Moisture Vapour Transmission Rate-manufacture,factory,supplier from China

SKZ172B Water Vapor Transmission Rate TestingTo determine Water-Vapour Permeability of fabric. Used for testing the moisture permeability of all kinds of fabrics, including moisture-permeable coated fabrics and nonwoven fabrics.Standards:ASTM E90-00 ASTM E96  JIS L1099A  BS 7209  JIS L1099BFeature 1. Rotary cup holder 2. Three layers test cup holder, suitable for high-volume testing 3. Three test areas, seperate air duct, temperature and humidity constant and uniform 4. Three test areas wind speed calibrated independently 5.

SKZ145 Melt Flow Rate TesterMelt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin must be determined for engineering plastics, which have higher melt temperatures, such as polycarbonate, nylon, and fluorine plastics; and for fit for plastics tests, which have lower melt temperatures, such as polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Product features:1.The control sy

LCD Melt Flow Indexer MRF MVR Meter ISO1133 400degree MFI EquipmentStandards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics —Part 1:Standard methodISO 1133-2:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics —Part 2: Method for materials sensitive to time temperature history and/or moistureGBT 3682.1-2018 "Plastic Thermoplastic Melt Mass Flow Rate (MFR) and Melt Volume Flow Rate (MVR) Determination"ASTM D1238-2013 "Standard Test Method

To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(cm3/10min) and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, polypropylene, ABS resin and poly-formaldehyde resin, etc, whose melt temperature are lower, widely applied to the fields of plastics materials, product, petrochemical.Standards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplas

KFT-40VC Karl Fischer TitratorFeatureVolumetric Karl Fischer Titration  ● Support KF Titration Mode and Titer Detection Mode. ● Features of auto-filling, auto-purging and auto-mixing of the reagents ensure safe handling of Karl Fischer chemicals. ● Automatic/manual background drift correction ensures accurate results.  ● Selectable units including mg, mg/L,% , ppm, etc. ● Settable parameters, including measurement unit, polarization current,   stirring rate, titration rate, stop volume, endpoint potential, stop criterion and etc. ● Store up to 20

White Oats Moisture Meter SKZ111B-2 PROFeature:1.Measure and get frequent moisture rate of forty three kinds of grains/seeds in the list2.The title of the nowadays chosen grain can exhibit up on the display, surprisingly Intelligent and uncomplicated to operate3.The meter can routinely calculate the moisture content material cloth and saved in reminiscence4.It approves to make a +/- adjustment to the dimension for all readings of a grain to be steady with the grain marke

Products DescriptionHot Selling Yarn Length Tester SKZ193BApplications:By the winder, the sample yarn on the through tube can be winded into skein yarns with a reel and the reeling tension be measured. It is used to measure a yarn length, designed for yarn linear density (or count) measurement and skein yarn strength test. Standard:ISO 2060.2, ISO2060, ASTM D1907, GB4743- 95Features: 1.Timing cog belt of direct transmission, no-lap skid. 2.Countint by optocoupler.

SKZ1018C Fully Automatic Volumetric Karl Fischer TitrationAdopted Karl Fischer volumetric moisture can be measured liquids, solids and gases in the sample crystal water, adsorbed water, free water. StandardsISO 10337,ASTM D 1744, ISO 760 , ASTM E203Feature1. Huge variety LCD show, English menu activity.2. Full powerful showcase, WINDOWS working style simple to utilize.3. Shown at the same time (dampness content, rate, PPM content, reagent utilization), variety titration bend dynamic showcase4.

SKZ108C Bursting Strength Of PaperApplicationUsed to detect a range of paper products and thin cardboard layers with a maximum density of 2000 kpa. It may also be used to detect different types of single and multi-layer cardboard, corrugated cardboard, silk cotton, and other non-paper items.StandardsISO2759, ISO 2758. PrincipleIt uses a button for signal transmission.

Product DescriptionDigital Textile Thickness Gauge SKZ185 Used to thickness determination for a variety of woven fabrics, knitted fabricsStandard: GB/T3820, FZ/T01003, ISO5084/9073/9863, ASTM D1777.Features:1. Digital display, with the adoption of electric elevating system, static balancer with a pulley, automatic timer and an electronic dial indicator for reading display.2. Using wear-resistant agate bearing is used as the guider and the rolling bearings are adopted for other transmission countershafts.3.

SKZ139 Rubber compression Deformation TesterContain by parallel steel plates, limiters and fasteners, used for vulcanized rubber, thermoplastic rubber in room temperature, high temperature and low temperature conditions, at a constant compression rate, after a certain compression time determination of the amount of deformation of rubber. Standard: ASTM-D395,ISO815.Technical parameters:Sample A: dia. 29mm, height: 12.5mmB: dia. 13mm, height: 6.3mmLimiters heightcompression rate 25%A: 9.3 ~ 9.4 B: 4.7 ~ 4.8Compression rate 15%A: 1

Main function:It can weigh material automatically.It can be powered off automatically.It can adjust temperature automatically.It can measure moisture automatically.It can correct moisture when empty.It has most advanced revising mode.The user can decide material kind and revise moisture error.Technical parameters: Measuring ObjectgrainMeasuring Moisture Range3-35%Measuring Accuracy±1%Measuring Time≤10 secondsWorking Power4 AAA batteries or external 9V DC power supplyAuto Power-off3 minutes shut down automaticallyWorking Temperature0-40℃Temperature AdjustingAutomaticallyNet

Product DescriptionLab Textile Thermal Resistance Tester SKZ175 For the warmth reteining performance (thermal resistance) detection of various fabrics, seam products and insulation materials, using hot plate, by heat-dispersing method.Standards: ISO11092, ASTMD1518, JIS-1096.Features:1. With a computer interface, and test software.2. Measured conductivity coefficient, heat rate, the CLO value. Automatic conversion heat rate, heat transfer coefficient, CLO value.3. Imported temperature sensor, accurate and reliable.4.

