The sample cutter for Cobb absorbency testing.Technical parameters:Specimen thickness0.1-1.0(mm)Error±0.2mmSpecimen diameter125mmDimension 240×288×435(mm)Weight28Kg
Contact Now
Edge Crush Sample CutterCorrugated fiberboard Edge Crush Test/adhesive sample cutterSample size25mm×100mm (ECT), 25mm×80mm (adhesive)Result error±0.5mmMaximum length220mmMaximum thickness18mmDimension430mm×380mm×200mmWeight 22kg
Contact Now
SKZ112-3 Corrugated fiberboard Flat Crush Test sample cutterSample area64.5cm2 , 32.2cm2Result error±0.5cm2Sample thickness≤7mmWeight 2.5kg
Contact Now
Ring crush Sample CutterSample cutter for RCT, Sample length: 152 mm, Sample width: 12.7 mmSample length152 mmSample width12.7 mmTwo length sides parallelism＜0.015mmSample thickness(0.1～1.0)mmDimension 570×190×368(mm)Weight 20KG
Contact Now
Crush Tester is used to do the Ring Crush test, Edge Crush Test, Flat Press Test, Adhesive Strength Test, and Paper Tube Compress Test.We also have the accessories for its each test. Standards:ISO 3070, ISO 12192-2011, ISO 7263-2011, ISO 3035-2011 Feature：1. Microprocessor control, automatically carry the test according to testing requests. 2. Protect press sensor through the protection switch for over- loading. 3. Analyzing the group of testing data and to show the maximum, minimum, average, 4.
Contact Now
The Auto-pneumatic Cutter Press is driven by air pressure only. lt is suitable for laboratory to punch every kind of standard specimens from rubber, plastic, leather Standard: ASTM-D412Technical parameters:TypesPNEUMATICMoving distance25mm～100mmWorking platform320 mm×220 mmSpecimen thicknessmaximum 10mmAir pressure0.6MPaDimension380mm×260mm×590mmNet weight40kg
Contact Now
High Quality Concora Medium Fluter (CCT, CMT) SKZ113To determinate of flat crush strength of corrugated paper when pressed standard waveform (i.e., from the flute corrugated base paper), comply with standard: ISO7263-1985: corrugating medium – Determination of flat crush resistance after laboratory fluting.Feature: 1.Using single-chip microprocessor control technology, Precision temperature controller
Contact Now
Laboratory Paper GSM Tester SKZ114CIt is the sample cutter for the test of all kinds of paper grammage and slice .The cutter conforms to the standard of QB/T1671—98. Technical parameters:Area100Cm2Specimen diameterΦ112.8±0.05mmSpecimen thicknesspaper: 0.1-1.0 (mm), cardboard: single wall <0.6mmDimension 270×260×405 (mm)Weight 15kg Structure and operationStructure: base, rack, gear, rack, upper edge and lower edge, specimen baffles, received board and operating handle.
Contact Now
Designed according to GB/T1540-1989, ISO535 (Cobb paper and cardboard absorbency method), which is used to test the absorbency of paper and cardboard, but not applied to evaluate the writing capability of paper and cardboard.Technical parameters:Metal cylinder inside area100±0.2cm², height: 50mmAbsorbency paper200~250g/m²Absorbency speed75mm/10minSmooth metal rollerwidth:200±0.5mm, weight:10±0.5kgDimension390×280×410 (mm)Weight 25kgOptional Balance: accuracy 0.001g, measure range 500gStopwatch: 1sGlass graduate: 100ml Cobb sample cutter
Contact Now
SKZ159 Color Fastness To Rubbing TestApply:To ascertain the rubbing color fastness of leather, knitted materials, textiles, and electro-chemical printing metal plates.Standard:GB/T3920, ISO105-X12, GB/T5712, ISO105-D02Mode of testing:Using a wet and dry rubbing cloth, gently scrub the sample, and then use the gray sample card to determine how stained and discolored it is.Feature1. Motor-driven, effective, and energy-efficient.2. Its crank and other important parts are made of stainless steel.3. Comes with a rectangular rubbing head for velvet fabric that measures 19 x 25.4 mm.
Contact Now
Salt spray corrosion test chamber is one of the three test facilities for artificial climate, such as Wet- heat, salt spray and mould.
Contact Now
Ozone aging test chamber is one of the climate simulation test equipment for testing vulcanized rubber in the static and dynamic tensile deformation state, exposure to air containing a certain concentration of ozone and a certain temperature environment, but no direct sunlight under the harsh Adaptability test conditions for a variety of research institutes and factories and mines laboratory test samples for the aging test.
Contact Now
Used to test product packaging for damage and evaluate impact resistance and the transport handling process; mostly used to ensure that product packaging can withstand the circumstances of transport capacity and hence enhance and optimize packaging design.Standard:ISO2248, JISZ0202-87Qualities:With a digital height indicator and height tracking decoder, a single wing drop tester may perform a free drop test of the package's surface, angle, and edge.
