Laboratory Paper GSM Tester SKZ114CIt is the sample cutter for the test of all kinds of paper grammage and slice .The cutter conforms to the standard of QB/T1671—98. Technical parameters:Area100Cm2Specimen diameterΦ112.8±0.05mmSpecimen thicknesspaper: 0.1-1.0 (mm), cardboard: single wall <0.6mmDimension 270×260×405 (mm)Weight 15kg Structure and operationStructure: base, rack, gear, rack, upper edge and lower edge, specimen baffles, received board and operating handle.
Contact Now
Laboratory Paper Dust Tester SKZ116 The tester is applied to test the dust of paper and cardboard. The parameters and performance conform to the standard of GB/T1541-1989 (Tappi T 437 om-1985) Technical parameters:Light source20W fluorescent lampIrradiation degree60°Working platformefficient area 0.0625 m², rotating 360°Standard dust image0.05-5.0(mm²)Dimension750×350×500 (mm)Weight12.5 kg
Contact Now
Laboratory Paper Air Permeability Tester SKZ119The tester is applicable in testing the moderate air permeability of paper between 0 to17μm (Pa.S).
Contact Now
Laboratory Pulp AquapulperFunctions:1. Laboratory for virgin pulp or recycled pulp to beating, disintegration and deinking.2. Major laboratory equipment used to process pulp, broke, and waste paper.3. Assessment recycled pulp process, additives and quality 4.
Contact Now
Laboratory Pulp Disintegrator (also known as standard fiber Disintegrator, standard fiber stirrer), Suitable for laboratory wet disintegration of pulp: the disintegration is to separate the interwoven fibers in water after mechanical processing, and meanwhile to maximum remain fiber original structure properties unchanged, in order to ensure the experiment to obtain reliable data, using the original scientific research and production of effective, economy. Standards:ISO5263, JIS-P8220, TAPPI-T205
Contact Now
Designed according to GB/T1540-1989, ISO535 (Cobb paper and cardboard absorbency method), which is used to test the absorbency of paper and cardboard, but not applied to evaluate the writing capability of paper and cardboard.Technical parameters:Metal cylinder inside area100±0.2cm², height: 50mmAbsorbency paper200~250g/m²Absorbency speed75mm/10minSmooth metal rollerwidth:200±0.5mm, weight:10±0.5kgDimension390×280×410 (mm)Weight 25kgOptional Balance: accuracy 0.001g, measure range 500gStopwatch: 1sGlass graduate: 100ml Cobb sample cutter
Contact Now
Digital Paper Thickness Tester SKZ106AThe tester is applying to test the thickness of paper and cardboard. Standard:ISO534: Paper and board -Determination of thickness, density and specific volumeISO 438:1980. Paper -- Determination of bulking thickness and apparent densityGB/T451.3: paper and board-Determination of thicknessTechnical Parameters:Measure range0-6mmIndicator display range0-12.7mmAccuracy0.001mm or 0.01mm (paper board)Measuring area200mm²Pressure100 KpaValue error±2.5um or ±0.5%Dimension80×120×120 (mm)Weight5kg
Contact Now
SKZ1031 Laboratory pulp Dewatering dehydrator Tester MachineThe effect of the centrifugal force of 1400r/min high speed rotation, in the pulp water out and reached a certain degree of dry, in order to ensure the reliable data.
Contact Now
Laboratory PFI Beater For beating test of middle and high concentrations pulps, so that to Analysis of high-grade paper. Principle:Placed the pulps, which is measured having a predetermined concentration, between the knife roller and the beating cylinder, rotating with different circumferential speeds. In order to achieve the purpose of beating pulp. Features:1. Main components made of stainless steel,2. Pulp pool with a knife roller are regulated speeds, belt drive,3. The counter can be set to the number of revolutions dissociation pulp,4.
Contact Now
SKZ1030 Laboratory Flotation CellFlotation deinking method is based on the principle of mine ore, according to the fiber, filler and ink composition of wettable, flotation cell in the 10 to 150 micron ink particles adsorbed on the air bubbles, floating to the surface to remove the pulp, fiber and filler remained in the pulp.It is mainly composed of a flotation tank, the circulation line, paper pulp pump, air bubble generating device, liquid discharging pipe. Parameters:Outfall up and down range of activities0 --100Flow calculation controlYes Tank capacity28 litersTank sizeΦ380 × 380mmTank
Contact Now
Air Permeability Tester For Paper SKZ119 The tester is designed to assess the moderate air permeability of paper within the range of 0 to 17μm (Pa.S), in accordance with the ISO 5636-2:1984 standardfor determining air permeance using the Schopper method.SpecificationTesting range0-17μm/(Pa.S)Pressure area10.0±0.05cm²Pressure error1.00±0.01kPaSample size60×100 (mm)Dimension350×250×1160 (mm)Weight21.5kgConstant pressure difference is 1Kpa Airflow (ml/s) Test lasting time (S) Measured volume (ml) 0.13—0.33 &nb
Contact Now
Auto Paper Tensile Tester SKZ101AIt is used to test the Tensile strength test of paper and board, It adopts precise auto control and data acquisition system. Feature 1) Color touch screen display.2)The test force can be adjusted in a wide range, stable and effectively.3) Display test force, test speed and displacement at real time.4) It can automatically return to the original position after test.5) With limit position protection, over load protection and over current protect.6).
