Analytical Electronic Balance SKZ-A 1.Using high-precision electromagnetic force balance sensor, more accurate, faster response, less fault.2.Weighing faster, and speed adjusted3. Weight units can be converted4. With counting function5. With Tared, cleared, accumulated, overloaded, under load display, fault alarm6. Built-in RS-232 interface, with the printer, computer connected ParametersModel SKZ-A1004SKZ-A 1104SKZ-A 1204SKZ-A 2004SKZ-A 2104SKZ-A 2204Max.
Contact Now
SKZ-C Precision Electronic BalanceFeature* Stainless steel weighing pan* Tare, counting function* LCD wide viewing angle* g, oz, ct unit conversion* Minimum scale weighing*Battery built-in*Windshield (optional)* RS232 interface (optional)Technical ParametersModel SKZ-C1102SKZ-C2102SKZ-C3102SKZ-C5102SKZ-C11002Max capacity 110g210g310g510g1100gResolution 0.01gPan sizeΦ130 mmRepeatability±0.02gLinearity error±0.03gStable time ≤3 secWorking temperature 17.5℃～22.5℃VoltageAC220V /DC6VCalibration External calibrationNet weight 1.5kgGross weight 2.5kgDimension 270*195*65mmPackage size 330*230*135
Contact Now
Digital Density Balance For Gold K Value SKZ400To test density of solid, liquid, powder, water-absorbent sample and Gold K value (A) Feature: 1. High-precision sensor, impact resistance, anti-overload, to ensure weighing accuracy and stability.2. Built-in rigorous test and calculation procedures, direct display density, without manual conversion.3. Aluminum shell, to enhance the anti-static balance anti-interference ability.4. High contrast LCD liquid crystal display, clear and intuitive readings.5.
Contact Now
Digital Density Balance for Emulsions Chemical Solution SKZ300EApplicationsDirect readings, with temperature compensation, and Solution compensation, more humanized operation, suitable for onsite operations.For density determination of Chemical solution, additives, suspensions, emulsions, dispersions, homogeneous type solution, mouthwash, pharmaceutical, and other high viscosity, suspensions, emulsions, colloidal liquid Features1.Direct reading density of liquid, which density> 1 or <12.
Contact Now
High and low temperature test chamber is one of the climate simulation chambers for the assessment of various electronic products, test at high temperature, low temperature environment.Features:1.Unique balance thermostat, high precision, high temperature stability control.2.Temperature controller with high precision, high stability, PID self-tuning, LED visual display, to ensure precise control of equipment. Equipment with over-temperature3.
Contact Now
Electronic Brightness Meter SKZ102ABrightness Meter is widely applied in paper and cardboard, pulp, cotton and fabric, plastic, ceramic and porcelain enamel, amylum, construction material, chemical industry, salt making and other testing department that need to test whiteness.Function:1. Test R457 or ISO Brightness.2. Analysis if it contains fluorescent whitening agent and determination of reflection fluorescence.produced by white fluorescent, that is, degree of whitening.3. Test the brightness value of Y10, Ie, the green light diffuse reflectance factor Ry.4.
Contact Now
Digital Density Balance For Solid Rubber Grain SKZ300A Direct readings, with temperature compensation, and Solution compensation, more humanized operation, suitable for onsite operations.For density determination of rubber, plastic, wire and cable, electrical appliances, sports equipment, tires, glass products, hard alloy, powder metallurgy, magnetic materials, seals, ceramics, sponge, EVA materials, foam materials, alloys, friction materials, New materials, battery materials.Features1. Direct reading density and volume of solid, particles
Contact Now
SKZ1053 Automatic Thermo GravimetricAnalysis Tga PriceThermo gravimetric evaluation (TG, TGA) is to examine the exchange of pattern exceptional with temperature or time in the technique of heating and regular temperature, the reason is to learn about the thermal balance and composition of the material.Widely used in the lookup and development, procedure optimization and excellent manage of plastics, rubber, coatings, pharmaceuticals, catalysts, inorganic materials, steel substances and composite substancesController and software program advantages:1.
Contact Now
Product DescriptionDigital Textile Thickness Gauge SKZ185 Used to thickness determination for a variety of woven fabrics, knitted fabricsStandard: GB/T3820, FZ/T01003, ISO5084/9073/9863, ASTM D1777.Features:1. Digital display, with the adoption of electric elevating system, static balancer with a pulley, automatic timer and an electronic dial indicator for reading display.2. Using wear-resistant agate bearing is used as the guider and the rolling bearings are adopted for other transmission countershafts.3.
Contact Now
Designed according to GB/T1540-1989, ISO535 (Cobb paper and cardboard absorbency method), which is used to test the absorbency of paper and cardboard, but not applied to evaluate the writing capability of paper and cardboard.Technical parameters:Metal cylinder inside area100±0.2cm², height: 50mmAbsorbency paper200~250g/m²Absorbency speed75mm/10minSmooth metal rollerwidth:200±0.5mm, weight:10±0.5kgDimension390×280×410 (mm)Weight 25kgOptional Balance: accuracy 0.001g, measure range 500gStopwatch: 1sGlass graduate: 100ml Cobb sample cutter
Contact Now
SKZ1053 High Pressure Automatic Thermogravimetric Analysis LabThermo gravimetric evaluation (TG, TGA) is to look at the exchange of pattern high-quality with temperature or time in the manner of heating and consistent temperature, the motive is to find out about the thermal balance and composition of the material.Widely used in the lookup and development, procedure optimization and satisfactory manipulate of plastics, rubber, coatings, pharmaceuticals, cat
Contact Now
Introduction to H2 gas detectorThe SKZ1050-H2 hydrogen gas detector is mainly used in workplaces where hydrogen gas is present or may occur, such as the electronic packaging industry, food processing industry, metallurgical industry, and other fields. With the increasing emphasis on safety production, equipping gas detectors in places where toxic and harmful gases occur is an issue that cannot be ignored.
