Five points Heat Seal Meter-manufacture,factory,supplier from China

SKZ1017B Five points Heat Seal TesterStructure: Divided into four parts of the air drive system, heat sealing device, temperature control system, time-conditioning systems.1). Air-driven systemIncluding pressure gauges, guide rod, cylinder, pneumatic valve, pressure regulator handle. First pull out the pressure adjustment handle, turn right to increase the sealing pressure, turn left to lower sealing pressure, push the handle towards to the host side after finishing setting the pressure, which can lock the setting values.2). Heat seal device: Including the upper and lower heat sealing rods.

Five-point heat-seal Tester (also known as gradient heat seal tester) can be used to determine the heat sealing temperature range , suitable packaging speed,  and heat sealing pressure of the plastic film substrate, the flexible packaging composite film, coated paper and other heat sealing composite membrane. It can also work with tensile tester to do heat seal strength test.  Structure: Divided into four parts of the air drive system, heat sealing device, temperature control system, time-conditioning systems. 1).

SKZ1017B Five point heat sealing apparatusThe Five-point heat-seal Tester, also known as the gradient heat seal tester, is a versatile tool used to determine various parameters related to heat sealing. It can be used to determine the heat sealing temperature range, suitable packaging speed, and heat sealing pressure of different materials such as plastic film substrates, flexible packaging composite films, coated paper, and other heat sealing composite membranes.

Be measured heat sealing temperature range of sealing compound, heat sealing strength, hot package of speed, heat sealing pressure, used for plastic, flexible packaging composite membrane, coated paper, foil.   1. Structure: It contains air drive system, sealing devices, temperature-conditioning systems, time-conditioning systems2. Air-driven system:  Including pressure gauges, guide rods, cylinder, pneumatic valve, pressure regulator handles, so on.

DO310F Portable Dissolved Oxygen MeterGENERAL FEATURESLCD show screen, 3.5 inches.Multi-reading characteristic lets in auto-read, timed-read and continuous-read.Automatic/Manual temperature compensation ensures correct results.Auto-hold function senses and locks the size endpoint.Data potential of up to five hundred units for every parameter (GLP-compliant).Support for USB communication.Auto-power off function efficaciously extends the battery carrier life.Reset function

TU4000E Turbidity MeasurementGENERAL FEATURES7” colorful touchscreen.Tungsten lamp light source met USEPA 180.1 requirement.3 photodiodes to ensure high accuracy.1-8 points calibration using Formazin standards or zero water.Autoranging from 0-4000 NTU.Data Storage capacity of 1000 sets (GLP-compliant).

SKZ104B Paper Bekk Smoothness Tester Testing MachineMain Features1.Imported oil-free vacuum pump2.Fast measurement: with small volume chamber measurement, which measurement time is only one-tenth of a large one, saving time in measurement. And the function of “automatic test" has been added, can greatly save time when testing high smoothness 3.Good seal: adopted foreign vacuum sealed plastic and advanced sealing technology to achieve the national standard requirements;4. Adopted 7.0 inches color touch-screen which makes it easy to operate.5.

Suitable for all kinds of film, shrink film, heat shrink pipe, back plate. Such as the overall collection of various beverage packaging shrink film, shrink packaging film for medical packaging. Testing of the heat shrinking properties in a liquid medium at various temperatures.

The drying oven can provide drying, baking, sterilization and heat treatment. Stainless steel tank and digital display, its working temperature can reach to the highest point from room temperature, which can also be adjusted arbitrarily.

Lab LED ISO 7027 Water Turbidity Meter Turbidimeter Turbidity Measurement Tester TU200GENERAL FEATURES1. 850nm LED light Source.2. Uses Nephelometric principle with 90° detection.3. Meets ISO 7027 and offers consistent light source for higher accuracy.4. Selectable turbidity units, including the NTU, FNU and EBC.5. Settable parameters, including user ID, number of calibration points, data and time, etc.6.

Product DescriptionDigital Benchtop Turbidity Meter Turbidimeter TU4000E Application: Surface water, groundwater, domestic drinking water, secondary water supply, swimming pool water, industrial water.General Features1.   7 inch colorful touch screen.2. Tungsten lamp light source met USEPA 180.1 requirement.3. 3 photodiodes to ensure high accuracy.4. 1-8 points calibration using Formazin standards or zero water.5.  Autoranging from 0-4000 NTU.6. Data Storage capacity of 1000 sets (GLP-compliant).7.

