ISO1133 Manufacture Auto LCD Melt Flow Indexer Factory Melt Flow Indexer-manufacture,factory,supplier from China

LCD Melt Flow Indexer MRF MVR Meter ISO1133 400degree MFI EquipmentStandards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics —Part 1:Standard methodISO 1133-2:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics —Part 2: Method for materials sensitive to time temperature history and/or moistureGBT 3682.1-2018 "Plastic Thermoplastic Melt Mass Flow Rate (MFR) and Melt Volume Flow Rate (MVR) Determination"ASTM D1238-2013 "Standard Test Method

To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(cm3/10min) and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, polypropylene, ABS resin and poly-formaldehyde resin, etc, whose melt temperature are lower, widely applied to the fields of plastics materials, product, petrochemical.Standards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplas

SKZ145A Melt Flow Indexer PlastometerTechnical parameters:Test methodMFR (unit: g / 10min)Temperature rangeroom temperature ~ 300 ℃Temperature accuracy± 0.5 ℃Temperature Resolution0.1 ℃Measuring range0.1 ~ 300g / 10min (MFR)load3.187 ~ 211.82N is divided into eightBarrel diameterф9.55mm ± 0.025mmDie apertureΦ2.095 ± 0.005mmPowerAC220V±10%  50Hz 1kWDimension300mm×400mm×500mmWeight35kg ABOUT USSKZ Industrial Co., Limited and SKZ International Co., Limited are the individuals of SKZ, which are specialised in furnish rubber trying out machine.SKZ&n

SKZ145 ISO1133 Manufacture Auto LCD Melt Flow Indexer Factory Melt Flow IndexerStandards:ISO 1133-1:2011 Plastics — Determination of the soften mass-flow price (MFR) and soften volume-flow price (MVR) of thermoplastics —Part 1:Standard methodISO 1133-2:2011 Plastics — Determination of the soften mass-flow charge (MFR) and soften volume-flow charge (MVR) of thermoplastics —Part 2: Method for substances touchy to time temperature records and/or moistureASTM D1238-2013 "Standard Test Meth

Standard: ISO1133 Feature:1. LCD display, time, temperature and sample times can be set.2. Built-in printer 3. Automatic cutting4. MFR test item  Technical parameters:Test methodMFR (unit: g / 10min)Temperature rangeroom temperature ~ 300 ℃Temperature accuracy± 0.5 ℃Temperature Resolution0.1 ℃Measuring range0.1 ~ 300g / 10min (MFR)load3.187 ~ 211.82N is divided into eightBarrel diameterф9.55mm ± 0.025mmDie apertureΦ2.095 ± 0.005mmPowerAC220V±10%  50Hz 1kWDimension300mm×400mm×500mmWeight 35kg 

SKZ145A Melt Flow Indexer MFR instrumentTechnical parameters:Test methodMFR (unit: g / 10min)Temperature rangeroom temperature ~ 300 ℃Temperature accuracy± 0.5 ℃Temperature Resolution0.1 ℃Measuring range0.1 ~ 300g / 10min (MFR)load3.187 ~ 211.82N is divided into eightBarrel diameterф9.55mm ± 0.025mmDie apertureΦ2.095 ± 0.005mmPowerAC220V±10%  50Hz 1kWDimension300mm×400mm×500mmWeight35kg ABOUT USSKZ Industrial Co., Limited and SKZ International Co., Limited are the humans of SKZ, which are specialised in furnish rubber attempting out machine.SKZ installed 

SKZ145 Melt Flow Rate TesterMelt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin must be determined for engineering plastics, which have higher melt temperatures, such as polycarbonate, nylon, and fluorine plastics; and for fit for plastics tests, which have lower melt temperatures, such as polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Product features:1.The control sy

SKZ145 Melt Index Tester Mfi TesterFor engineering plastics such as polycarbonate, nylon, and fluorine plastics, whose melt temperatures are higher, as well as fit for plastics tests of polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc., whose melt temperatures are lower, the following parameters must be determined: melt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Char

SKZ1052C-1L Differential Scanning Calorimeter360° lab and factory: https://skztester.en.alibaba.com/company_profile.html?spm=a2700.shop_oth.8.9DSC Video: https://youtu.be/m9z9fUnwLvg DSC is designed to determine the inner heat transition relating to temperature and heat flow, it is widely used in the field of polymer development, performance testing & quality control.

DO400F dissolved oxygen testerGENERAL FEATURESHigh resolution LCD display, 5.7 inches.Multi-reading feature allows auto-read, timed-read and continuous-read. Automatic/Manual temperature compensation ensures accurate results.

NTV-AI High temperature ViscometerThe viscometer is used to measure the absolute viscosity of Newtonian fluid and non-Newtonian fluids the apparent viscosity, a measure of sensitivity, the test results are reliable, easy to operate, nice shape, can be widely used for Hot melt adhesive, asphalt, paraffin waxFeatures:1. The 7-inch large intelligent touch operation, the operation is simple and convenient, and it can display the dynamic viscosity value, the kinematic viscosity value, and the viscosity-temperature curve.2.

