Edge Crush Sample CutterCorrugated fiberboard Edge Crush Test/adhesive sample cutterSample size25mm×100mm (ECT), 25mm×80mm (adhesive)Result error±0.5mmMaximum length220mmMaximum thickness18mmDimension430mm×380mm×200mmWeight 22kg
Contact Now
Crush Tester is used to do the Ring Crush test, Edge Crush Test, Flat Press Test, Adhesive Strength Test, and Paper Tube Compress Test.We also have the accessories for its each test. Standards:ISO 3070, ISO 12192-2011, ISO 7263-2011, ISO 3035-2011 Feature：1. Microprocessor control, automatically carry the test according to testing requests. 2. Protect press sensor through the protection switch for over- loading. 3. Analyzing the group of testing data and to show the maximum, minimum, average, 4.
Contact Now
SKZ112-3 Corrugated fiberboard Flat Crush Test sample cutterSample area64.5cm2 , 32.2cm2Result error±0.5cm2Sample thickness≤7mmWeight 2.5kg
Contact Now
Ring crush Sample CutterSample cutter for RCT, Sample length: 152 mm, Sample width: 12.7 mmSample length152 mmSample width12.7 mmTwo length sides parallelism＜0.015mmSample thickness(0.1～1.0)mmDimension 570×190×368(mm)Weight 20KG
Contact Now
Laboratory Paper GSM Tester SKZ114CIt is the sample cutter for the test of all kinds of paper grammage and slice .The cutter conforms to the standard of QB/T1671—98. Technical parameters:Area100Cm2Specimen diameterΦ112.8±0.05mmSpecimen thicknesspaper: 0.1-1.0 (mm), cardboard: single wall <0.6mmDimension 270×260×405 (mm)Weight 15kg Structure and operationStructure: base, rack, gear, rack, upper edge and lower edge, specimen baffles, received board and operating handle.
Contact Now
Used to test the product packaging by the fall of the damage, and assessment of transport handling process, impact resistance, mainly to meet the product packaging to withstand the conditions of transport capacity, so as to improve and perfect the packaging design. Standard: ISO2248, JISZ0202-87 Features:1 single wing drop tester to do free drop test of the package surface, angle, edge, with digital height indicator and height tracking decoder, which can accurately give the product drop height, and the pre-set drop height error of less than 2%, or 10 mm.2 single wing drop test machin
Contact Now
High Quality Concora Medium Fluter (CCT, CMT) SKZ113To determinate of flat crush strength of corrugated paper when pressed standard waveform (i.e., from the flute corrugated base paper), comply with standard: ISO7263-1985: corrugating medium – Determination of flat crush resistance after laboratory fluting.Feature: 1.Using single-chip microprocessor control technology, Precision temperature controller
Contact Now
Used to test product packaging for damage and evaluate impact resistance and the transport handling process; mostly used to ensure that product packaging can withstand the circumstances of transport capacity and hence enhance and optimize packaging design.Standard:ISO2248, JISZ0202-87Qualities:With a digital height indicator and height tracking decoder, a single wing drop tester may perform a free drop test of the package's surface, angle, and edge.
Contact Now
SKZ1018B Volumetric Karl Fischer TitrationIt is auto-analyzer used Karl Fischer titration method,determination moisture content. Standards:ISO 10337,ASTM D 1744, ISO 760 , ASTM E203Features:1. New pace drop function, use computerized manage electrode polarization voltage drop speed, measure a pattern requires solely tens of seconds2. Additional cutting-edge meter makes the titration procedure extra intuitive3.
Contact Now
Cotton Polyester Linen Velvet Moisture AnalyzerIt is compatible with acrylic, polypropylene fiber, cotton, polyester, linen, velvet, and wool.PRINCILE HIGH FREQUENCYTESTING THAT IS NOT DESTRUCTIVEDigital LCD display.RANGE OF MEASUREMENT: 0–40%50 mm is the scanning depth.TINY SIZESIMPLE TO TRANSPORT.FIT FOR USE IN THE FIELD PACKING AND TRANSPORTATIONevery details will be checked to assure the productUPS,FedEx Express,TNT,EMS,aramex,DHL WORLDWIDE EXPRESSProfile of the CompanyA highly accurate moisture measuring device with widespread use in many different industries is the cutting-edge SKZ
Contact Now
Cotton Yarn Wool Yarn Textile Moisture AnalyzerIdeal for measuring wool and cotton yarnRANGE OF MEASUREMENT: 0-90%RESULTS: 0.1%LENGTH OF PINS: 600 mmDIGITAL DISPLAY, or LCD PACKING AND TRANSPORTATIONevery details will be checked to assure the productUPS,FedEx Express,TNT,EMS,aramex,DHL WORLDWIDE EXPRESSProfile of the CompanyBased on cutting-edge technology, the SKZ moisture meter is a highly accurate moisture measuring device that finds extensive application across multiple sectors. The features of the moisture meter are as follows:1.
