Medium Fluter Testing Equipment-manufacture,factory,supplier from China

High Quality Concora Medium Fluter (CCT, CMT) SKZ113To determinate of flat crush strength of corrugated paper when pressed standard waveform (i.e., from the flute corrugated base paper), comply with standard: ISO7263-1985: corrugating medium – Determination of flat crush resistance after laboratory fluting.Feature: 1.Using single-chip microprocessor control technology, Precision temperature controller 

Suitable for all kinds of film, shrink film, heat shrink pipe, back plate. Such as the overall collection of various beverage packaging shrink film, shrink packaging film for medical packaging. Testing of the heat shrinking properties in a liquid medium at various temperatures.

Laboratory Rotary Digester Testing EquipmentFeatures1. Versatility: It is designed for caustic cooking and acid cooking, and can also be used for cooking and bleaching of other liquidswith a work pressure not exceeding 8Kg/cm².  This versatility allows it to be used in a wide range of chemical processes.2. Durable Construction: The device is primarily composed of high-quality stainless steel, which ensures high corrosion resistance and longevity.3.

SKZ1061C Thermal Conductivity Testing Equipment** The SKZ1061C Thermal Conductivity Testing Equipment is an outstanding testing instrument that employs the advanced Transient Plane Source (TPS) technique.

SKZ126A Vibration Testing MachineThis tester can be used to mimic transport testing for a variety of products, including toys, electronics, furniture, presents, ceramics, packaging, and other items.

SKZ148 Drop Dart Impact TesterThe impact resistance of plastic films and sheets is tested using a dart impact testing equipment, which uses a background light source to record test findings.StandardISO7765-85, GB9639-88, ASTM D1709 - 09 Technical parametersDart-head weight50-2000g, 5g/incremental (5g*5pcs,15g*15pcs, 30g*10pcs, 45g*10pcs, 80g*10pcs, 90g*15pcs)Dart-head semi-diameterA method: R19±1mm,B method: 25±1mmDart-head accuracy0.1%Impact height660mm, 1500mmImpact energy30JSample clamp deviceexternal dia.: 150mm, inside dia.: 125mmWorking t

SKZ1011 COF Equipment Friction Coefficient Tester Standards:ISO8295, ASTMD1894, TAPPIT816Technical parameters:Dimension of slider63×63 (mm)Weight of slider200±2g (500g)Sample size80×200 (mm)Testing accuracy±0.5%Speed of slider100 mm/minRange0-5NStroke70mm, 150mmPower220V, 50HZDimension400×300×180 (mm)Weight30kgSKZ1011 FRICTON COEFFICIENT TESTERWe welcome customers to contact us for future businessrelationships and mutual success!High qualityproductFast DeliverySpecializedPerfect after-salesfactoryserviceSKZ INTERNATIONAL CO..

SKZ172B Water Vapor Transmission Rate TestingTo determine Water-Vapour Permeability of fabric. Used for testing the moisture permeability of all kinds of fabrics, including moisture-permeable coated fabrics and nonwoven fabrics.Standards:ASTM E90-00 ASTM E96  JIS L1099A  BS 7209  JIS L1099BFeature 1. Rotary cup holder 2. Three layers test cup holder, suitable for high-volume testing 3. Three test areas, seperate air duct, temperature and humidity constant and uniform 4. Three test areas wind speed calibrated independently 5.

SKZ1061C Thermal Conductivity Testing Equipment PriceIt can be used for a number of warmth conduction residences of one-of-a-kind kinds of substances testing. Transient Plane Source technique is to learn about the thermal conductivity method, the ultra-modern one, which makes size technological know-how to a entire new level. In the find out about of cloth succesful of speedy and correct size of thermal conductivity for the employer first-class control, fabric manufacturing and laboratory research grant a outstanding convenience.

Used to test product packaging for damage and evaluate impact resistance and the transport handling process; mostly used to ensure that product packaging can withstand the circumstances of transport capacity and hence enhance and optimize packaging design.Standard:ISO2248, JISZ0202-87Qualities:With a digital height indicator and height tracking decoder, a single wing drop tester may perform a free drop test of the package's surface, angle, and edge.

SKZ0154 Universal Tensile Testing MachineFor tensile, compression, bending, shear, tear, peel performance test.Feature1.Use of the Windows 7 operating system platform, graphical and graphical software interface, flexible data processing, modular programming language (VB), and safety limit protection are features of the measurement and control software.2. With the ability to automatically create algorithms and change test reports3.

SKZ101A Tensile Testing MachinePaper and board are tested for tensile strength using this apparatus, which has an accurate auto control and data gathering system.Characteristic1) Touch screen display in color.2) A large range of steady and effective adjustments can be made to the test force.3) Show real-time test force, test speed, and test displacement.4) Following a test, it can automatically revert to its initial position.5) Equipped with overload, overcurrent, and limit position protection.6.

Shore hardness tester is applied to test the hardness of vulcanized rubber and plastic. The hardness head is installed on the stand. You can also take the head from the stand to carry spot testing.

