Elmendorf Tear Resistance-manufacture,factory,supplier from China

SKZ107A Elmendorf Tear TesterIt is a specialized tool used to measure the strength of paper tears.

SKZ156B Elmendorf Tear TesterUsed to test the degree and burst force of leather, non-woven textiles, and materials while they are simultaneously under force in all directions (elastic diaphragm method).Standards: ISO2960, ISO13938.1-04, ASTMD3786, JIS1018Features: 1. Meeting the 50cm2 testing area requirements2. Support system for sample clamps3. Facilitating online correspondence Product ParametersTesting range0-2 Mpa (B type)The min. value0.002MpaTest area50cm2(Φ79.8mm), (B   type)Elastic mold-plate size≤2mmThe max. burst length70±0.02mmThe max.

Mechanical Elmendorf Tearing TesterIt is the special instrument for paper tearing strength test. Standard: ISO 1974(paper--tearing strength test method), GB455.1,    Technical parameter:parameterindexTest range(10～1000)Mn, Standard arm and Light arm are the standard fittings.Lightest arm special customization according to need.Standard arm(10～1000)mN，degree minimum: 10mNLight arm (10～500)mN, degree minimum: 5mNLightest arm (10～200)mN, degree minimum: 2mN (extra charge)VeracityErrorMaximum range20%～80% ±1%, out range±0.5%FSRepeat errorMaximum range20%～80% ≤1%, out range

SKZ143 Accelerated ageing and heat resistance testsStandard:ISO 188-- Rubber, vulcanized or thermoplastic--Accelerated ageing and heat resistance tests--Air-oven method.Technical parameters:The highest temperature200℃ (A type) , 300℃ (B type)Temperature fluctuation±1℃Turntable speed12r/minDimension of working room450×450×450 mmRated power2.2KWPowerAC220V, 50HZDimension870×660×1350 (mm)Net weight180kgTEMPERATURE CONTROLLED BYDIGITAL DISPLAYPOWVEFWORKING TEMPERATURE:FROM ROOM TEMPERATURE TO200℃ (A TYPE) OR 300'℃ (B TYPE)DIMENSION OF WORKING ROOM:450x450x450 MMPID AUTO ADJ

Product DescriptionLab Textile Thermal Resistance Tester SKZ175 For the warmth reteining performance (thermal resistance) detection of various fabrics, seam products and insulation materials, using hot plate, by heat-dispersing method.Standards: ISO11092, ASTMD1518, JIS-1096.Features:1. With a computer interface, and test software.2. Measured conductivity coefficient, heat rate, the CLO value. Automatic conversion heat rate, heat transfer coefficient, CLO value.3. Imported temperature sensor, accurate and reliable.4.

For tensile, compression, bending, shear, tear, peel performance test.Feature1.Measurement and control software using Windows 7 operating system platform, graphical and graphical software interface, flexible data processing, modular programming language VB, safety limit protection.2.With automatic algorithm generation, automatic test report editing capabilities3.

SKZ0154 Universal Tensile MachinePerformance tests include tensile, compression, bending, shear, tear, and peel.Feature1.Using the Windows 7 operating system platform, measurement and control software has a graphical user interface, flexible data processing, modular programming in VB, and safety limit protection.2. Equipped with automated algorithm development and automated test report editing features.3. Determine the elastic modulus, average peel force, maximum force, yield strength, and non-proportional yield strength. introduction of control software1.

SKZ0154 Universal Tensile Testing MachineFor tensile, compression, bending, shear, tear, peel performance test.Feature1.Use of the Windows 7 operating system platform, graphical and graphical software interface, flexible data processing, modular programming language (VB), and safety limit protection are features of the measurement and control software.2. With the ability to automatically create algorithms and change test reports3.

PH110B pH MeterFeatures:The screen is 3.5 inches and is LCD.The "Reset" feature automatically returns all settings to their original factory settings.The battery service life is significantly increased by the auto-power-off feature.IP65 water resistance.

