Product DescriptionLab Manual Yarn Twist Tester SKZ192C Used for testing the twist nonhmogeneitiy, the twist unevenness, and the twist shrinkage of various yarns and for product quality inspection to eliminate problems in the process.Standards: GB/T2543.1/2 FZ/T10001 ISO2061 ASTM D1422 JIS L1095Features:1. Driving form: By hand operating.2.
Contact Now
Products DescriptionHot Selling Yarn Length Tester SKZ193BApplications:By the winder, the sample yarn on the through tube can be winded into skein
yarns with a reel and the reeling tension be measured. It is used to measure a yarn
length, designed for yarn linear density (or count) measurement and skein yarn
strength test. Standard:ISO 2060.2, ISO2060, ASTM D1907, GB4743- 95Features: 1.Timing cog belt of direct transmission, no-lap skid. 2.Countint by optocoupler.
Contact Now
SKZ101-16C Single Yarn Strength TesterFor a variety of fiber and metal filaments dry (wet) tensile test.Standards:ISO5079 , ISO11566Maximum load test200cN, test error: 0.2% (F.S), sensitivity: 0.01cNElongation range≤100mm, Resolution: 0.01mmTest speed1 ~ 200mm / minTest MethodBuilt-in 3 kindsClamping distance10 mm, 20 mmOutputliquid crystal display, print outputPowerAC220V ± 10% 50Hz 100WDimensions1000 × 420 × 460mmWeight30Kg
Contact Now
Lab-Potcher is used to simulate the production process of rinsing pulp, can accomplish the process of pulp un-bleached washing, bleaching pulp, pulp bleached process.
Contact Now
SKZ1015 Lab Drying OvenThe drying oven can provide drying, baking, sterilization and heat treatment. Stainless steel tank and digital display, its working temperature can reach to the highest point from room temperature, which can also be adjusted arbitrarily. Technical parameters:voltage220V 50HzTemperature control rangeRT+10℃～250℃Temperature resolution0.1℃Constant temperature fluctuation±1℃input power1120WWorking temperature5℃～40℃Liner size (mm)420×400×345Dimensions (mm)720×580×530Load carrier (standard)2pcsTiming range1～9999 minutes
Contact Now
Lab PH Ion Tester I310TPRODUCT SPECIFICATIONSModelI310TParameterspH/ISE/Temp.(mV/pX)pHRange-2.00 to 20.00pHResolution0.1, 0.01 pHAccuracy±0.01 pHCalibration PointsUp to 5Standard CustomizationYesStandard RecognitionNIST, GB, USA and DIN buffersSlope LimitYesmV/ORPRange-2000.0 to 2000.0 mVResolution0.1 mVAccuracy±0.3 mV or ±0.1%pXRange-2.00 to 20.00 pXResolution0.1, 0.01 pXAccuracy±0.02 pXCalibration PointsUp to 5ISERange1.000e-9 to 9.999e+9Unitsmol/L, mmol/L, g/L, mg/L, μg/L, ppm, ppbResolutionUp to 4 significant digitsAccuracy±0.5%Calibration PointsUp to 5TemperatureRange-5 to 110 ºC, 23 to 2
Contact Now
Lab Fabric Formaldehyde TesterFor te speedy dedication of formaldehyde content material in textiles, by using Extraction method. Standards: SN/T2195 ISO14184-1, LAW 112Features of SKZ190BCan be managed by wayh of LCD show or PC Automatic spectrum records processing, record printing. With feature of absorption curve, chosen wavelength, absorbance and transmittance. Spectrophotometer, automated test, three samples in one time Automatic calibration of 100%T and 0%TTechnical parametersPacking and DeliveryCompany ProfileCertification
Contact Now
Lab Perspiration Fastness Tester Perspirometer SKZ158 Application:Used for testing the color fastness to perspiration of all textiles and the performance of the color fastness to water, sea water and saliva of all be painted and colored textiles.Standards: Sweat-resistance: GB/T3922, AATCC15, ISO105 Seawater-resistance: GB/T5714, AATAA107, ISO105 Distilled water-resistance: GB/T5713, AATCC106, ISO105Principle About AATCC15: Colored specimens and other fibrous materials (for staining) are joined, immersed in a simulated acidic perspiration solution, subjected to a fixed mechani
Contact Now
Lab Vibration Tester SKZ126AThis tester is applicable to toys, electronics, furniture, gifts, ceramics, packaging and other products to simulate transport tests, accords with the U.S.
Contact Now
SKZ-SY3020 Spectrophotometers 1. 400-700nm, full-band balanced LED ligh source 2. High precision: 0.01, accurate measurement 3. Manual input LAB value 4. Measuring aperture: 4mm or 8mm optional 5. Accurate results, one second measurement 6. All kinds of specimens can be tested 7. Multiple measurement modes available 8.
Contact Now
Lab Textile Ironing Sublimation Color Fastness TesterFeatures and ApplicationsThe instrument is used for the test of fabric color fastness to dyeing, chlorine damage (for resin finished fabrics), bleached cloth yellowness, dispersed dyestuff sublimation fastness and reactive dyestuff water ironing fastness. It is a ideal tester for dyestuff production and dyeing-finishing process in the light and textile industry.
Contact Now
SKZ111A-1 Yarn cotton Moisture MeterSuitable for measuring cotton yarn and wool yarnMEASURE RANGE: 0-90%RESOLUTION: 0.1%PINS LENGTH: 600MMLCD DIGITAL DISPLAYPACKING AND TRANSPORTATIONevery details will be checked to assure the productUPS,FedEx Express,TNT,EMS,aramex,DHL WORLDWIDE EXPRESSCompany ProfileSKZ Moisture meter is a high precision moisture measuring instrument based on advanced technology, which is widely used in various industries. The moisture meter has the following features:1.
