Lab-Potcher is used to simulate the production process of rinsing pulp, can accomplish the process of pulp un-bleached washing, bleaching pulp, pulp bleached process.
Contact Now
Laboratory Pulp Disintegrator (also known as standard fiber Disintegrator, standard fiber stirrer), Suitable for laboratory wet disintegration of pulp: the disintegration is to separate the interwoven fibers in water after mechanical processing, and meanwhile to maximum remain fiber original structure properties unchanged, in order to ensure the experiment to obtain reliable data, using the original scientific research and production of effective, economy. Standards:ISO5263, JIS-P8220, TAPPI-T205
Contact Now
Laboratory Pulp AquapulperFunctions:1. Laboratory for virgin pulp or recycled pulp to beating, disintegration and deinking.2. Major laboratory equipment used to process pulp, broke, and waste paper.3. Assessment recycled pulp process, additives and quality 4.
Contact Now
SKZ1027A/B/C/D Laboratory Valley Pulp BeaterLaboratory Valley pulp Beater, mechanical forces generated by the roll and the bottom knife, the fiber pulp was cutting, crushing, kneading, split, moistening and fiber thinning, meanwhile, the fiber cell wall displacement and deformation generated, the primary wall and outer wall broken.
Contact Now
Laboratory Turbidimeter SKZ1041AFor measuring suspended in water insoluble particulate matter generated by the degree of light scattering, to get the content of suspended particulate matter. Widely used in power plants, pure water plant, water plants and domestic sewage treatment plants, beverage plants, the environmental protection departments, industrial water, wine industry and the pharmaceutical industry, epidemic prevention departments, hospitals and other departments of the turbidity measurement. Principle:Turbidity, also called turbidity of water or transparent liquid.
Contact Now
Laboratory pulp dehydratorThe effect of the centrifugal force of 1400r/min high speed rotation, in the pulp water out and reached a certain degree of dry, in order to ensure the reliable data. With the use of beating degree tester, it can obtain accurate pulp beating degree and humidity. Parameters:Drum SizeΦ126X100mmDrum capacity1.2LSpeed1400r/minTiming range01s ~ 999.9sPulp dryness20-30%PowerSingle-phase capacitor motor-180W-220VDimension570 × 225 × 460mmWeight30KG
Contact Now
Laboratory PFI Beater For beating test of middle and high concentrations pulps, so that to Analysis of high-grade paper. Principle:Placed the pulps, which is measured having a predetermined concentration, between the knife roller and the beating cylinder, rotating with different circumferential speeds. In order to achieve the purpose of beating pulp. Features:1. Main components made of stainless steel,2. Pulp pool with a knife roller are regulated speeds, belt drive,3. The counter can be set to the number of revolutions dissociation pulp,4.
Contact Now
SKZ1030 Laboratory Flotation CellFlotation deinking method is based on the principle of mine ore, according to the fiber, filler and ink composition of wettable, flotation cell in the 10 to 150 micron ink particles adsorbed on the air bubbles, floating to the surface to remove the pulp, fiber and filler remained in the pulp.It is mainly composed of a flotation tank, the circulation line, paper pulp pump, air bubble generating device, liquid discharging pipe. Parameters:Outfall up and down range of activities0 --100Flow calculation controlYes Tank capacity28 litersTank sizeΦ380 × 380mmTank
Contact Now
Laboratory Pulp Standard Fiber Disintegrator Wet DisintegrationLaboratory Pulp Disintegrator (also known as standard fiber Disintegrator, standard fiber stirrer), Suitable for laboratory wet disintegration of pulp: the disintegration is to separate the interwoven fibersin water after mechanical processing, and meanwhile to maximum remain fiber original structure properties unchanged, in order to ensure the experiment to obtain reliable data, using the original scientific research and production of effective, economy. Standards:ISO5263, JIS-P8220, TAPPI-T205Te
Contact Now
Laboratory Rotary Digester Testing EquipmentFeatures1. Versatility: It is designed for caustic cooking and acid cooking, and can also be used for cooking and bleaching of other liquidswith a work pressure not exceeding 8Kg/cm². This versatility allows it to be used in a wide range of chemical processes.2. Durable Construction: The device is primarily composed of high-quality stainless steel, which ensures high corrosion resistance and longevity.3.
Contact Now
SKZ1031 Laboratory pulp Dewatering dehydrator Tester MachineThe effect of the centrifugal force of 1400r/min high speed rotation, in the pulp water out and reached a certain degree of dry, in order to ensure the reliable data.
Contact Now
This Laboratory Digester used in caustic cooking and acid cooking, It can also be used to cooking and oxygen bleaching for other liquid work pressure is not more than 8Kg / cm2 Structural Features：1.The device is mainly composed of a machine frame, steamer, reducer, heating laps,rolling bearing, no carbon brush and slip ring, and a safety valve, temperature control instrument, a pressure gauge, a needle valve.2.This device part uses the high quality stainless steel , with high corrosion resistance.3.The heating part of the electric heating ring is composed of six pieces, direct
Contact Now
Laboratory Desktop Water Conductivity Meter1. High resolution LCD display, 5.7 inches.2. Multi-reading feature allows auto-read, timed-read and continuous-read.3. Automatic/Manual temperature compensation ensures accurate results.4. Auto-hold feature senses and locks the measurement endpoint.5. Data Storage 500 sets (GLP-compliant).6. Support for USB or RS-232 communication.7. Reset feature automatically resumes all settings back to factory default options.8. Waterproof: IP54.9. 1-3 points calibration with Standard Recognition.10.