Dart impact testing machine used for plastic films and sheets of impact test to evaluate the impact resistance, it adopts background light source for test results.StandardISO7765-85: Determination for Impact Resistance of Plastic Film and SheetingGB9639-88: Impact Resistance Test of Plastic Films and SheetsASTM D1709 - 09 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart MethodTechnical parametersDart-head weight50-2000g, 5g/incremental (5g*5pcs,15g*15pcs, 30g*10pcs, 45g*10pcs, 80g*10pcs, 90g*15pcs)Dart-head semi-diameterA method: R19

Lab Perspiration Fastness Tester Perspirometer SKZ158 Application:Used for testing the color fastness to perspiration of all textiles and the performance of the color fastness to water, sea water and saliva of all be painted and colored textiles.Standards: Sweat-resistance: GB/T3922, AATCC15, ISO105 Seawater-resistance: GB/T5714, AATAA107, ISO105 Distilled water-resistance: GB/T5713, AATCC106, ISO105Principle About AATCC15: Colored specimens and other fibrous materials (for staining) are joined, immersed in a simulated acidic perspiration solution, subjected to a fixed mechani

SKZ165 Martindale Pilling TesterUsed to evaluate how well textiles and membrane materials perform in terms of wearing resistance, abrasion, and appearance change (pilling degree/class).Standards:ASTM D4970,ASTM D4966,ISO12947,JIS L1096,TM112 M&S, FZ/T20020,IWS TM196,ASTM D3886,DIN53863/53865, BS3424/5690,BS EN 388/530,ISO12945-2Test mode:Mode 1: Using a circular specimen made of the same material fabric and friction with a Lissajous graphic motion trajectory, the specimen can reach the necessary speed while assessing sample pilling at a certain pressure.

SKZ148 Drop Dart Impact TesterThe impact resistance of plastic films and sheets is tested using a dart impact testing equipment, which uses a background light source to record test findings.StandardISO7765-85, GB9639-88, ASTM D1709 - 09 Technical parametersDart-head weight50-2000g, 5g/incremental (5g*5pcs,15g*15pcs, 30g*10pcs, 45g*10pcs, 80g*10pcs, 90g*15pcs)Dart-head semi-diameterA method: R19±1mm,B method: 25±1mmDart-head accuracy0.1%Impact height660mm, 1500mmImpact energy30JSample clamp deviceexternal dia.: 150mm, inside dia.: 125mmWorking t

SKZ129B DIN Abrasion TesterFor determination of abrasion resistance of rubber tires, rubber overshoes, adhesive tape, to identify the quality of rubber products. Rubber compounds were friction with the cloth in a certain load to determine the amount of abrasion of the sample within a predetermined stroke.Standard ISO4649, DIN 53516Technical parameters:Sample load2.5N, 5N,10NStroke40m or 20mRoller speed40 ± 1r/minRoller diameterФ150 ± 0.2mmRoller length460mmSample dia.Ф16 ± 0.2mmPowerAC220V ± 10% 50HzDimension700mm × 340mm × 300mmWeight63kg

SKZ107B Elemendorf  Internal Tearing Resistance Strength Tester EquipmentUsed for paper tearing strength test as well as cardboard low-tearing strength test by Elemendorf method.  Standard: ISO 1974(paper--tearing strength test method), ASTM D689-03 Standard Test Method for Internal Tearing Resistance of Paper, GB455.1, ISO6383/2-1983 FeatureIt can test automatically, LCD displays data. The tester is incorporated with mechanize and electrization.

Digital Food Powder Moisture Meter SKZ111CSuitable for measuring moisture of dough, pasta, bread, cakes, moon cake stuffing, fishmeal, bean paste, date paste, fruit juices, dried fruit, dried vegetables, dried sweet potatoes, dried apples, dates, and the like sticky granules, blocks, granules, powder.Feature1. Adopts the principle of high frequency, the frequency is above 10MHz.2. Sensor probe is made of 316L steel and polytetrafluoroethylene, corrosion resistance and wear resistance.3.

