SKZ1031 Laboratory pulp Dewatering dehydrator Tester MachineThe effect of the centrifugal force of 1400r/min high speed rotation, in the pulp water out and reached a certain degree of dry, in order to ensure the reliable data.
Contact Now
Laboratory pulp dehydratorThe effect of the centrifugal force of 1400r/min high speed rotation, in the pulp water out and reached a certain degree of dry, in order to ensure the reliable data. With the use of beating degree tester, it can obtain accurate pulp beating degree and humidity. Parameters:Drum SizeΦ126X100mmDrum capacity1.2LSpeed1400r/minTiming range01s ~ 999.9sPulp dryness20-30%PowerSingle-phase capacitor motor-180W-220VDimension570 × 225 × 460mmWeight30KG
Contact Now
Laboratory Pulp Disintegrator (also known as standard fiber Disintegrator, standard fiber stirrer), Suitable for laboratory wet disintegration of pulp: the disintegration is to separate the interwoven fibers in water after mechanical processing, and meanwhile to maximum remain fiber original structure properties unchanged, in order to ensure the experiment to obtain reliable data, using the original scientific research and production of effective, economy. Standards:ISO5263, JIS-P8220, TAPPI-T205
Contact Now
SKZ1027A/B/C/D Laboratory Valley Pulp BeaterLaboratory Valley pulp Beater, mechanical forces generated by the roll and the bottom knife, the fiber pulp was cutting, crushing, kneading, split, moistening and fiber thinning, meanwhile, the fiber cell wall displacement and deformation generated, the primary wall and outer wall broken.
Contact Now
Laboratory Pulp AquapulperFunctions:1. Laboratory for virgin pulp or recycled pulp to beating, disintegration and deinking.2. Major laboratory equipment used to process pulp, broke, and waste paper.3. Assessment recycled pulp process, additives and quality 4.
Contact Now
Laboratory Pulp Standard Fiber Disintegrator Wet DisintegrationLaboratory Pulp Disintegrator (also known as standard fiber Disintegrator, standard fiber stirrer), Suitable for laboratory wet disintegration of pulp: the disintegration is to separate the interwoven fibersin water after mechanical processing, and meanwhile to maximum remain fiber original structure properties unchanged, in order to ensure the experiment to obtain reliable data, using the original scientific research and production of effective, economy. Standards:ISO5263, JIS-P8220, TAPPI-T205Te
Contact Now
New Schopper-riegler Beating Pulp Tester SKZ115The instrument is applicable in testing all kinds of suspending pulp liquid that less than 100°SR--- Schopper-Riegler.Standards:QB/T1054-98, GB/T3332-1982 and ISO5267/1.Feature: 1. hydraulic pressure structure with stainless steel 2. confirms to Standard ISO 3332-1982 and ISO5267/13. filters’s material is phosphor bronze, with its working area 100cm2 Technical parameters:Range0-100°SRMinimum scale1°SRTemperature of distilled water20±0.5 ℃Volume of distilled water1000 mlDraining time149±1 sDimension460×250 (mm)Weight 35kg
Contact Now
Laboratory PFI Beater For beating test of middle and high concentrations pulps, so that to Analysis of high-grade paper. Principle:Placed the pulps, which is measured having a predetermined concentration, between the knife roller and the beating cylinder, rotating with different circumferential speeds. In order to achieve the purpose of beating pulp. Features:1. Main components made of stainless steel,2. Pulp pool with a knife roller are regulated speeds, belt drive,3. The counter can be set to the number of revolutions dissociation pulp,4.
Contact Now
SKZ1030 Laboratory Flotation CellFlotation deinking method is based on the principle of mine ore, according to the fiber, filler and ink composition of wettable, flotation cell in the 10 to 150 micron ink particles adsorbed on the air bubbles, floating to the surface to remove the pulp, fiber and filler remained in the pulp.It is mainly composed of a flotation tank, the circulation line, paper pulp pump, air bubble generating device, liquid discharging pipe. Parameters:Outfall up and down range of activities0 --100Flow calculation controlYes Tank capacity28 litersTank sizeΦ380 × 380mmTank
Contact Now
Fiber Classifier (Bauer Fiber Classifier) is the equipment used for measuring the weight-average fiber length of pulp fiber according to screening method by pulp and paper-making laboratory. Principle:Screening the pulp suspension into the vessel, the vessel is charged with mesh sieve, Container into a ladder type, the pulp suspension flows from one container to another container, in various different sieve to retain the fiber length pulp, retention of pulp fiber length and the sieve mesh size.
Contact Now
SR Beating Pulp Tester SKZ115Schopper-Riegler-This instrument is appropriate for checking out a number suspensions with SR much less than 100 ° C.Product Features:1. hydraulic stress shape with stainless steel2. confirms to Standard ISO 3332-1982 and ISO5267/13. filters’s fabric is phosphor bronze, with its working region 100cm2Specifications:Range0-100°SRMinimum scale1°SRTemperature of distilled water20±0.5 ℃Volume of distilled water1000 ml
Contact Now
Lab-Potcher is used to simulate the production process of rinsing pulp, can accomplish the process of pulp un-bleached washing, bleaching pulp, pulp bleached process.
Contact Now
Laboratory Paper Air Permeability Tester SKZ119The tester is applicable in testing the moderate air permeability of paper between 0 to17μm (Pa.S).
