Five points Heat Seal Equipment-manufacture,factory,supplier from China

SKZ1017B Five points Heat Seal TesterStructure: Divided into four parts of the air drive system, heat sealing device, temperature control system, time-conditioning systems.1). Air-driven systemIncluding pressure gauges, guide rod, cylinder, pneumatic valve, pressure regulator handle. First pull out the pressure adjustment handle, turn right to increase the sealing pressure, turn left to lower sealing pressure, push the handle towards to the host side after finishing setting the pressure, which can lock the setting values.2). Heat seal device: Including the upper and lower heat sealing rods.

Five-point heat-seal Tester (also known as gradient heat seal tester) can be used to determine the heat sealing temperature range , suitable packaging speed,  and heat sealing pressure of the plastic film substrate, the flexible packaging composite film, coated paper and other heat sealing composite membrane. It can also work with tensile tester to do heat seal strength test.  Structure: Divided into four parts of the air drive system, heat sealing device, temperature control system, time-conditioning systems. 1).

SKZ1017B Five point heat sealing apparatusThe Five-point heat-seal Tester, also known as the gradient heat seal tester, is a versatile tool used to determine various parameters related to heat sealing. It can be used to determine the heat sealing temperature range, suitable packaging speed, and heat sealing pressure of different materials such as plastic film substrates, flexible packaging composite films, coated paper, and other heat sealing composite membranes.

Be measured heat sealing temperature range of sealing compound, heat sealing strength, hot package of speed, heat sealing pressure, used for plastic, flexible packaging composite membrane, coated paper, foil.   1. Structure: It contains air drive system, sealing devices, temperature-conditioning systems, time-conditioning systems2. Air-driven system:  Including pressure gauges, guide rods, cylinder, pneumatic valve, pressure regulator handles, so on.

TU4000E Turbidity MeasurementGENERAL FEATURES7” colorful touchscreen.Tungsten lamp light source met USEPA 180.1 requirement.3 photodiodes to ensure high accuracy.1-8 points calibration using Formazin standards or zero water.Autoranging from 0-4000 NTU.Data Storage capacity of 1000 sets (GLP-compliant).

Suitable for all kinds of film, shrink film, heat shrink pipe, back plate. Such as the overall collection of various beverage packaging shrink film, shrink packaging film for medical packaging. Testing of the heat shrinking properties in a liquid medium at various temperatures.

TU1000 Turbidity Measurement InstrumentGENERAL FEATURESLED light source at 850 nm.leverages the 90° detection concept of nephelometry.Complies with ISO 7027 and provides a steady light source for improved precision.Variable turbidity units, such as the EBC, FNU, and NTU.Configurable parameters, such as the user ID, data and time, number of calibration points, etc.High precision is ensured by two photodiodes.Calibration from 1-6 points utilizing zero water or Formazin standards.Autoranging between 0 and 1000 NTU.Up to 2000 sets of data can be stored (GLP-compliant).The computer may receive

DO310F Portable Dissolved Oxygen MeterGENERAL FEATURESLCD show screen, 3.5 inches.Multi-reading characteristic lets in auto-read, timed-read and continuous-read.Automatic/Manual temperature compensation ensures correct results.Auto-hold function senses and locks the size endpoint.Data potential of up to five hundred units for every parameter (GLP-compliant).Support for USB communication.Auto-power off function efficaciously extends the battery carrier life.Reset function

The drying oven can provide drying, baking, sterilization and heat treatment. Stainless steel tank and digital display, its working temperature can reach to the highest point from room temperature, which can also be adjusted arbitrarily.

Used to test product packaging for damage and evaluate impact resistance and the transport handling process; mostly used to ensure that product packaging can withstand the circumstances of transport capacity and hence enhance and optimize packaging design.Standard:ISO2248, JISZ0202-87Qualities:With a digital height indicator and height tracking decoder, a single wing drop tester may perform a free drop test of the package's surface, angle, and edge.

Leak Tester is a kind of tester that use compression air to produce negative pressure by vacuum device to test the seal capability and processing technique of soft plastic packaging material in food and pharmaceutical industry. It also can test the specimen which has done the drop and compression test.  Standards GB/T15171-94 (the Seal Testing Method for soft packaging).

