Edge Crush Sample CutterCorrugated fiberboard Edge Crush Test/adhesive sample cutterSample size25mm×100mm (ECT), 25mm×80mm (adhesive)Result error±0.5mmMaximum length220mmMaximum thickness18mmDimension430mm×380mm×200mmWeight 22kg
Contact Now
Crush Tester is used to do the Ring Crush test, Edge Crush Test, Flat Press Test, Adhesive Strength Test, and Paper Tube Compress Test.We also have the accessories for its each test. Standards:ISO 3070, ISO 12192-2011, ISO 7263-2011, ISO 3035-2011 Feature：1. Microprocessor control, automatically carry the test according to testing requests. 2. Protect press sensor through the protection switch for over- loading. 3. Analyzing the group of testing data and to show the maximum, minimum, average, 4.
Contact Now
Ring crush Sample CutterSample cutter for RCT, Sample length: 152 mm, Sample width: 12.7 mmSample length152 mmSample width12.7 mmTwo length sides parallelism＜0.015mmSample thickness(0.1～1.0)mmDimension 570×190×368(mm)Weight 20KG
Contact Now
SKZ112-3 Corrugated fiberboard Flat Crush Test sample cutterSample area64.5cm2 , 32.2cm2Result error±0.5cm2Sample thickness≤7mmWeight 2.5kg
Contact Now
High Quality Concora Medium Fluter (CCT, CMT) SKZ113To determinate of flat crush strength of corrugated paper when pressed standard waveform (i.e., from the flute corrugated base paper), comply with standard: ISO7263-1985: corrugating medium – Determination of flat crush resistance after laboratory fluting.Feature: 1.Using single-chip microprocessor control technology, Precision temperature controller
Contact Now
SKZ144 Rubber Vicat Softening Point Tester used to calculate the Vicat softening and heat distortion temperatures of polymer materialsCharacteristic1.Using a temperature controller to set the temperature and a meter to measure distortion.2.
Contact Now
SKZ182A Crease Recovery Tester Used for testing fabric recoverability after being creased.Standard: ISO2313, AATCC66 M&S.Feature:
1.Shade-black-box design, rotary-Position
2.Pressure increasing and relief manually controlled , stepper motor flap
3.CCD imaging, dynamic and static images processing
4.A variety of charts and data statistic, analysis, storage and output
5.Built-in electrical angle measuring device by computer software, the results can be amended in accordance with imaging data to process the complex situation of testingWarranty1 yearCustomized supportOEMBrand NameSK
Contact Now
Automatic Carton Stiffness Tester SKZ105BThe tester is used to evaluate the stiffness and resiliency of cardboard by international Taber method.Feature1. 5.7in LCD, real-time display stiffness value and curves2. Automatic zero adjustment.3. Display memory, statistics and print of test results4. The angle can be set between (1 ~ 90) °.5. Test time is within a predetermined range (3s ~ 35s) arbitrarily set.6.
Contact Now
Hot Selling Ultraviolet Protection Tester For testing textiles UV transmittance and UV protection performance, can be directly measured ultraviolet protection factor UVA, UVB, UPF.Standards AATCC 183, AS/NZS 4399, BS 7914 PREN13758.Feature 1. HERAEUS deuterium lamp2. Ultraviolet photoelectric sensor, can measure the fluorescent sample.3.
Contact Now
Lab Vibration Tester SKZ126AThis tester is applicable to toys, electronics, furniture, gifts, ceramics, packaging and other products to simulate transport tests, accords with the U.S.
Contact Now
SKZ144 Vicat Softening Temperature Tester Used to measure polymer materials' Vicat softening and heat distortion temperatures. Feature 1.Setting the temperature with a temperature controller and measuring distortion with a meter.2.The specimen stand has an automated up/down motion and can test three specimens simultaneously.Standard:ASTM-D1525, ASTM-D648, DIN53460,DIN53461,ISO-306,ISO-75Technical parameters: Temperature rangeroom temperature~350℃Heating speed(12±1)oC/6min[(120±10)oC/h](5±0.5)oC/6min[(50±5)oC/h]Max temperature error±0.1℃Measuring range of distortion0-1mmMeasu
Contact Now
SKZ128A Durometer Hardness Tester For RubberA shore hardness tester is used to determine the hardness of vulcanized rubber and plastic.The hardness head has been mounted on the stand.
Contact Now
Leak Tester is a kind of tester that use compression air to produce negative pressure by vacuum device to test the seal capability and processing technique of soft plastic packaging material in food and pharmaceutical industry. It also can test the specimen which has done the drop and compression test. Standards GB/T15171-94 (the Seal Testing Method for soft packaging).