Contact Now
Laboratory Paper Dust Tester SKZ116 The tester is applied to test the dust of paper and cardboard. The parameters and performance conform to the standard of GB/T1541-1989 (Tappi T 437 om-1985) Technical parameters:Light source20W fluorescent lampIrradiation degree60°Working platformefficient area 0.0625 m², rotating 360°Standard dust image0.05-5.0(mm²)Dimension750×350×500 (mm)Weight12.5 kg
Contact Now
Laboratory Paper GSM Tester SKZ114CIt is the sample cutter for the test of all kinds of paper grammage and slice .The cutter conforms to the standard of QB/T1671—98. Technical parameters:Area100Cm2Specimen diameterΦ112.8±0.05mmSpecimen thicknesspaper: 0.1-1.0 (mm), cardboard: single wall <0.6mmDimension 270×260×405 (mm)Weight 15kg Structure and operationStructure: base, rack, gear, rack, upper edge and lower edge, specimen baffles, received board and operating handle.
Contact Now
Laboratory Turbidimeter SKZ1041AFor measuring suspended in water insoluble particulate matter generated by the degree of light scattering, to get the content of suspended particulate matter. Widely used in power plants, pure water plant, water plants and domestic sewage treatment plants, beverage plants, the environmental protection departments, industrial water, wine industry and the pharmaceutical industry, epidemic prevention departments, hospitals and other departments of the turbidity measurement. Principle:Turbidity, also called turbidity of water or transparent liquid.
Contact Now
Vibrating vacuum suction, so that compliant pulp fibers from open screening leak continues, not meet the requirements of fiber and wood residues left in the screen plate above, and then removed from the slag hole.Screening of impurities was measured in the pulp debris impurities, Use the pulp screen machine can reduce the number of impurities in the pulp suspension, get clean good pulp. Features:1. Adopt international standards, stainless steel tube frame, the main components made of stainless steel and copper.2.
Contact Now
Laboratory Rotary Digester Testing EquipmentFeatures1. Versatility: It is designed for caustic cooking and acid cooking, and can also be used for cooking and bleaching of other liquidswith a work pressure not exceeding 8Kg/cm². This versatility allows it to be used in a wide range of chemical processes.2. Durable Construction: The device is primarily composed of high-quality stainless steel, which ensures high corrosion resistance and longevity.3.
Contact Now
This Laboratory Digester used in caustic cooking and acid cooking, It can also be used to cooking and oxygen bleaching for other liquid work pressure is not more than 8Kg / cm2 Structural Features：1.The device is mainly composed of a machine frame, steamer, reducer, heating laps,rolling bearing, no carbon brush and slip ring, and a safety valve, temperature control instrument, a pressure gauge, a needle valve.2.This device part uses the high quality stainless steel , with high corrosion resistance.3.The heating part of the electric heating ring is composed of six pieces, direct
Contact Now
Laboratory Desktop Water Conductivity Meter1. High resolution LCD display, 5.7 inches.2. Multi-reading feature allows auto-read, timed-read and continuous-read.3. Automatic/Manual temperature compensation ensures accurate results.4. Auto-hold feature senses and locks the measurement endpoint.5. Data Storage 500 sets (GLP-compliant).6. Support for USB or RS-232 communication.7. Reset feature automatically resumes all settings back to factory default options.8. Waterproof: IP54.9. 1-3 points calibration with Standard Recognition.10.
Contact Now
Product DescriptionLaboratory Air Permeability Tester For TextileFor measuring the air permeability of a variety of textile fabrics, including industrial fabrics, nonwovens and other textile products and other breathable materials.Standards:GB/T 5453、GB/T 13764、ISO 9237、ASTM D737Feature:1. Automatic clamping, automatic nozzle replacement, quick test.2. Microcomputer processing, test results directly, without manual calculation.3. Chinese and English touch screen menu operation, configured with computer interface.4.
Contact Now
Product DescriptionLaboratory Fabric Down Proof Tester SKZ174 Testing the penetration resistance to feather and down of all kinds of textile fabrics.To determine the down-proof properties of fabric, rolling box method.Standards: GB/T12705, FTMS191A (Optional rubber ball)Product Features1. Adopts transparent cylinder as rotary box and has interlayer, can efficiently reduce the noise of balls impact the box.2. High performance motor, box rotate smoothly and stably.3. Box can automatically stop when the rotary number reach the preset value.4.
Contact Now
Hand Sheet Former SKZ124BAutomatic type hand sheet former, small dimension more precision and easy to operate, especially get rid of the air-pressure of traditional sheet former. Its sheet diameter Φ200, white water cycle, electromagnetism valve drain automatically, mini-type vacuum system. Main Accessory：copper mesh frame, Paper-making roller, copper mesh 60mesh or 80mesh, up and down water circulative system, air bubble smooth pulp sytem.ParameterCanister diameter200mmCanister capacity 8LPower 463WDimension 500mm×600mm×1300mm
Contact Now
EC310F Laboratory Cond Meter Water EC Conductivity Meter GENERAL FEATURES1. LCD display screen, 3.5 inches.2. Multi-reading feature allows auto-read, timed-read and continuous-read.3. Automatic/Manual temperature compensation ensures accurate results.4. Auto-hold feature senses and locks the measurement endpoint.5. Data capacity of up to 500 sets for each parameter (GLP-compliant).6. Support for USB communication.7. Auto-power off feature effectively extends the battery service life.8. Reset feature automatically resumes all settings back to factory default options.9. IP65 waterproof.
Contact Now