SKZ1015 Vacuum Drying ChamberThe drying oven is capable of heat treatment, baking, sterilizing, and drying. Its digital display and stainless steel tank allow it to operate at a temperature that can be freely adjusted to the maximum point from room temperature.Technical parameters:voltage220V　50HzTemperature control rangeRT+10℃～250℃Temperature resolution0.1℃Constant temperature fluctuation±1℃input power1120WWorking temperature5℃～40℃Liner size (mm)420×400×345Dimensions (mm)720×580×530Load carrier (standard)2pcsTiming range1～9999 minutes

M310F-A Multi-parameter AnalyzerPH1.1-5 points calibration with Standard Recognition.2.Selectable pH buffer groups, including NIST, DIN, GB, USA.3.Automatic electrode diagnosis with pH slope and offset display.

High and low temperature test chamber is one of the climate simulation chambers for the assessment of various electronic products, test at high temperature, low temperature environment.Features:1.Unique balance thermostat, high precision, high temperature stability control.2.Temperature controller with high precision, high stability, PID self-tuning, LED visual display, to ensure precise control of equipment. Equipment with over-temperature3.

SKZ1053 High Pressure Automatic Thermogravimetric Analysis LabThermo gravimetric evaluation (TG, TGA) is to look at the exchange of pattern high-quality with temperature or time in the manner of heating and consistent temperature, the motive is to find out about the thermal balance and composition of the material.Widely used in the lookup and development, procedure optimization and satisfactory manipulate of plastics, rubber, coatings, pharmaceuticals, cat

SKZ104B Paper Bekk Smoothness Tester Testing MachineMain Features1.Imported oil-free vacuum pump2.Fast measurement: with small volume chamber measurement, which measurement time is only one-tenth of a large one, saving time in measurement. And the function of “automatic test" has been added, can greatly save time when testing high smoothness 3.Good seal: adopted foreign vacuum sealed plastic and advanced sealing technology to achieve the national standard requirements;4. Adopted 7.0 inches color touch-screen which makes it easy to operate.5.

Used to carry the heat-ageing test for plasticity material, insulation material. Temperature controlled by digital display, PID auto adjustment, can arbitrarily set the working temperature from room temperature to 200℃ or 300℃, automatically keep temperature.

DSC Differential Scanning Calorimeter SKZ1052Product descriptionDSC is designed to determine the inner heat transition relating to temperature and heat flow, it is widely used in the field of polymer development, performance testing & quality control.

Salt spray corrosion test chamber is one of the three test facilities for artificial climate, such as Wet- heat, salt spray and mould.

TU1000P Portable TurbidimeterGENERAL FEATURE850nm LED light Source.Uses Nephelometric principle with 90° detection.Meets ISO 7027 and offers consistent light source for higher accuracy.Selectable turbidity units, including the NTU, FNU and EBC.Settable parameters, including user ID, number of calibration points, data and time, etc.Auto-power-off feature effectively extends the battery usage time.IP65 waterproof.

Laboratory Rotary Digester Testing EquipmentFeatures1. Versatility: It is designed for caustic cooking and acid cooking, and can also be used for cooking and bleaching of other liquidswith a work pressure not exceeding 8Kg/cm².  This versatility allows it to be used in a wide range of chemical processes.2. Durable Construction: The device is primarily composed of high-quality stainless steel, which ensures high corrosion resistance and longevity.3.

SKZ125 Rapid-kothen Sheet Former Paper Sheet Making Test MachineFeature: 1.Mainly composed by dryers, vacuum pumps, and sheet former (press)2.Sheet former parts: power-driven drain off water, white water cycle use, power-driven feed water, aerodynamic homogenate ( also can manual homogenate), Water molding or vacuum pump suction molding3.Dry parts adopt vacuum heating and drying, vacuum pump adopts water cycle, heating element use heating plate, temperature control system, and has a short circuit, disconnection, and automatic over-temperature alarm function, with a stop anti-oil

DSC is widely utilized in the fields of polymer research, performance testing, and quality control. It is intended to identify the inner heat transition in relation to temperature and heat flow. The fields of glass transition temperature, melting point, cold crystallization, phase transition, and oxidation induction time (OIT) are all included in DSC study and development.Standards:ISO/TR10837:1991, ASTM D3895-1998, ASTM E 967, ASTM E 968, ASTM E 793, ASTM D 3895, ASTM D 3417, ASTM D 3418, ISO 11357-6Features: 1. Rich information is shown on an industrial-grade 7-inch touch screen.2.

SKZ1052C-1L Differential Scanning Calorimeter360° lab and factory: https://skztester.en.alibaba.com/company_profile.html?spm=a2700.shop_oth.8.9DSC Video: https://youtu.be/m9z9fUnwLvg DSC is designed to determine the inner heat transition relating to temperature and heat flow, it is widely used in the field of polymer development, performance testing & quality control.