SKZ1018B Karl Fischer Volumetric TitrationKarl Fischer titration method is utilized by the auto-analyzer to determine moisture content.Standards:ISO 10337,ASTM D 1744, ISO 760 , ASTM E203Qualities:1.A new speed drop function that measures a sample in tens of seconds using automatic control electrode polarization voltage drop speed2.Having an extra current meter makes the titration procedure easier to understand.3.Specially selected materials with exceptional corrosion resistance make up the whole fluid route, ensuring long-term continuous operation.4.The termination titration, which uses

Product DescriptionLab Mace Snagging Tester SKZ168 To determine the snagging resistance of fabrics by Mace test method.Standards: GB/T11047-89, ASTMD3939, JISL1058Features:1. 4 testing positions for fast test, time-saving and stability.2. Digital display, rotary motor, chain wheel, aluminum alloy drum, mace, fixed guide rod, adjusting guide rod and counter on the control panel.3.

It is auto-analyzer used Karl Fischer titration method,determination moisture content.Standards:ISO 10337,ASTM D 1744, ISO 760 , ASTM E203Features:1. New speed drop function, use automatic control electrode polarization voltage drop speed, measure a sample requires only tens of seconds2. Additional current meter makes the titration process more intuitive3. Entire fluid path is made of special materials selection, excellent corrosion resistance, to ensure long-term continuous operation4.

Volumetric Karl Fischer Titration SKZ1018BIt is auto-analyzer used Karl Fischer titration method,determination moisture content.Standards:ISO 10337,ASTM D 1744, ISO 760 , ASTM E203Features:1. New speed drop function, use automatic control electrode polarization voltage drop speed, measure a sample requires only tens of seconds2. Additional current meter makes the titration process more intuitive3. Entire fluid path is made of special materials selection, excellent corrosion resistance, to ensure long-term continuous operation4.

SKZ143A/B Ageing Oven For Plastic And RubberStandard:ISO 188-- Rubber, vulcanized or thermoplastic--Accelerated ageing and heat resistance tests--Air-oven method.Technical parameters:The highest temperature200℃ (A type) , 300℃ (B type)Temperature fluctuation±1℃Turntable speed12r/minDimension of working room450×450×450 mmRated power2.2KWPowerAC220V, 50HZDimension870×660×1350 (mm)Net weight180kgTEMPERATURE CONTROLLED BYDIGITAL DISPLAYPOWVEFWORKING TEMPERATURE:FROM ROOM TEMPERATURE TO200℃ (A TYPE) OR 300'℃ (B TYPE)DIMENSION OF WORKING ROOM:450x450x450 MMPID AUTO ADJUS

Falling Hammer Impact Tester SKZ148BUsing Double tube structure, Mainly consists: workbench, Prevent secondary impact mechanism, Hammer, Lifting mechanism, Automatic drop hammer mechanism, Motor, reducer, Electric control box and StandWidely used in a variety of plastic pipe impact resistance of measurement, and also for plates, profiles measured impact. StandardISO 3127, MT-558, ISO 4422 Technical parametersMaximum impact height2000mmHeight positioning error≤ ± 2mmHammer weight0.25 ~ 10.00Kg (0.125Kg / per increment)Optional 15.00KgHammerD25, D90Lift hammer modeAuto (also can hand t

Used to test product packaging for damage and evaluate impact resistance and the transport handling process; mostly used to ensure that product packaging can withstand the circumstances of transport capacity and hence enhance and optimize packaging design.Standard:ISO2248, JISZ0202-87Qualities:With a digital height indicator and height tracking decoder, a single wing drop tester may perform a free drop test of the package's surface, angle, and edge.

Falling ball impact tester is suitable for all kinds of plastic sheet impact test. Standard: ASTM D639-81(1985): STANDARD methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball(falling ball) Working principle:On the lift beams, equipped with a control device for controlling the falling ball, release the ball, the impact of the sample, so that to achieve the purpose of testing. Impact energy can be calculated according to the weight and height of the ball.