Contact Now
Used to test the product packaging by the fall of the damage, and assessment of transport handling process, impact resistance, mainly to meet the product packaging to withstand the conditions of transport capacity, so as to improve and perfect the packaging design. Standard: ISO2248, JISZ0202-87 Features:1 single wing drop tester to do free drop test of the package surface, angle, edge, with digital height indicator and height tracking decoder, which can accurately give the product drop height, and the pre-set drop height error of less than 2%, or 10 mm.2 single wing drop test machin
Contact Now
Laboratory Paper Dust Tester SKZ116 The tester is applied to test the dust of paper and cardboard. The parameters and performance conform to the standard of GB/T1541-1989 (Tappi T 437 om-1985) Technical parameters:Light source20W fluorescent lampIrradiation degree60°Working platformefficient area 0.0625 m², rotating 360°Standard dust image0.05-5.0(mm²)Dimension750×350×500 (mm)Weight12.5 kg
Contact Now
SKZ128 Digital Shore Hardness Tester Plastic and rubber that have been vulcanized are tested for hardness using a shore hardness tester. The stand holds the hardness head in place. To perform spot testing, you can also remove the head from the stand.
Contact Now
Product DescriptionLab Manual Yarn Twist Tester SKZ192C Used for testing the twist nonhmogeneitiy, the twist unevenness, and the twist shrinkage of various yarns and for product quality inspection to eliminate problems in the process.Standards: GB/T2543.1/2 FZ/T10001 ISO2061 ASTM D1422 JIS L1095Features:1. Driving form: By hand operating.2.
Contact Now
SKZ129B DIN Abrasion Tester DIN AbraderStandardISO4649, DIN 53516Technical parameters:Sample load2.5N, 5N,10NStroke40m or 20mRoller speed40 ± 1r/minRoller diameterФ150 ± 0.2mmRoller length460mmSample dia.Ф16 ± 0.2mmPowerAC220V ± 10% 50HzDimension700mm × 340mm × 300mmWeight63kgEXCELLENT PERFORMANCE,SUPERB TECHNOLOGYStainless steel rollerAnti-corrosion and anti-rustThe operation interface is simple and clearStandard: lS04649, DIN 53516PRODUCT DISPLAYSKZ129B is suitable for wear testing ofelastic materials, rubbertires, conveyor belts, soles, soft synthetic leather, leather andother materials, wi
Contact Now
IGT Printability Tester SKZ1032Printability Tester is a most basic designed for paper and paperboard printing picking printability test development of computer process control apparatus. Applicable to all kinds of offset, letterpress and gravure paper and cardboard printing simulation test. Equipped with a high speed ink refilling equipment, a standard scale, aluminum printing plates, wrapping paper.StandardsISO3782, GB/T2679.15, QB/T1058,TAPPI 514 and 575, SCAN P 63:90 Feature: ① the control system accurate.
Contact Now
Benchtop Ph Tester PH100BGENERAL FEATURESLCD display screen, 6.0 inches.Reset feature automatically resumes all settings back to factory default options.IP54 waterproof.1-2 points calibration with Standard Recognition.Manual temperature compensation ensures accurate results IncludesE-201F pH composite electrodeNIST pH standard solution(4.01, 7.00, 10.01) , 50ml/vialelectrode standPRODUCT SPECIFICATIONSModelPH100BParameterspH/mVpHRange0.00 to 14.00 pHResolution0.01pHAccuracy±0.01 pHCalibration PointsUp to 2Standard RecognitionNIST buffersmVRange-1800 to 1800 mVResolution1 mVAccuracy±0.1%FS
Contact Now
Ink Absorption Tester SKZ308Ink absorbency tester is the determination of paper or cardboard in a specific time and area to absorb standard ink performance. Technical parameter:Speed15.5 ± 1.0cm / minInking platen opening area20 ± 0.4cm2Inking platen thickness0.1mmInk absorption timeAutomatic control120 ± 5sPower220V ± 10% 50Hz, 90WDimensions530 × 318 × 276mmWeight33Kg
Contact Now
SKZ1031 Laboratory pulp Dewatering dehydrator Tester MachineThe effect of the centrifugal force of 1400r/min high speed rotation, in the pulp water out and reached a certain degree of dry, in order to ensure the reliable data.
Contact Now
Five-point heat-seal Tester (also known as gradient heat seal tester) can be used to determine the heat sealing temperature range , suitable packaging speed, and heat sealing pressure of the plastic film substrate, the flexible packaging composite film, coated paper and other heat sealing composite membrane. It can also work with tensile tester to do heat seal strength test. Structure: Divided into four parts of the air drive system, heat sealing device, temperature control system, time-conditioning systems. 1).
Contact Now
SKZ1017B Five point heat sealing apparatusThe Five-point heat-seal Tester, also known as the gradient heat seal tester, is a versatile tool used to determine various parameters related to heat sealing. It can be used to determine the heat sealing temperature range, suitable packaging speed, and heat sealing pressure of different materials such as plastic film substrates, flexible packaging composite films, coated paper, and other heat sealing composite membranes.
Contact Now