M500T Features:Color High contrast LCD touchscreen, 7.0 inches.Intelligent operation system provides features including user management, calibration management, method management, data management and etc. Multi-reading feature allows auto-read, timed-read and continuous-read. Automatic/Manual temperature compensation ensures accurate results. Data Storage 1000 sets for each parameter (GLP-compliant).Data analysis feature helps user review, compare and recalculate results.Support for USB or RS-232 communication.Reset feature automatically resumes all settings back to factory

SKZ1037C/D High Accuracy Digital Rotatory Auto Viscometer MachineFeatures:1. Advanced mechanical design technology, manufacturing technology and microcomputer control technology, accurate data acquisition2. High subdivision drive stepper motor rotation smooth and precise. Choose white backlit display, high brightness LCD display, the data show clearly3. Can display viscosity, speed, sample liquid temperature, percent, rotor number, and the selection of the rotor speed can be measured current maximum range value4.

Product Introduction★ Flexible and flexible pumping system.The gas sampling pump's flow rate can be adjusted in ten increments to personalize the detection flow for varied settings.★ Multi-layered filter.The three-layer filter unit efficiently filters oil, water, dust, and other pollutants.

PH110B pH MeterFeatures:The screen is 3.5 inches and is LCD.The "Reset" feature automatically returns all settings to their original factory settings.The battery service life is significantly increased by the auto-power-off feature.IP65 water resistance.

FEATURESColor High contrast LCD touchscreen, 4.3 inches.Intelligent operation system provides features including user management, calibration management, electrode management, method management, data management, Log Management and etc. Multi-reading feature allows auto-read, timed-read and continuous-read. Automatic/Manual temperature compensation ensures accurate results.

PH310F pH MeterFeatures:LCD display screen, 3.5 inches.Multi-reading feature allows auto-read, timed-read and continuous-read. Automatic/Manual temperature compensation ensures accurate results. Auto-hold feature senses and locks the measurement endpoint.Data capacity of up to 500 sets for each parameter (GLP-compliant).Support for USB communication.Auto-power off feature effectively extends the battery service life.Reset feature automatically resumes all settings back to factory default options.IP65 waterproof.

Product descriptionThe SKZ1050E portable multi-gas detector is an upgraded version of the SKZ1050 that offers advanced features and functionalities for gas detection and monitoring.    SpecificationsGas DetectedAs request (customize)Detection principleInfrared principles/ Electrochemistry principles/Catalytic combustion principles/Thermal Conduction Principle/Photoionization principlesSampling methodBuilt-in stable flow pump, each flow pump is equipped in each  independent module, pump flow is adjustable in ten steps, flow range: 0-500 mL/MinModular structure

Laboratory Desktop Water Conductivity Meter1. High resolution LCD display, 5.7 inches.2. Multi-reading feature allows auto-read, timed-read and continuous-read.3. Automatic/Manual temperature compensation ensures accurate results.4. Auto-hold feature senses and locks the measurement endpoint.5. Data Storage 500 sets (GLP-compliant).6. Support for USB or RS-232 communication.7. Reset feature automatically resumes all settings back to factory default options.8. Waterproof: IP54.9. 1-3 points calibration with Standard Recognition.10.

DSC Differential Scanning Calorimeter SKZ1052Product descriptionDSC is designed to determine the inner heat transition relating to temperature and heat flow, it is widely used in the field of polymer development, performance testing & quality control.

SKZ129A Auto Akron Abrasion TesterStandard ISO:4661-1:1993, ISO 2481:1988, ISO 471:1983, ISO 1826:1981Technical parameters:Tire suffered force26.7N (2.7kgf)Tire axis rotary speed76±2r/minWheel axis speed33-35r/minAngle between the two axis0°~45°PowerAC220V±10%Dimension600×480×400 (mm)Weight60kgProducts DescriptionSKZ129AAkron Abrasion TesterIS0:4661-1:1993I50 2481:1988IS0 471:1983I50 1826:1981The Angle between therubber wheel shaft and thegrinding wheel can beadjusted to 15°or 25°Stable base, solid structure.durable and not easy to breakHigh quality digital display,display the number of wearre

SKZ1043B LCD Potentiometric Titration MeterFeatures: 1. The compact designed integrated titrator and convenient automatic titration system   a). Burette valve integrated design, easy to replace, avoid different titration, mutual interference of different solutions   b). Automatic identification pH standard solution group (standard solution group 1:4.00 pH, 6.86pH, 9.18pH; standard solution group 2:3.78 pH, 7.00pH, 10.01pH), supports manually identify   c).

Digital Ph Tester PH310TProduct Features1. Color High contrast LCD touchscreen, 4.3 inches.2. Multi-reading feature allows auto-read, timed-read and continuous-read.3. Automatic/Manual temperature compensation ensures accurate results.4. Auto-hold feature senses and locks the measurement endpoint.5. Data capacity of up to 500 sets for each parameter (GLP-compliant).6. Support for USB communication.7. Auto-power off feature effectively extends the battery service life.8. Reset feature automatically resumes all settings back to factory default options.9. IP65 waterproof.

Digital Ion Tester Ph Meter I310TGENERAL FEATURES1. Color High contrast LCD touchscreen, 4.3 inches.2. Multi-reading feature allows auto-read, timed-read and continuous-read.3. Automatic/Manual temperature compensation ensures accurate results.4. Auto-hold feature senses and locks the measurement endpoint.5. Data capacity of up to 500 sets for each parameter (GLP-compliant).6. Support for USB communication.7. Auto-power off feature effectively extends the battery service life.8. Reset feature automatically resumes all settings back to factory default options.9. IP65 waterproof.