Contact Now
SKZ120B Clarity And Haze Meter For Plastic FilmHaze meter is relevant in all obvious and semitransparent parallel degree fabric for trying out transmittance and haze degree.Application:Applied to decide the transmittance, haze, reflectivity of transparent, translucent parallel flat objects ( Plastic plates, sheets, plastic film, glass), and additionally can decide the turbidity of some liquid (Water, beverage, pharmaceutical, coloring liquid, grease)Standards:ASTM D1003-61 and JIS K7136-2000Feature:1.
Contact Now
Standard: ISO1133 Feature:1. LCD display, time, temperature and sample times can be set.2. Built-in printer 3. Automatic cutting4. MFR test item Technical parameters:Test methodMFR (unit: g / 10min)Temperature rangeroom temperature ~ 300 ℃Temperature accuracy± 0.5 ℃Temperature Resolution0.1 ℃Measuring range0.1 ~ 300g / 10min (MFR)load3.187 ~ 211.82N is divided into eightBarrel diameterф9.55mm ± 0.025mmDie apertureΦ2.095 ± 0.005mmPowerAC220V±10% 50Hz 1kWDimension300mm×400mm×500mmWeight 35kg
Contact Now
SKZ1044B Flame Photometer Digital Flame Photometer Flame photometer is a relative measurement of the instrument, the concentration value of the sample under test conditions in the same relative value of the concentration of the standard solution. So before the test, you must first prepare a set of corresponding standard solution.
Contact Now
SKZ156B Elmendorf Tear TesterUsed to test the degree and burst force of leather, non-woven textiles, and materials while they are simultaneously under force in all directions (elastic diaphragm method).Standards: ISO2960, ISO13938.1-04, ASTMD3786, JIS1018Features: 1. Meeting the 50cm2 testing area requirements2. Support system for sample clamps3. Facilitating online correspondence Product ParametersTesting range0-2 Mpa (B type)The min. value0.002MpaTest area50cm2(Φ79.8mm), (B type)Elastic mold-plate size≤2mmThe max. burst length70±0.02mmThe max.
Contact Now
Digital Flame Photometer SKZ1044AFlame photometer is a relative measurement of the instrument, the concentration value of the sample under test conditions in the same relative value of the concentration of the standard solution. So before the test, you must first prepare a set of corresponding standard solution.
Contact Now
SKZ1050E-EX Gas Leak Test MachineThe device has a 3.5-inch high-definition IPS LCD colour screen, a 150-degree wide viewing angle, and an optional fall alarm function. It can be configured flexibly to accommodate one or more gas sensors.
Contact Now
Coating Test machineLaboratory small coating test machine, By controlling the speed and pressure to ensure a stable coating effect, to ensure uniformity and coating stability. It can works for coating test of paper, plastic, metal, PVC, PET, fabric, aluminum plate, etc.
Contact Now
Digital Internal Plybond Tester SKZ123For testing the Internal Bonding Strength of various paperboards. Standard: TAPPI-UM403.Test principle: the paperboard sample is impact in a certain angle and weight, the energy it has absorbed indicates the internal bonding strength. It could test five samples at one test. The test unit is optional: kg/cm, N/m, J. Feature:1. Mechatronics modern concept design, elegant appearance, easy maintenance.2. Glue pressed hydraulically, the pressure can be adjusted automatically.3.
Contact Now
SKZ1055 Differential Thermal AnalyzerDifferential thermal analysis: temperature under program control, the relationship and difference of temperature between the measured material and the reference.The DTA curves is to describe the changing relationship depending on temperature and time between the measured material and the reference compound. During the test, the sample temperature changes due to the phase change or an endothermic or exothermic reaction effects.
Contact Now
Digital Density Balance For Gold K Value SKZ400To test density of solid, liquid, powder, water-absorbent sample and Gold K value (A) Feature: 1. High-precision sensor, impact resistance, anti-overload, to ensure weighing accuracy and stability.2. Built-in rigorous test and calculation procedures, direct display density, without manual conversion.3. Aluminum shell, to enhance the anti-static balance anti-interference ability.4. High contrast LCD liquid crystal display, clear and intuitive readings.5.
Contact Now
SKZ1039 LED Disc Polarimeter Application Polarimeter Apparatus Polarimeter AnalyzerPolarimeter is the testing instruments to measure the optical rotation of material. By measurement of optical rotation of the sample can be analyzed to determine the concentration of substance, the content and purity. Widely used in pharmaceutical, drug testing, sugar, food, spices, MSG and chemical and oil industry. Features:1. Visual type2. manual measurement3. Economic price4.
Contact Now