Contact Now
Leak Tester is a kind of tester that use compression air to produce negative pressure by vacuum device to test the seal capability and processing technique of soft plastic packaging material in food and pharmaceutical industry. It also can test the specimen which has done the drop and compression test. Standards GB/T15171-94 (the Seal Testing Method for soft packaging).
Contact Now
SKZ144 Rubber Vicat Softening Point Tester used to calculate the Vicat softening and heat distortion temperatures of polymer materialsCharacteristic1.Using a temperature controller to set the temperature and a meter to measure distortion.2.
Contact Now
Burst tester is the simple instrument for checking out the anti-bursting diploma of paper or cardboard, the usage of Mullen check methods. ApplicationIt is used to decide a range of paper and no longer extra than 2000kpa monolayer of skinny cardboard, or a range of single and multi-layer cardboard and corrugated cardboard can additionally be used to notice silk cotton and different non-paper products. StandardsISO2759, ISO 2758. PrincipleIt adopt
Contact Now
SKZ129B DIN Abrasion Tester DIN AbraderStandard ISO4649, DIN 53516Technical parameters:Sample load2.5N, 5N,10NStroke40m or 20mRoller speed40 ± 1r/minRoller diameterФ150 ± 0.2mmRoller length460mmSample dia.Ф16 ± 0.2mmPowerAC220V ± 10% 50HzDimension700mm × 340mm × 300mmWeight63kgEXCELLENT PERFORMANCE,SUPERB TECHNOLOGYStainless steel rollerAnti-corrosion and anti-rustThe operation interface is simple and clearStandard: lS04649, DIN 53516PRODUCT DISPLAYSKZ129B is suitable for wear testing ofelastic materials, rubbertires, conveyor belts, soles, soft synthetic leather, leather andother materials, w
Contact Now
Automatic Carton Stiffness Tester SKZ105BThe tester is used to evaluate the stiffness and resiliency of cardboard by international Taber method.Feature1. 5.7in LCD, real-time display stiffness value and curves2. Automatic zero adjustment.3. Display memory, statistics and print of test results4. The angle can be set between (1 ~ 90) °.5. Test time is within a predetermined range (3s ~ 35s) arbitrarily set.6.
Contact Now
IGT Printability Tester SKZ1032Printability Tester is a most basic designed for paper and paperboard printing picking printability test development of computer process control apparatus. Applicable to all kinds of offset, letterpress and gravure paper and cardboard printing simulation test. Equipped with a high speed ink refilling equipment, a standard scale, aluminum printing plates, wrapping paper.StandardsISO3782, GB/T2679.15, QB/T1058,TAPPI 514 and 575, SCAN P 63:90 Feature: ① the control system accurate.
Contact Now
Ink Absorption Tester SKZ308Ink absorbency tester is the determination of paper or cardboard in a specific time and area to absorb standard ink performance. Technical parameter:Speed15.5 ± 1.0cm / minInking platen opening area20 ± 0.4cm2Inking platen thickness0.1mmInk absorption timeAutomatic control120 ± 5sPower220V ± 10% 50Hz, 90WDimensions530 × 318 × 276mmWeight33Kg
Contact Now
Lab Vibration Tester SKZ126AThis tester is applicable to toys, electronics, furniture, gifts, ceramics, packaging and other products to simulate transport tests, accords with the U.S.
Contact Now
SKZ128A Durometer Hardness Tester For RubberA shore hardness tester is used to determine the hardness of vulcanized rubber and plastic.The hardness head has been mounted on the stand.
Contact Now
Hydrostatic/Burst Tester is used to determine the long-term hydrostatic strength and instant blasting of PVC,PE,PPR,ABS and other plastic pipes. Standards: ISO1167-2006, ASTMD1598-2004, ASTMD1599, ISO9080, CJ/T108, ASTMF1335. Mainframe1.It is controlled both by PC and “Precision Pressure Controlling Unit”.2.It has LCD screen3.Every station controls separately.
Contact Now
SKZ105B Paper Carton Taber Bending Stiffness Tester MachineFeature 1. 5.7in LCD, real-time display stiffness value and curves2. Automatic zero adjustment.3. Display memory, statistics and print of test results4. The angle can be set between (1 ~ 90) °.5. Test time is within a predetermined range (3s ~ 35s) arbitrarily set.6.
Contact Now
SKZ128A Shore A Hardness TesterThe shore hardness tester is used to measure the hardness of vulcanized rubber and plastic. The hardness head is mounted on a stand, but it can also be removed for spot testing.
Contact Now
Product DescriptionLab Mace Snagging Tester SKZ168 To determine the snagging resistance of fabrics by Mace test method.Standards: GB/T11047-89, ASTMD3939, JISL1058Features:1. 4 testing positions for fast test, time-saving and stability.2. Digital display, rotary motor, chain wheel, aluminum alloy drum, mace, fixed guide rod, adjusting guide rod and counter on the control panel.3.
Contact Now