Contact Now
Laboratory pulp dehydratorThe effect of the centrifugal force of 1400r/min high speed rotation, in the pulp water out and reached a certain degree of dry, in order to ensure the reliable data. With the use of beating degree tester, it can obtain accurate pulp beating degree and humidity. Parameters:Drum SizeΦ126X100mmDrum capacity1.2LSpeed1400r/minTiming range01s ~ 999.9sPulp dryness20-30%PowerSingle-phase capacitor motor-180W-220VDimension570 × 225 × 460mmWeight30KG
Contact Now
SKZ1027A/B/C/D Laboratory Valley Pulp BeaterLaboratory Valley pulp Beater, mechanical forces generated by the roll and the bottom knife, the fiber pulp was cutting, crushing, kneading, split, moistening and fiber thinning, meanwhile, the fiber cell wall displacement and deformation generated, the primary wall and outer wall broken.
Contact Now
Laboratory Turbidimeter SKZ1041AFor measuring suspended in water insoluble particulate matter generated by the degree of light scattering, to get the content of suspended particulate matter. Widely used in power plants, pure water plant, water plants and domestic sewage treatment plants, beverage plants, the environmental protection departments, industrial water, wine industry and the pharmaceutical industry, epidemic prevention departments, hospitals and other departments of the turbidity measurement. Principle:Turbidity, also called turbidity of water or transparent liquid.
Contact Now
SKZ107A Elmendorf Tear TesterIt is a specialized tool used to measure the strength of paper tears.
Contact Now
SKZ108C Bursting Strength Of PaperApplicationUsed to detect a range of paper products and thin cardboard layers with a maximum density of 2000 kpa. It may also be used to detect different types of single and multi-layer cardboard, corrugated cardboard, silk cotton, and other non-paper items.StandardsISO2759, ISO 2758. PrincipleIt uses a button for signal transmission.
Contact Now
High Quality Paper Smoothness Meter SKZ104BBekk Smoothness tester is designed according to the Bekk type smoothness principle. Equipped with high-precision sensor and imported oil-free vacuum pump.Standards: ISO 5627 Main Features1.Imported oil-free vacuum pump.2.Fast measurement: with small volume chamber measurement, which measurement time is only one-tenth of a large one, saving time in measurement.
Contact Now
Burst tester is the basic instrument for testing the anti-bursting degree of paper or cardboard, using Mullen test methods. ApplicationUsed to determine a variety of paper and not more than 2000kpa monolayer of thin cardboard, or a variety of single and multi-layer cardboard and corrugated cardboard can also be used to detect silk cotton and other non-paper products.StandardsISO 2759, ISO 2758. PrincipleIt adopts signal transmitting press.
Contact Now
Burst tester is the simple instrument for checking out the anti-bursting diploma of paper or cardboard, the usage of Mullen check methods. ApplicationIt is used to decide a range of paper and no longer extra than 2000kpa monolayer of skinny cardboard, or a range of single and multi-layer cardboard and corrugated cardboard can additionally be used to notice silk cotton and different non-paper products. StandardsISO2759, ISO 2758. PrincipleIt adopt
Contact Now
High Quality Concora Medium Fluter (CCT, CMT) SKZ113To determinate of flat crush strength of corrugated paper when pressed standard waveform (i.e., from the flute corrugated base paper), comply with standard: ISO7263-1985: corrugating medium – Determination of flat crush resistance after laboratory fluting.Feature: 1.Using single-chip microprocessor control technology, Precision temperature controller
Contact Now
This Laboratory Digester used in caustic cooking and acid cooking, It can also be used to cooking and oxygen bleaching for other liquid work pressure is not more than 8Kg / cm2 Structural Features：1.The device is mainly composed of a machine frame, steamer, reducer, heating laps,rolling bearing, no carbon brush and slip ring, and a safety valve, temperature control instrument, a pressure gauge, a needle valve.2.This device part uses the high quality stainless steel , with high corrosion resistance.3.The heating part of the electric heating ring is composed of six pieces, direct
Contact Now
Laboratory Rotary Digester Testing EquipmentFeatures1. Versatility: It is designed for caustic cooking and acid cooking, and can also be used for cooking and bleaching of other liquidswith a work pressure not exceeding 8Kg/cm². This versatility allows it to be used in a wide range of chemical processes.2. Durable Construction: The device is primarily composed of high-quality stainless steel, which ensures high corrosion resistance and longevity.3.
Contact Now
Laboratory Pulp Standard Fiber Disintegrator Wet DisintegrationLaboratory Pulp Disintegrator (also known as standard fiber Disintegrator, standard fiber stirrer), Suitable for laboratory wet disintegration of pulp: the disintegration is to separate the interwoven fibersin water after mechanical processing, and meanwhile to maximum remain fiber original structure properties unchanged, in order to ensure the experiment to obtain reliable data, using the original scientific research and production of effective, economy. Standards:ISO5263, JIS-P8220, TAPPI-T205Te
Contact Now