TU1000 Turbidity Measurement InstrumentGENERAL FEATURESLED light source at 850 nm.leverages the 90° detection concept of nephelometry.Complies with ISO 7027 and provides a steady light source for improved precision.Variable turbidity units, such as the EBC, FNU, and NTU.Configurable parameters, such as the user ID, data and time, number of calibration points, etc.High precision is ensured by two photodiodes.Calibration from 1-6 points utilizing zero water or Formazin standards.Autoranging between 0 and 1000 NTU.Up to 2000 sets of data can be stored (GLP-compliant).The computer may receive

Used to test the Vicat softening temperature and heat distortion temperature of polymer materials  Feature 1.Using meter to measure distortion and temperature controller to set temperature.2. Specimen stand can automatically go up and down and test 3 specimens in one time.

Digital Ph Meter PH510TFeatures:1.4.3-inch high contrast color LCD touch screen2.Intelligent operation device gives points together with consumer management, calibration management, electrode management, technique management, information management, Log Management and etc.3.Multi-reading feature allows auto-read, timed-read and continuous-read. 4.Automatic/Manual temperature compensation ensures accurate results.

SKZ1015 Vacuum Drying ChamberThe drying oven is capable of heat treatment, baking, sterilizing, and drying. Its digital display and stainless steel tank allow it to operate at a temperature that can be freely adjusted to the maximum point from room temperature.Technical parameters:voltage220V　50HzTemperature control rangeRT+10℃～250℃Temperature resolution0.1℃Constant temperature fluctuation±1℃input power1120WWorking temperature5℃～40℃Liner size (mm)420×400×345Dimensions (mm)720×580×530Load carrier (standard)2pcsTiming range1～9999 minutes

Leak Tester is a kind of tester that use compression air to produce negative pressure by vacuum device to test the seal capability and processing technique of soft plastic packaging material in food and pharmaceutical industry. It also can test the specimen which has done the drop and compression test.  Standards GB/T15171-94 (the Seal Testing Method for soft packaging).

Digital Ph Meter For Water PH200EGENERAL FEATURESHigh resolution LCD display screen, 6.0 inches.Multi-reading feature allows auto-read and continuous-read.Automatic/Manual temperature compensation ensures accurate results.Auto-hold feature senses and locks the measurement endpoint.Data Storage 50 sets for each parameter.Reset feature automatically resumes all settings back to factory default options.IP54 waterproof.1-3 points calibration with Standard Recognition.Automatic/Manual temperature compensation ensures accurate resultsIncludesE-301-QC 3 in 1 pH composite electrodeNIST pH standard sol

TPS Thermal Conductivity Meter SKZ1061CProduct detailIt can be used for various heat conduction properties of different types of materials testing. Transient Plane Source method is to study the thermal conductivity method, the latest one, which makes measurement technology to a whole new level. In the study of material capable of fast and accurate measurement of thermal conductivity for the enterprise quality control, material production and laboratory studies provide a great convenience. The instrument is easy to operate, simple to understand, will not cause damage to

SKZ144 Rubber Vicat Softening Point Tester used to calculate the Vicat softening and heat distortion temperatures of polymer materialsCharacteristic1.Using a temperature controller to set the temperature and a meter to measure distortion.2.

M310F-A Multi-parameter AnalyzerPH1.1-5 points calibration with Standard Recognition.2.Selectable pH buffer groups, including NIST, DIN, GB, USA.3.Automatic electrode diagnosis with pH slope and offset display.

Used to carry the heat-ageing test for plasticity material, insulation material. Temperature controlled by digital display, PID auto adjustment, can arbitrarily set the working temperature from room temperature to 200℃ or 300℃, automatically keep temperature.

Laboratory Desktop Water Conductivity Meter1. High resolution LCD display, 5.7 inches.2. Multi-reading feature allows auto-read, timed-read and continuous-read.3. Automatic/Manual temperature compensation ensures accurate results.4. Auto-hold feature senses and locks the measurement endpoint.5. Data Storage 500 sets (GLP-compliant).6. Support for USB or RS-232 communication.7. Reset feature automatically resumes all settings back to factory default options.8. Waterproof: IP54.9. 1-3 points calibration with Standard Recognition.10.

Salt spray corrosion test chamber is one of the three test facilities for artificial climate, such as Wet- heat, salt spray and mould.

TU1000P Portable TurbidimeterGENERAL FEATURE850nm LED light Source.Uses Nephelometric principle with 90° detection.Meets ISO 7027 and offers consistent light source for higher accuracy.Selectable turbidity units, including the NTU, FNU and EBC.Settable parameters, including user ID, number of calibration points, data and time, etc.Auto-power-off feature effectively extends the battery usage time.IP65 waterproof.