For the determination folding fatigue strength of the thickness of less than 1mm paper, cardboard and other sheet materials. Using MIT folding method. Color touch-screen display, folding fixture automatically return after each test, statistics of the same group of multiple samples of the data, the maximum, minimum, average and coefficient of variation. ApplicationsFolding Endurance: Under specified conditions, the number of double folding that the test specimen can withstand before breaking indicates the ability of the test specimen to be repeatedly folded.
Contact Now
SKZ145 Melt Index Tester Mfi TesterFor engineering plastics such as polycarbonate, nylon, and fluorine plastics, whose melt temperatures are higher, as well as fit for plastics tests of polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc., whose melt temperatures are lower, the following parameters must be determined: melt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Char
Contact Now
Tumble Dryer For Textile Shrinkage Tester SKZ162-1Used for the drying of fabrics, clothing and other textiles after shrinkage test.Standard: ISO06330 Technical parametersRated dry sample capacity10kgDrying temperatureroom temperature -80 ℃Drum diameter695mmDrum depth435mmRoller volume165LRoller speed50 r /minLifting pieces No. 3 (120 degrees apart)PowerAC220v • 50Hz 5.5 KWDimensions 785 × 960 × 1365mmWeight100Kg
Contact Now
Automatic Carton Stiffness Tester SKZ105BThe tester is used to evaluate the stiffness and resiliency of cardboard by international Taber method.Feature1. 5.7in LCD, real-time display stiffness value and curves2. Automatic zero adjustment.3. Display memory, statistics and print of test results4. The angle can be set between (1 ~ 90) °.5. Test time is within a predetermined range (3s ~ 35s) arbitrarily set.6.
Contact Now
SKZ128 Digital Shore Hardness Tester Plastic and rubber that have been vulcanized are tested for hardness using a shore hardness tester. The stand holds the hardness head in place. To perform spot testing, you can also remove the head from the stand.
Contact Now
IGT Printability Tester SKZ1032Printability Tester is a most basic designed for paper and paperboard printing picking printability test development of computer process control apparatus. Applicable to all kinds of offset, letterpress and gravure paper and cardboard printing simulation test. Equipped with a high speed ink refilling equipment, a standard scale, aluminum printing plates, wrapping paper.StandardsISO3782, GB/T2679.15, QB/T1058,TAPPI 514 and 575, SCAN P 63:90 Feature: ① the control system accurate.
Contact Now
Product DescriptionLab Mace Snagging Tester SKZ168 To determine the snagging resistance of fabrics by Mace test method.Standards: GB/T11047-89, ASTMD3939, JISL1058Features:1. 4 testing positions for fast test, time-saving and stability.2. Digital display, rotary motor, chain wheel, aluminum alloy drum, mace, fixed guide rod, adjusting guide rod and counter on the control panel.3.
Contact Now
SKZ128A Shore A Hardness TesterThe shore hardness tester is used to measure the hardness of vulcanized rubber and plastic. The hardness head is mounted on a stand, but it can also be removed for spot testing.
Contact Now
SKZ1017B Five point heat sealing apparatusThe Five-point heat-seal Tester, also known as the gradient heat seal tester, is a versatile tool used to determine various parameters related to heat sealing. It can be used to determine the heat sealing temperature range, suitable packaging speed, and heat sealing pressure of different materials such as plastic film substrates, flexible packaging composite films, coated paper, and other heat sealing composite membranes.
Contact Now
Lab Vibration Tester SKZ126AThis tester is applicable to toys, electronics, furniture, gifts, ceramics, packaging and other products to simulate transport tests, accords with the U.S.
Contact Now
Product DescriptionDown Filling Power Tester JISL 1903 DigitalUsed to test the feather and down filling power.Measurement accuracy: 0.1mmMeasuring height: 750 mmStandard:IDFB-FP, JIS L1903, BSEN12130JIS L1903(Testing methods for feathers): This Japanese Industrial Standard specifies testing methods for down and feather intended for filled manufactured articles.Product ParameterMeasurement accuracy0.1mmMeasuring height750mmMeasurement speed0-1000mm / min adjustableCylinder diameter288mm, 245mmOptional 290 mm, JISL1903, BSEN12130Measuring pressure plate94.25g, diameter 284 mm68.4g diameter
Contact Now
SKZ128A Durometer Hardness Tester For RubberA shore hardness tester is used to determine the hardness of vulcanized rubber and plastic.The hardness head has been mounted on the stand.