SKZ111H-1 Wood Moisture Meter1. Easy and quick: Adjust trees to enable precise determination of the moisture content of different types.2.

SKZ111K Soil Moisture MeterUsed to measure the amount of moisture in coal, concrete, sand, and gravel.CharacteristicWith a frequency of over 10 MHZ, the high-frequency principle is used in the 316L steel + PTFE sensor probe, which resists corrosion and wear.Switch stalls at the tenth measurement.Large measurement range, excellent accuracy, compact size, low weight, and speedy determination

SKZ111H-1 Firewood Moisture Meter1. Simple and quick: Modify trees to allow for accurate assessment of the moisture content of various varieties.2. Integrated structure: the cables' flaw was prevented by combining the probe and body.3. Japan advanced sensors, measure the moisture content of a variety of timber products, dry plank materials, and raw wood, ranging from 0% to 100%.4.200 g and 160 mm in size, the portable smart device is suitable for field use, lightweight, and easy to carry.5.

SKZ111C-3 Tea Leaves Black Green Jasmine Tea Moisture MeterUsed to evaluate the moisture content of various tea varieties.More than 10 MHZ of frequency using the high-frequency principle316L steel + PTFE makes up the sensor probe, which resists corrosion and wear.Switch stalls at the tenth measurement. DIGITAL  DISPLAYZEROON/OFFGEARPACKING AND TRANSPORTATIONevery details will be checked to assure the produc

Walnut Kernel Dehydrated Vegetables Dried Nuts Moisture MeterSuitsble for:Dehydration cabbageDehydration red pepperDehydration pumpkin parDehydration green beansDehydration onionDehydration pumpkin barDehydration potatoesDisplay LCD display Measuring range0 ~ 80%Resolution0.1%Accuracy0%-10%: ±0.2%10%-40%: ±0.5%40%-80%: ±1%Probe 50mm Power 9V battery*1Dimesion 160mm × 60mm × 27mmNet weight/gross weight 250g/500g Package size 260X 220 X 100 mmSKZ International Co., Limited is a reputable supplier with a focus on quality, as evidenced by its Quality Management System Cert

Cotton Polyester Linen Velvet Moisture AnalyzerIt is compatible with acrylic, polypropylene fiber, cotton, polyester, linen, velvet, and wool.PRINCILE HIGH FREQUENCYTESTING THAT IS NOT DESTRUCTIVEDigital LCD display.RANGE OF MEASUREMENT: 0–40%50 mm is the scanning depth.TINY SIZESIMPLE TO TRANSPORT.FIT FOR USE IN THE FIELD PACKING AND TRANSPORTATIONevery details will be checked to assure the productUPS,FedEx Express,TNT,EMS,aramex,DHL WORLDWIDE EXPRESSProfile of the CompanyA highly accurate moisture measuring device with widespread use in many different industries is the cutting-edge SKZ

Product Introduction★ Flexible and flexible pumping system.The gas sampling pump's flow rate can be adjusted in ten increments to personalize the detection flow for varied settings.★ Multi-layered filter.The three-layer filter unit efficiently filters oil, water, dust, and other pollutants.

SKZ-1052 DSC Test Differential Scanning Calorimeter For LabDSC is designed to decide the internal warmth transition touching on to temperature and heat flow, it is extensively used in the area of polymer development, overall performance trying out & first-rate control.

Product descriptionSuitable for measuring the moisture content of waste paper bales, straw, wheat straw,forage, hay, sugar cane waste, corn stalks, corn silage, reeds, bamboo,abaca, tobacco leaf, botanicals, fern stalks.   Product ParameterDisplay LCD disply Measuring range0 ~ 80%Resolution0.1%Accuracy0%-10%: ±0.2%10%-40%: ±0.5%40%-80%:±1%Probe 600mm Power 9V battery*1Dimesion 160mm × 60mm × 27mmNet weight/gross weight 250g/1kg Package size 610 X 110 X 170 mmApplicationSuitable for measuring the moisture content of waste paper bales, straw, wheat straw, forage, ha

SKZ111B-2 PRO Digital Grain Moisture TesterFeature: 1.Its Similar appearance design DRAMINSKI TwistGrain pro Poland 2.There is a prompt sound, When the upper cap screw tightly3.4pcs of 1.5V AA battery 4.Measure and get average moisture value of 40 kinds of grains/seeds in the list5.The name of the currently selected grain can appear on the display, Intelligent and easy operate6.The meter can automatically calculate the moisture content and stored in memory 7.It allows to make a +/- adjustment to the measurement for all readings of a grain to be consistent with the grain dealers equipment8.Powe

SKZ111K-2 Chemical Silicone Silica Calcium Carbonate Moisture TesterTo measure moisture content of various alkali reactive dyes, chemical mineral raw materials, organic and inorganic chemicals, dyes, resins, detergents, plastic granules, rubber latex, silicone, silica, calcium carbonate.Technical parameters:DisplayLCD displyMeasuring range0 ~ 80%Resolution0.1%Accuracy0%-10%: ±0.2%10%-40%: ±0.5%40%-80%:±1%Probe600mmPower9V battery*1Dimesion160mm × 60mm × 27mmNet weight/gross weight250g/1kgPackage size610 X 110 X 170 mmADVANTAGES OF THE ITEMConvenient and wiseA broad range of meas