High and low temperature test chamber is one of the climate simulation chambers for the assessment of various electronic products, test at high temperature, low temperature environment.Features:1.Unique balance thermostat, high precision, high temperature stability control.2.Temperature controller with high precision, high stability, PID self-tuning, LED visual display, to ensure precise control of equipment. Equipment with over-temperature3.

Ozone aging test chamber is one of the climate simulation test equipment for testing vulcanized rubber in the static and dynamic tensile deformation state, exposure to air containing a certain concentration of ozone and a certain temperature environment, but no direct sunlight under the harsh Adaptability test conditions for a variety of research institutes and factories and mines laboratory test samples for the aging test.

SKZ1053 High Pressure Automatic Thermogravimetric Analysis LabThermo gravimetric evaluation (TG, TGA) is to look at the exchange of pattern high-quality with temperature or time in the manner of heating and consistent temperature, the motive is to find out about the thermal balance and composition of the material.Widely used in the lookup and development, procedure optimization and satisfactory manipulate of plastics, rubber, coatings, pharmaceuticals, cat

PH510T Portable PH MeterPRODUCT SPECIFICATIONSModelPH510TParameterspH/Temp.(mV/ORP)pHRange-2.000 to 20.000 pHResolution 0.1, 0.01, 0.001pHAccuracy±0.002 pHCalibration PointsUp to 8Standard RecognitionUSA, NIST, MERK, JIS, GB and DIN buffersStandard CustomizationYesSlope LimitYesmV/ORPRange-2000 to 2000 mVResolution0.1, 0.01 mVAccuracy±0.1 mV or ±0.03%EH ORP ModeYesORP Calibration Points1 custom point (relative mV)TemperatureRange-10 to 135 ºC, 14 to 275 ºFUnitºC, ºFResolution0.1Accuracy0.1MeasurementReading ModeAuto Read (Fast, Medium, Slow), Timed, ContinuousTemp.

SKZ111B-4 Rice Polisher Machine1.Complete the whole process of rice husking and brown rice grinding at one time, which can quickly and truly judge the quality of rice.2.Rice milling white effect is good, simple operation, short working time, dust leakage, beautiful appearance3.The head adopts high-tech alloy material, long service life, peeling, grinding white effect is good.4.Large sampling, operation, easy to carry, is the best equipment to judge the quality of rice, test yellow grain, sick class, belly white and imperfect particles.Sample weight170g (280ml)Fine rice broken rateJaponica rice

SKZ125 Rapid-kothen Sheet Former Paper Sheet Making Test MachineFeature: 1.Mainly composed by dryers, vacuum pumps, and sheet former (press)2.Sheet former parts: power-driven drain off water, white water cycle use, power-driven feed water, aerodynamic homogenate ( also can manual homogenate), Water molding or vacuum pump suction molding3.Dry parts adopt vacuum heating and drying, vacuum pump adopts water cycle, heating element use heating plate, temperature control system, and has a short circuit, disconnection, and automatic over-temperature alarm function, with a stop anti-oil

SKZ1062E Spray Laser Particle Size AnalyzerScopeIt is suitable for the detection of droplet size in small spray equipment such as medical nebulizers, atomized medicines, various aerosols and sprays. Feature1.Compact, portable achieve a real sense in the field of particle size analyzer2.Advanced integrated structural design, more stable3.Optical path combines advanced dust-proof design, without the need for secondary adjust the optical path, greatly improving test efficiency1.    Advanced light path design:It adopts the Fraunhofer diffraction principle and typical parallel o

Plastic Five points Heat Seal EquipmentFive-point heat-seal Tester (also known as gradient heat seal tester) can be used to determine the heat sealing temperature range , suitable packaging speed,  and heat sealing pressure of the plastic film substrate, the flexible packaging composite film, coated paper and other heat sealing composite membrane.

This equipment is designed for testing the plasticity and resilience of raw rubber, plastic rubber, and rubber. It requires precise temperature control and a digital instrument for setting and displaying temperature and time.Standard:GB/T12828 and ISO7323-1985.Technical parameters:Specimen suffered pressure49N±0.05NTemperature control70℃±1℃ (optionally set in the range of 100℃)Time range 3minIndicating range0-30 (mm)Indicating accuracy0.01mmPower 220V, 50HZ, 700WDimension 360×280×570 (mm)Net weight35kg

Laboratory Pulp AquapulperFunctions:1. Laboratory for virgin pulp or recycled pulp to beating, disintegration and deinking.2. Major laboratory equipment used to process pulp, broke, and waste paper.3. Assessment recycled pulp process, additives and quality 4.

SKZ128 Portable Rubber Shore Hardness Testing MachineStandard:ISO7619-1:2004: Rubber, vulcanized or thermoplastic--Determination of indentation hardness-part 1: Duromerer technique ( shore hardness)ISO 868:2003: Plastics and ebonite-Determination of indentation hardness through skill of a duromerer ( shore hardness)Technical parameters:Diameter of pressure needle1.25mm±0.15mmEnd diameter of needle0.79mm±0.03mm (Shore A), R0.1±0.012mm (Shore D)Pressure needle taper angle35°±0.25°Pressure needle trip0- 2.5mm±0.04mmRange of scale0HA-100HA (Shore A), 0-