SKZ190B Fabric Formaldehyde TesterFor the fast dedication of formaldehyde content material in textiles, through Extraction method.Feature:1.Can be managed through LCD show or PC2.Automatic spectrum facts processing, report printing.4. Spectrophotometer, computerized test, three samples in one time5.
Contact Now
Product DescriptionBenchtop Fabric Formaldehyde Tester SKZ190B For the rapid determination of formaldehyde content in textiles, by Extraction method.Standards: SN/T2195, ISO14184-1, LAW 112Features:1.Can be controlled by LCD display or PC.2.Automatic spectrum data processing, report printing.3. With function of absorption curve, selected wavelength, absorbance and transmittance.4. Spectrophotometer, automatic test, three samples in one time.5.
Contact Now
Lab Fabric Formaldehyde TesterFor te speedy dedication of formaldehyde content material in textiles, by using Extraction method. Standards: SN/T2195 ISO14184-1, LAW 112Features of SKZ190BCan be managed by wayh of LCD show or PC Automatic spectrum records processing, record printing. With feature of absorption curve, chosen wavelength, absorbance and transmittance. Spectrophotometer, automated test, three samples in one time Automatic calibration of 100%T and 0%TTechnical parametersPacking and DeliveryCompany ProfileCertification
Contact Now
SKZ1050B Fixed HCHO Monitor Gas Detection Equipment 0-100PPM Formaldehyde CH2O Fixed Gas DetectorFunction 1.Environmental monitoring or GAS pipeline concentration and alarm2.Temperature compensation can be used to create the ideal conditions for varying gas concentration temperatures. 3.It is possible to remotely control infrared devices without having to open the alarm set point, zero calibration, change the address, or do other tasks. SpecificationsGas DetectedCH2ODetection principleElectrochemical principlesSampling MethodWall-mounted, pipeline, flow typeMeasure Range0-1
Contact Now
SKZ145 Melt Index Tester Mfi TesterFor engineering plastics such as polycarbonate, nylon, and fluorine plastics, whose melt temperatures are higher, as well as fit for plastics tests of polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc., whose melt temperatures are lower, the following parameters must be determined: melt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Char
Contact Now
SKZ145 Melt Flow Rate TesterMelt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin must be determined for engineering plastics, which have higher melt temperatures, such as polycarbonate, nylon, and fluorine plastics; and for fit for plastics tests, which have lower melt temperatures, such as polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Product features:1.The control sy
Contact Now
To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(cm3/10min) and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, polypropylene, ABS resin and poly-formaldehyde resin, etc, whose melt temperature are lower, widely applied to the fields of plastics materials, product, petrochemical.Standards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplas
Contact Now
SKZ1043B Automatic Potentiometric TitratorApplication: Widely used in food additives, food safety, pharmaceutical production, petrochemical, quality control, research institutionsTypical titration applications:Acid-base titrationDrugs in amino acids, benzo thiazideOil of total acid TBNRedox TitrationFoods iodine value, peroxide value, vitamin CWater treatment chemical oxygen demand CODPrecipitation titrationChloride titration, Pb2 +Complexometric titrationCalcium, Zinc ion titration, formaldehyde titration Non-aqueous titrationPerchloric acid titrat
Contact Now
Product feature displayThe formaldehyde gas detector (SKZ1050-CH2O) is a device specially used to detect formaldehyde concentration. It is very suitable for use in disinfection residues in pharmaceutical factories, leather factories and furniture factories, etc. It can help monitor and ensure the safety of the work environment and protect employee health.FunctionThe device described appears to be a gas detector or gas monitor. It is designed to monitor gas concentrations in an environment or confined space and sound an alarm when the concentration exceeds a certain level.
Contact Now
SKZ144 Rubber Vicat Softening Point Tester used to calculate the Vicat softening and heat distortion temperatures of polymer materialsCharacteristic1.Using a temperature controller to set the temperature and a meter to measure distortion.2.
Contact Now
IGT Printability Tester SKZ1032Printability Tester is a most basic designed for paper and paperboard printing picking printability test development of computer process control apparatus. Applicable to all kinds of offset, letterpress and gravure paper and cardboard printing simulation test. Equipped with a high speed ink refilling equipment, a standard scale, aluminum printing plates, wrapping paper.StandardsISO3782, GB/T2679.15, QB/T1058,TAPPI 514 and 575, SCAN P 63:90 Feature: ① the control system accurate.
Contact Now
New Schopper-riegler Beating Pulp Tester SKZ115The instrument is applicable in testing all kinds of suspending pulp liquid that less than 100°SR--- Schopper-Riegler.Standards:QB/T1054-98, GB/T3332-1982 and ISO5267/1.Feature: 1. hydraulic pressure structure with stainless steel 2. confirms to Standard ISO 3332-1982 and ISO5267/13. filters’s material is phosphor bronze, with its working area 100cm2 Technical parameters:Range0-100°SRMinimum scale1°SRTemperature of distilled water20±0.5 ℃Volume of distilled water1000 mlDraining time149±1 sDimension460×250 (mm)Weight 35kg
Contact Now
Schopper-Riegler Beating Freeness Tester MachineStandards:QB/T1054-98, GB/T3332-1982 and ISO5267/1.Feature:1. hydraulic pressure structure with stainless steel2. confirms to Standard ISO 3332-1982 and ISO5267/13.