Contact Now
Introduction to Gas DetectorsThe SKZ1050 hydrogen gas detector can be used in the electronic packaging industry because hydrogen gas is mainly used in gas welding. Hydrogen gas detectors can also be used in the metallurgical industry, where hydrogen and copper oxide react to extract purer copper raw materials.Function1. Monitoring of the environment, or the attention of GAS in a constrained house and supply an alarm2. With self-check function, zero calibration function, so that fuel monitoring extra correct and reliable3.
Contact Now
Edge Crush Sample CutterCorrugated fiberboard Edge Crush Test/adhesive sample cutterSample size25mm×100mm (ECT), 25mm×80mm (adhesive)Result error±0.5mmMaximum length220mmMaximum thickness18mmDimension430mm×380mm×200mmWeight 22kg
Contact Now
SKZ1013 Automatic surface tension MeterProgrammed surface tensiometer, comprised of high exact and stable power estimation framework, microcomputer control framework, platinum plate (ring) estimation gadget, is conservative in plan, basic and dependable in structure, simple in activity (programmed/manual).
Contact Now
M510T Orp MeterFeatures:4.3-inch color LCD touchscreen with high contrast.Features offered by an intelligent operation system include data management, log management, electrode management, user administration, calibration management, method management, and more.Auto, timed, and continuous reading are all possible with the multi-reading feature.Accurate findings are ensured by automatic or manual temperature correction.The measurement endpoint is sensed and locked by the auto-hold feature.1000 sets of data storage for every parameter (compatible with GLP).Utilizing the data analysis featur
Contact Now
To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(cm3/10min) and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, polypropylene, ABS resin and poly-formaldehyde resin, etc, whose melt temperature are lower, widely applied to the fields of plastics materials, product, petrochemical.Standards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplas
Contact Now
It is applicable in testing the leak capability of soft packaging, semi-rigid package, rigid packaging in food, beverage, pharmacy, etc industry.
Contact Now
Standard: ISO1133 Feature:1. LCD display, time, temperature and sample times can be set.2. Built-in printer 3. Automatic cutting4. MFR test item Technical parameters:Test methodMFR (unit: g / 10min)Temperature rangeroom temperature ~ 300 ℃Temperature accuracy± 0.5 ℃Temperature Resolution0.1 ℃Measuring range0.1 ~ 300g / 10min (MFR)load3.187 ~ 211.82N is divided into eightBarrel diameterф9.55mm ± 0.025mmDie apertureΦ2.095 ± 0.005mmPowerAC220V±10% 50Hz 1kWDimension300mm×400mm×500mmWeight 35kg
Contact Now
Two directions Vibration tester SKZ126CAny product in process of transit, use, preservation will produce shock, vibration, which may cause seriously affecting and unnecessary economic losses, in order to avoid this situation, must know in advance the components resistant to vibration life. Technical parameters:Vibration directionvertical, horizontalPlatform body size500*500mmMaximum test load100kgVibration machine power2.2KWSupply voltage220V + 20%Time controlAny time can be set (seconds)Maximum current10AAmplitude0 to 5 mmMaximum acceleration0-20gAccuracy Displayed to 0.01Hz, 0.1Hz
Contact Now
Laboratory Pulp Standard Fiber Disintegrator Wet DisintegrationLaboratory Pulp Disintegrator (also known as standard fiber Disintegrator, standard fiber stirrer), Suitable for laboratory wet disintegration of pulp: the disintegration is to separate the interwoven fibersin water after mechanical processing, and meanwhile to maximum remain fiber original structure properties unchanged, in order to ensure the experiment to obtain reliable data, using the original scientific research and production of effective, economy. Standards:ISO5263, JIS-P8220, TAPPI-T205Te
Contact Now
SR Beating Pulp Tester SKZ115Schopper-Riegler-This instrument is appropriate for checking out a number suspensions with SR much less than 100 ° C.Product Features:1. hydraulic stress shape with stainless steel2. confirms to Standard ISO 3332-1982 and ISO5267/13. filters’s fabric is phosphor bronze, with its working region 100cm2Specifications:Range0-100°SRMinimum scale1°SRTemperature of distilled water20±0.5 ℃Volume of distilled water1000 ml
Contact Now
For measuring the unvulcanized rubber characteristics to identify the optimum cure time.Feature Imported intelligent digital temperature controller, easy adjust settings, a wide range of temperature control, high control accuracy, stabilityStandard:ASTM D5289, ISO6502, T30,T60,T90.Technical parameters:Temperature rangeroom temperature ~ 300 ℃Warming time≤ 15minTemperature Resolution0 to 200 °C: 0.1 °C0 to 300 °C: 1 °C.Temperature fluctuation≤ ± 0.5 °C (after feeding)Torque range0N.m ~ 10N.mTorque display resolution0.001N.mMaximum test time120min (modify time during testing)Swing angle± 0.5 ° (
Contact Now
SKZ132 GB/T 1232 GB/T 1233 Raw rubber or rubber Mooney ViscometerUsed to Raw rubber or rubber compound for the determination of Viscosity, scorch and curing indexStandardsASTM D1646,ISO 289,JIS K6300,GB/T 1232,GB/T 1233Feature of Control Software: 1. Unit of options: kgf-cm, lbf-in Nm, the dN-m, the MV;2. Test data: contains the Mooney viscosity, scorch various data;3. Test curve: Mooney viscosity curve, Mooney scorch curve, temperature curve of the upper and lower mold4. Modify the time during testing5. The test data can be saved automatically6.
Contact Now