Contact Now
FEATURESColor High contrast LCD touchscreen, 4.3 inches.Intelligent operation system provides features including user management, calibration management, electrode management, method management, data management, Log Management and etc. Multi-reading feature allows auto-read, timed-read and continuous-read. Automatic/Manual temperature compensation ensures accurate results.
Contact Now
DO400F dissolved oxygen testerGENERAL FEATURESHigh resolution LCD display, 5.7 inches.Multi-reading feature allows auto-read, timed-read and continuous-read. Automatic/Manual temperature compensation ensures accurate results.
Contact Now
Lab LED ISO 7027 Water Turbidity Meter Turbidimeter Turbidity Measurement Tester TU200GENERAL FEATURES1. 850nm LED light Source.2. Uses Nephelometric principle with 90° detection.3. Meets ISO 7027 and offers consistent light source for higher accuracy.4. Selectable turbidity units, including the NTU, FNU and EBC.5. Settable parameters, including user ID, number of calibration points, data and time, etc.6.
Contact Now
Lab Fabric Martindale Abrasion And Pilling Tester SKZ165A Used for testing the performance of the wearing resistance, abrasion, appearance change (pilling degree/class) of the textiles and membrane materials.Standards:ASTM D4970,ASTM D4966,ISO12947,JIS L1096,TM112 M&S, FZ/T20020,IWS TM196,ASTM D3886,DIN53863/53865, BS3424/5690,BS EN 388/530,ISO12945-2Test mode: Mode l: Circular specimen with the same material fabric at a given pressure, friction with the Lissajous graphic motion trajectory, can achieve the required speed, evaluating sample pilling.
Contact Now
Lab Karl Fischer Coulometer Titrator KFT-20VGENERAL FEATURES1. LCD display screen.2. Generator cell with diaphragm.3. Selectable units including μg, mg, %, mg/L, g/L, etc.4. Settable parameters, including measurement unit, polarization current, generator current, endpoint potential, stop criterion and etc.5. Data can be stored and easily transferred to printer via RS-232 communication interface.6. Reset feature automatically resumes all settings back to factory default options.Includes1. JB-11 stirrer2. Electrolysis electrode3.
Contact Now
SKZ1016-1 Cap Torque TesterMeasuring bottled products locking and opening torque values. High accuracy, good stability.Features:1. Microcomputer control2. Test data: continuous acquisition or automatically to maintain peak3. Dual-mode design: locking force, opening force4. Test results using the standard unit, without manual conversion5. Intelligent fault indications, overload protection6. Compact, easy to operate, reliable performanceTechnical parameters:Accuracy1gradeSystem Resolution0.01NmClamping rangeΦ15mm ~ Φ160mmMeasuring range0 - 5N.
Contact Now
Used to test the product packaging by the fall of the damage, and assessment of transport handling process, impact resistance, mainly to meet the product packaging to withstand the conditions of transport capacity, so as to improve and perfect the packaging design. Standard: ISO2248, JISZ0202-87 Features:1 single wing drop tester to do free drop test of the package surface, angle, edge, with digital height indicator and height tracking decoder, which can accurately give the product drop height, and the pre-set drop height error of less than 2%, or 10 mm.2 single wing drop test machin
Contact Now
SKZ111C-1 Lab Fine Noodles Fettuccine Dried Moisture MeterRapid determination of moisture content of the fine dried noodles, the noodles. DIGIT LCD DIGITAL DISPLAYMEASURING RANGE:0-80%PACKING AND TRANSPORTATIONevery details will be checked to assure the productUPS,FedEx Express,TNT,EMS,aramex,DHL WORLDWIDE EXPRESSAbout SKZSKZ Industrial Co. Limited and SKZ International Co., LTD are part of the SKZ group.
Contact Now
Product DescriptionLab Mace Snagging Tester SKZ168 To determine the snagging resistance of fabrics by Mace test method.Standards: GB/T11047-89, ASTMD3939, JISL1058Features:1. 4 testing positions for fast test, time-saving and stability.2. Digital display, rotary motor, chain wheel, aluminum alloy drum, mace, fixed guide rod, adjusting guide rod and counter on the control panel.3.
Contact Now
Product DescriptionLab Benchtop Water Ph Meter Pool Ph Tester PH500T Features:1. Color high contrast LCD touch screen, 7.0 inches.2. Intelligent operating system provides user management, calibration management, method management, data management and other functions.3. Multi-reading function allows automatic, timed and continuous reading.4. Automatic/manual temperature compensation ensures accurate results. 5. 1000 sets of data can be stored for each parameter (GLP compliant). 6. Data analysis function helps users to view, compare and recalculate results. 7.
Contact Now
SKZ1060 Lab Synchronous Thermal AnalyzerSimultaneous thermal Analyzer STA is a mixture of differential heating and thermo gravimetric .
Contact Now
Product DescriptionLaboratory Air Permeability Tester For TextileFor measuring the air permeability of a variety of textile fabrics, including industrial fabrics, nonwovens and other textile products and other breathable materials.Standards:GB/T 5453、GB/T 13764、ISO 9237、ASTM D737Feature:1. Automatic clamping, automatic nozzle replacement, quick test.2. Microcomputer processing, test results directly, without manual calculation.3. Chinese and English touch screen menu operation, configured with computer interface.4.
Contact Now