Contact Now
Five-point heat-seal Tester (also known as gradient heat seal tester) can be used to determine the heat sealing temperature range , suitable packaging speed, and heat sealing pressure of the plastic film substrate, the flexible packaging composite film, coated paper and other heat sealing composite membrane. It can also work with tensile tester to do heat seal strength test. Structure: Divided into four parts of the air drive system, heat sealing device, temperature control system, time-conditioning systems. 1).
Contact Now
Hot Selling Ultraviolet Protection Tester For testing textiles UV transmittance and UV protection performance, can be directly measured ultraviolet protection factor UVA, UVB, UPF.Standards AATCC 183, AS/NZS 4399, BS 7914 PREN13758.Feature 1. HERAEUS deuterium lamp2. Ultraviolet photoelectric sensor, can measure the fluorescent sample.3.
Contact Now
SKZ128A Durometer Hardness Tester For RubberA shore hardness tester is used to determine the hardness of vulcanized rubber and plastic.The hardness head has been mounted on the stand.
Contact Now
Falling Hammer Impact Tester SKZ148BUsing Double tube structure, Mainly consists: workbench, Prevent secondary impact mechanism, Hammer, Lifting mechanism, Automatic drop hammer mechanism, Motor, reducer, Electric control box and StandWidely used in a variety of plastic pipe impact resistance of measurement, and also for plates, profiles measured impact. StandardISO 3127, MT-558, ISO 4422 Technical parametersMaximum impact height2000mmHeight positioning error≤ ± 2mmHammer weight0.25 ~ 10.00Kg (0.125Kg / per increment)Optional 15.00KgHammerD25, D90Lift hammer modeAuto (also can hand t
Contact Now
Falling ball impact tester is suitable for all kinds of plastic sheet impact test. Standard: ASTM D639-81(1985): STANDARD methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball(falling ball) Working principle:On the lift beams, equipped with a control device for controlling the falling ball, release the ball, the impact of the sample, so that to achieve the purpose of testing. Impact energy can be calculated according to the weight and height of the ball.
Contact Now
SKZ144 Vicat Softening Temperature Tester Used to measure polymer materials' Vicat softening and heat distortion temperatures. Feature 1.Setting the temperature with a temperature controller and measuring distortion with a meter.2.The specimen stand has an automated up/down motion and can test three specimens simultaneously.Standard:ASTM-D1525, ASTM-D648, DIN53460,DIN53461,ISO-306,ISO-75Technical parameters: Temperature rangeroom temperature~350℃Heating speed(12±1)oC/6min[(120±10)oC/h](5±0.5)oC/6min[(50±5)oC/h]Max temperature error±0.1℃Measuring range of distortion0-1mmMeasu
Contact Now
Leak Tester is a kind of tester that use compression air to produce negative pressure by vacuum device to test the seal capability and processing technique of soft plastic packaging material in food and pharmaceutical industry. It also can test the specimen which has done the drop and compression test. Standards GB/T15171-94 (the Seal Testing Method for soft packaging).
Contact Now
SKZ103B Lab Carton Anti Puncture Tester MachineFeature1. Micro-soft computer control, open framework, high automatically process, easy to operate and credibility.2. Test automatically, estimation intellectualized, operating system displays the results Real-time.3. Test, Stat. and print automatically, data preserving function.4.
Contact Now
SKZ129B DIN Abrasion Tester DIN AbraderStandard ISO4649, DIN 53516Technical parameters:Sample load2.5N, 5N,10NStroke40m or 20mRoller speed40 ± 1r/minRoller diameterФ150 ± 0.2mmRoller length460mmSample dia.Ф16 ± 0.2mmPowerAC220V ± 10% 50HzDimension700mm × 340mm × 300mmWeight63kgEXCELLENT PERFORMANCE,SUPERB TECHNOLOGYStainless steel rollerAnti-corrosion and anti-rustThe operation interface is simple and clearStandard: lS04649, DIN 53516PRODUCT DISPLAYSKZ129B is suitable for wear testing ofelastic materials, rubbertires, conveyor belts, soles, soft synthetic leather, leather andother materials, w
Contact Now
Digital Melting Point Tester SKZ1040BDetermination of the melting point of crystalline substance to determine purity of drugs, dyes, perfumes and the like crystals of organic compounds Feature1. Photoelectric detection2. large backlit LCD screen display3. Numeric keypad. Melting curve can be displayed directly4.
Contact Now
Product DescriptionDown Filling Power Tester JISL 1903 DigitalUsed to test the feather and down filling power.Measurement accuracy: 0.1mmMeasuring height: 750 mmStandard:IDFB-FP, JIS L1903, BSEN12130JIS L1903(Testing methods for feathers): This Japanese Industrial Standard specifies testing methods for down and feather intended for filled manufactured articles.Product ParameterMeasurement accuracy0.1mmMeasuring height750mmMeasurement speed0-1000mm / min adjustableCylinder diameter288mm, 245mmOptional 290 mm, JISL1903, BSEN12130Measuring pressure plate94.25g, diameter 284 mm68.4g diameter
Contact Now