Contact Now
SKZ129B DIN Abrasion Tester DIN AbraderStandard ISO4649, DIN 53516Technical parameters:Sample load2.5N, 5N,10NStroke40m or 20mRoller speed40 ± 1r/minRoller diameterФ150 ± 0.2mmRoller length460mmSample dia.Ф16 ± 0.2mmPowerAC220V ± 10% 50HzDimension700mm × 340mm × 300mmWeight63kgEXCELLENT PERFORMANCE,SUPERB TECHNOLOGYStainless steel rollerAnti-corrosion and anti-rustThe operation interface is simple and clearStandard: lS04649, DIN 53516PRODUCT DISPLAYSKZ129B is suitable for wear testing ofelastic materials, rubbertires, conveyor belts, soles, soft synthetic leather, leather andother materials, w
Contact Now
Burst tester is the simple instrument for checking out the anti-bursting diploma of paper or cardboard, the usage of Mullen check methods. ApplicationIt is used to decide a range of paper and no longer extra than 2000kpa monolayer of skinny cardboard, or a range of single and multi-layer cardboard and corrugated cardboard can additionally be used to notice silk cotton and different non-paper products. StandardsISO2759, ISO 2758. PrincipleIt adopt
Contact Now
SKZ144 Rubber Vicat Softening Point Tester used to calculate the Vicat softening and heat distortion temperatures of polymer materialsCharacteristic1.Using a temperature controller to set the temperature and a meter to measure distortion.2.
Contact Now
SKZ182A Crease Recovery Tester Used for testing fabric recoverability after being creased.Standard: ISO2313, AATCC66 M&S.Feature:
1.Shade-black-box design, rotary-Position
2.Pressure increasing and relief manually controlled , stepper motor flap
3.CCD imaging, dynamic and static images processing
4.A variety of charts and data statistic, analysis, storage and output
5.Built-in electrical angle measuring device by computer software, the results can be amended in accordance with imaging data to process the complex situation of testingWarranty1 yearCustomized supportOEMBrand NameSK
Contact Now
Burst tester is the basic instrument for testing the anti-bursting degree of paper or cardboard, using Mullen test methods. ApplicationUsed to determine a variety of paper and not more than 2000kpa monolayer of thin cardboard, or a variety of single and multi-layer cardboard and corrugated cardboard can also be used to detect silk cotton and other non-paper products.StandardsISO 2759, ISO 2758. PrincipleIt adopts signal transmitting press.
Contact Now
Ink Absorption Tester SKZ308Ink absorbency tester is the determination of paper or cardboard in a specific time and area to absorb standard ink performance. Technical parameter:Speed15.5 ± 1.0cm / minInking platen opening area20 ± 0.4cm2Inking platen thickness0.1mmInk absorption timeAutomatic control120 ± 5sPower220V ± 10% 50Hz, 90WDimensions530 × 318 × 276mmWeight33Kg
Contact Now
SKZ136 Rubber Impact Resilience TesterRubber Impact Resilience Tester is the pendulum impact resiliency tester with energy 0.5J and applied to measure the resilience value of vulcanized rubber with hardness 30—85IRHD. It measures up to ISO4662, ASTM-D 1054-66,DIN 53512. Rubber Impact Resilience Tester is the pendulum impact resiliency tester to measure the resilience value of vulcanized rubber.
Contact Now
Product DescriptionDigital Bursting Strength Tester SKZ156B Used for testing the burst force and degree of fabrics, non-woven fabrics, leather, When under force in all directions at the same time (elastic diaphragm method).Standards: ISO2960, ISO13938.1-04, ASTMD3786, JIS1018Features:1. Meeting the testing area of 50cm2（Φ79.8mm） 2. Sample clamp support system 3. Supporting on-line communicationProduct ParametersTesting range0-2 Mpa (B type)The min. value0.002MpaTest area50cm2(Φ79.8mm), (B type)Elastic mold-plate size≤2mmThe max. burst length70±0.02mmThe max.
Contact Now
Schopper-Riegler Beating Freeness Tester MachineStandards:QB/T1054-98, GB/T3332-1982 and ISO5267/1.Feature:1. hydraulic pressure structure with stainless steel2. confirms to Standard ISO 3332-1982 and ISO5267/13.
Contact Now
Hydrostatic/Burst Tester is used to determine the long-term hydrostatic strength and instant blasting of PVC,PE,PPR,ABS and other plastic pipes. Standards: ISO1167-2006, ASTMD1598-2004, ASTMD1599, ISO9080, CJ/T108, ASTMF1335. Mainframe1.It is controlled both by PC and “Precision Pressure Controlling Unit”.2.It has LCD screen3.Every station controls separately.
Contact Now
SKZ1011 COF Equipment Friction Coefficient Tester Standards:ISO8295, ASTMD1894, TAPPIT816Technical parameters:Dimension of slider63×63 (mm)Weight of slider200±2g (500g)Sample size80×200 (mm)Testing accuracy±0.5%Speed of slider100 mm/minRange0-5NStroke70mm, 150mmPower220V, 50HZDimension400×300×180 (mm)Weight30kgSKZ1011 FRICTON COEFFICIENT TESTERWe welcome customers to contact us for future businessrelationships and mutual success!High qualityproductFast DeliverySpecializedPerfect after-salesfactoryserviceSKZ INTERNATIONAL CO..
Contact Now
SKZ105B Paper Carton Taber Bending Stiffness Tester MachineFeature 1. 5.7in LCD, real-time display stiffness value and curves2. Automatic zero adjustment.3. Display memory, statistics and print of test results4. The angle can be set between (1 ~ 90) °.5. Test time is within a predetermined range (3s ~ 35s) arbitrarily set.6.
Contact Now
