SKZ107A Elmendorf Tear TesterIt is a specialized tool used to measure the strength of paper tears.
Contact Now
SKZ156B Elmendorf Tear TesterUsed to test the degree and burst force of leather, non-woven textiles, and materials while they are simultaneously under force in all directions (elastic diaphragm method).Standards: ISO2960, ISO13938.1-04, ASTMD3786, JIS1018Features: 1. Meeting the 50cm2 testing area requirements2. Support system for sample clamps3. Facilitating online correspondence Product ParametersTesting range0-2 Mpa (B type)The min. value0.002MpaTest area50cm2(Φ79.8mm), (B type)Elastic mold-plate size≤2mmThe max. burst length70±0.02mmThe max.
Contact Now
Mechanical Elmendorf Tearing TesterIt is the special instrument for paper tearing strength test. Standard: ISO 1974(paper--tearing strength test method), GB455.1, Technical parameter:parameterindexTest range(10～1000)Mn, Standard arm and Light arm are the standard fittings.Lightest arm special customization according to need.Standard arm(10～1000)mN，degree minimum: 10mNLight arm (10～500)mN, degree minimum: 5mNLightest arm (10～200)mN, degree minimum: 2mN (extra charge)VeracityErrorMaximum range20%～80% ±1%, out range±0.5%FSRepeat errorMaximum range20%～80% ≤1%, out range
Contact Now
Burst tester is the simple instrument for checking out the anti-bursting diploma of paper or cardboard, the usage of Mullen check methods. ApplicationIt is used to decide a range of paper and no longer extra than 2000kpa monolayer of skinny cardboard, or a range of single and multi-layer cardboard and corrugated cardboard can additionally be used to notice silk cotton and different non-paper products. StandardsISO2759, ISO 2758. PrincipleIt adopt
Contact Now
Two directions Vibration tester SKZ126CAny product in process of transit, use, preservation will produce shock, vibration, which may cause seriously affecting and unnecessary economic losses, in order to avoid this situation, must know in advance the components resistant to vibration life. Technical parameters:Vibration directionvertical, horizontalPlatform body size500*500mmMaximum test load100kgVibration machine power2.2KWSupply voltage220V + 20%Time controlAny time can be set (seconds)Maximum current10AAmplitude0 to 5 mmMaximum acceleration0-20gAccuracy Displayed to 0.01Hz, 0.1Hz
Contact Now
Product DescriptionLab Manual Yarn Twist Tester SKZ192C Used for testing the twist nonhmogeneitiy, the twist unevenness, and the twist shrinkage of various yarns and for product quality inspection to eliminate problems in the process.Standards: GB/T2543.1/2 FZ/T10001 ISO2061 ASTM D1422 JIS L1095Features:1. Driving form: By hand operating.2.
Contact Now
SKZ145 Melt Index Tester Mfi TesterFor engineering plastics such as polycarbonate, nylon, and fluorine plastics, whose melt temperatures are higher, as well as fit for plastics tests of polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc., whose melt temperatures are lower, the following parameters must be determined: melt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Char
Contact Now
Falling ball impact tester is suitable for all kinds of plastic sheet impact test. Standard: ASTM D639-81(1985): STANDARD methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball(falling ball) Working principle:On the lift beams, equipped with a control device for controlling the falling ball, release the ball, the impact of the sample, so that to achieve the purpose of testing. Impact energy can be calculated according to the weight and height of the ball.
Contact Now
Automatic Carton Stiffness Tester SKZ105BThe tester is used to evaluate the stiffness and resiliency of cardboard by international Taber method.Feature1. 5.7in LCD, real-time display stiffness value and curves2. Automatic zero adjustment.3. Display memory, statistics and print of test results4. The angle can be set between (1 ~ 90) °.5. Test time is within a predetermined range (3s ~ 35s) arbitrarily set.6.
Contact Now
Digital Melting Point Tester SKZ1040BDetermination of the melting point of crystalline substance to determine purity of drugs, dyes, perfumes and the like crystals of organic compounds Feature1. Photoelectric detection2. large backlit LCD screen display3. Numeric keypad. Melting curve can be displayed directly4.
Contact Now
SKZ128 Digital Shore Hardness Tester Plastic and rubber that have been vulcanized are tested for hardness using a shore hardness tester. The stand holds the hardness head in place. To perform spot testing, you can also remove the head from the stand.
Contact Now
SKZ136 Rubber Impact Resilience Tester DIN 53512 MeterTechnical parameters:Diameter of impactorФ15mmSpecimen specificationФ29mm×12.5mmImpact weight0.35-0.1kgImpact speed1.4+0.6m/sStrain energy density351+112kJ/m³Resilience value error±0.5%Dimension320mm×200mm×360mmWeight20kgSKZ136IMPACT RESILIENCE TESTEREXCELLENT PERFORMANCE,SUPERB TECHNOLOGYMOQ 1 pCFactory direct saleStandard:1S04662,ASTM-D 1054-66,DIN 535125KPRODUCT DISPLAYNDUSTERubber lmpact Resilience TesterThe instrument is the pendulumimpact resiliency tester to measure the resilience cost of vulcanized rubbelSuitable for
Contact Now
Lab Vibration Tester SKZ126AThis tester is applicable to toys, electronics, furniture, gifts, ceramics, packaging and other products to simulate transport tests, accords with the U.S.
