Feature1. 5.7in LCD, real-time display stiffness value and curves2. Automatic zero adjustment.3. Display memory, statistics and print of test results4. The angle can be set between (1 ~ 90) °.5. Test time is within a predetermined range (3s ~ 35s) arbitrarily set.6.
Contact Now
Product DescriptionLab Manual Yarn Twist Tester SKZ192C Used for testing the twist nonhmogeneitiy, the twist unevenness, and the twist shrinkage of various yarns and for product quality inspection to eliminate problems in the process.Standards: GB/T2543.1/2 FZ/T10001 ISO2061 ASTM D1422 JIS L1095Features:1. Driving form: By hand operating.2.
Contact Now
High Quality Box Compression Tester SKZ121Box Compression Tester is applicable in testing the compression endurance and stacking strength and press standard of corrugated carton. Test items:●Compressive test: to determine the maximum compression strength●Stacking test: to determine the stacking strength test,12 hours, 24 hours●Pressure standards test: testing whether the box reaches the preset compression or deformation of the requirements Standards:ISO2234, ISO2233, ISO2206, ISO12048. ISO2874, ISO2872.
Contact Now
SKZ129B DIN Abrasion Tester DIN AbraderStandardISO4649, DIN 53516Technical parameters:Sample load2.5N, 5N,10NStroke40m or 20mRoller speed40 ± 1r/minRoller diameterФ150 ± 0.2mmRoller length460mmSample dia.Ф16 ± 0.2mmPowerAC220V ± 10% 50HzDimension700mm × 340mm × 300mmWeight63kgEXCELLENT PERFORMANCE,SUPERB TECHNOLOGYStainless steel rollerAnti-corrosion and anti-rustThe operation interface is simple and clearStandard: lS04649, DIN 53516PRODUCT DISPLAYSKZ129B is suitable for wear testing ofelastic materials, rubbertires, conveyor belts, soles, soft synthetic leather, leather andother materials, wi
Contact Now
Hydrostatic/Burst Tester is used to determine the long-term hydrostatic strength and instant blasting of PVC,PE,PPR,ABS and other plastic pipes. Standards: ISO1167-2006, ASTMD1598-2004, ASTMD1599, ISO9080, CJ/T108, ASTMF1335. Mainframe1.It is controlled both by PC and “Precision Pressure Controlling Unit”.2.It has LCD screen3.Every station controls separately.
Contact Now
Schopper-Riegler Beating Freeness Tester MachineStandards:QB/T1054-98, GB/T3332-1982 and ISO5267/1.Feature:1. hydraulic pressure structure with stainless steel2. confirms to Standard ISO 3332-1982 and ISO5267/13.
Contact Now