Contact Now
Laboratory Paper GSM Tester SKZ114CIt is the sample cutter for the test of all kinds of paper grammage and slice .The cutter conforms to the standard of QB/T1671—98. Technical parameters:Area100Cm2Specimen diameterΦ112.8±0.05mmSpecimen thicknesspaper: 0.1-1.0 (mm), cardboard: single wall <0.6mmDimension 270×260×405 (mm)Weight 15kg Structure and operationStructure: base, rack, gear, rack, upper edge and lower edge, specimen baffles, received board and operating handle.
Contact Now
Laboratory Paper Air Permeability Tester SKZ119The tester is applicable in testing the moderate air permeability of paper between 0 to17μm (Pa.S).
Contact Now
Laboratory Paper Dust Tester SKZ116 The tester is applied to test the dust of paper and cardboard. The parameters and performance conform to the standard of GB/T1541-1989 (Tappi T 437 om-1985) Technical parameters:Light source20W fluorescent lampIrradiation degree60°Working platformefficient area 0.0625 m², rotating 360°Standard dust image0.05-5.0(mm²)Dimension750×350×500 (mm)Weight12.5 kg
Contact Now
EC310F Laboratory Cond Meter Water EC Conductivity Meter GENERAL FEATURES1. LCD display screen, 3.5 inches.2. Multi-reading feature allows auto-read, timed-read and continuous-read.3. Automatic/Manual temperature compensation ensures accurate results.4. Auto-hold feature senses and locks the measurement endpoint.5. Data capacity of up to 500 sets for each parameter (GLP-compliant).6. Support for USB communication.7. Auto-power off feature effectively extends the battery service life.8. Reset feature automatically resumes all settings back to factory default options.9. IP65 waterproof.
Contact Now
The Auto-pneumatic Cutter Press is driven by air pressure only. lt is suitable for laboratory to punch every kind of standard specimens from rubber, plastic, leather Standard: ASTM-D412Technical parameters:TypesPNEUMATICMoving distance25mm～100mmWorking platform320 mm×220 mmSpecimen thicknessmaximum 10mmAir pressure0.6MPaDimension380mm×260mm×590mmNet weight40kg
Contact Now
SKZ1044B Flame Photometer Digital Flame Photometer Flame photometer is a relative measurement of the instrument, the concentration value of the sample under test conditions in the same relative value of the concentration of the standard solution. So before the test, you must first prepare a set of corresponding standard solution.
Contact Now
Laboratory Halogen Moisture Analyzer SKZ111L Quick (1-6 minutes) Determination of moisture of the measured object, using the principle of heating and drying, moisture values measured object is automatically displayed, the data is stable and accurate.Measurement: powder form, granular, paste, liquid, organic and inorganic chemical raw materials, a variety of cereals, grain, seed, feed, starch, food, meat, tobacco, tea, paper, grass, soil, sludge , textiles, fuel, resin, silica, plastic particles, coal, fertilizer, medicine, ceramics, wood, ore.F
Contact Now
Product DescriptionLaboratory Color Assessment Cabinet SKZ199 The Oven is applying in packaging, printing, textile, dye, leather, rubber, paint, ink, chemistry and cloth to test and calibrate the color deflection of products. Can equipped light such as D65, TL8, CWF, U30, UV, F/A as well as D35, D50, D75 etc Feature 1.Separately recorded the time each light source requested.2.With a touch switch, all Micro-control, long-term trouble-free operation.3.Automatically switch multiple light, easy to test metamerism effect.4.Absorption-type panel in gray, consistent with the inter
Contact Now
Fiber Classifier (Bauer Fiber Classifier) is the equipment used for measuring the weight-average fiber length of pulp fiber according to screening method by pulp and paper-making laboratory. Principle:Screening the pulp suspension into the vessel, the vessel is charged with mesh sieve, Container into a ladder type, the pulp suspension flows from one container to another container, in various different sieve to retain the fiber length pulp, retention of pulp fiber length and the sieve mesh size.
Contact Now
SKZ1041B Laboratory TurbidimeterFor measuring suspended in water insoluble particulate count generated via the diploma of mild scattering, to get the content material of suspended particulate matter. Widely used in energy plants, pure water plant, water plant life and home sewage therapy plants, beverage plants, the environmental safety departments, industrial water, wine enterprise and the pharmaceutical industry, epidemic prevention departments, hospitals and different
Contact Now
Helium gas detectorThe main purpose of helium gas detectors is to detect the concentration of helium gas in industrial production processes to ensure the safety and stability of the production environment. Meanwhile, it can also be used in laboratory research and testing to ensure the accuracy and reliability of experimental results.
Contact Now