Contact Now
SKZ1017B Five point heat sealing apparatusThe Five-point heat-seal Tester, also known as the gradient heat seal tester, is a versatile tool used to determine various parameters related to heat sealing. It can be used to determine the heat sealing temperature range, suitable packaging speed, and heat sealing pressure of different materials such as plastic film substrates, flexible packaging composite films, coated paper, and other heat sealing composite membranes.
Contact Now
SKZ128A Durometer Hardness Tester For RubberA shore hardness tester is used to determine the hardness of vulcanized rubber and plastic.The hardness head has been mounted on the stand.
Contact Now
SKZ106A Paper Thickness Gauge Meter Tester DeviceThe tester is applying to test the thickness of paper and cardboard. Standard:ISO534: Paper and board -Determination of thickness, density and specific volumeISO 438:1980.
Contact Now
Hydrostatic/Burst Tester is used to determine the long-term hydrostatic strength and instant blasting of PVC,PE,PPR,ABS and other plastic pipes. Standards: ISO1167-2006, ASTMD1598-2004, ASTMD1599, ISO9080, CJ/T108, ASTMF1335. Mainframe1.It is controlled both by PC and “Precision Pressure Controlling Unit”.2.It has LCD screen3.Every station controls separately.
Contact Now
SKZ105B Paper Carton Taber Bending Stiffness Tester MachineFeature 1. 5.7in LCD, real-time display stiffness value and curves2. Automatic zero adjustment.3. Display memory, statistics and print of test results4. The angle can be set between (1 ~ 90) °.5. Test time is within a predetermined range (3s ~ 35s) arbitrarily set.6.
Contact Now
Product DescriptionBenchtop Fabric Formaldehyde Tester SKZ190B For the rapid determination of formaldehyde content in textiles, by Extraction method.Standards: SN/T2195, ISO14184-1, LAW 112Features:1.Can be controlled by LCD display or PC.2.Automatic spectrum data processing, report printing.3. With function of absorption curve, selected wavelength, absorbance and transmittance.4. Spectrophotometer, automatic test, three samples in one time.5.
Contact Now
Product DescriptionDigital Bursting Strength Tester SKZ156B Used for testing the burst force and degree of fabrics, non-woven fabrics, leather, When under force in all directions at the same time (elastic diaphragm method).Standards: ISO2960, ISO13938.1-04, ASTMD3786, JIS1018Features:1. Meeting the testing area of 50cm2（Φ79.8mm） 2. Sample clamp support system 3. Supporting on-line communicationProduct ParametersTesting range0-2 Mpa (B type)The min. value0.002MpaTest area50cm2(Φ79.8mm), (B type)Elastic mold-plate size≤2mmThe max. burst length70±0.02mmThe max.
Contact Now
Laboratory Paper Dust Tester SKZ116 The tester is applied to test the dust of paper and cardboard. The parameters and performance conform to the standard of GB/T1541-1989 (Tappi T 437 om-1985) Technical parameters:Light source20W fluorescent lampIrradiation degree60°Working platformefficient area 0.0625 m², rotating 360°Standard dust image0.05-5.0(mm²)Dimension750×350×500 (mm)Weight12.5 kg
Contact Now
SKZ103B Lab Carton Anti Puncture Tester MachineFeature1. Micro-soft computer control, open framework, high automatically process, easy to operate and credibility.2. Test automatically, estimation intellectualized, operating system displays the results Real-time.3. Test, Stat. and print automatically, data preserving function.4.
Contact Now
SKZ144 Vicat Softening Temperature Tester Used to measure polymer materials' Vicat softening and heat distortion temperatures. Feature 1.Setting the temperature with a temperature controller and measuring distortion with a meter.2.The specimen stand has an automated up/down motion and can test three specimens simultaneously.Standard:ASTM-D1525, ASTM-D648, DIN53460,DIN53461,ISO-306,ISO-75Technical parameters: Temperature rangeroom temperature~350℃Heating speed(12±1)oC/6min[(120±10)oC/h](5±0.5)oC/6min[(50±5)oC/h]Max temperature error±0.1℃Measuring range of distortion0-1mmMeasu
Contact Now
IGT Printability Tester SKZ1032Printability Tester is a most basic designed for paper and paperboard printing picking printability test development of computer process control apparatus. Applicable to all kinds of offset, letterpress and gravure paper and cardboard printing simulation test. Equipped with a high speed ink refilling equipment, a standard scale, aluminum printing plates, wrapping paper.StandardsISO3782, GB/T2679.15, QB/T1058,TAPPI 514 and 575, SCAN P 63:90 Feature: ① the control system accurate.
Contact Now
