Auto Pneumatic Bursting Strength TesterDetermination pressure for a variety of fabrics, including knits, woven fabric, non-woven fabric, laminated fabric and other craft-made variety of fabrics, in standard conditions or under wet bursting strength and bursting dilation. Standards ISO13938-2, ASTM D3786, IWS Tm29Test principleThrough the circular clamping the sample holder can be extended in the diaphragm, the gas pressure applied below the diaphragm, the diaphragm and the sample expansion.
Contact Now
SKZ108 Paper Mullen Bursting Strength Testing Meter Tester EquipmentApplicationUsed to determine a variety of paper and not more than 2000kpa monolayer of thin cardboard, or a variety of single and multi-layer cardboard and corrugated cardboard can also be used to detect silk cotton and other non-paper products.PrincipleIt adopts signal transmitting press.
Contact Now
Product DescriptionDigital Bursting Strength Tester SKZ156B Used for testing the burst force and degree of fabrics, non-woven fabrics, leather, When under force in all directions at the same time (elastic diaphragm method).Standards: ISO2960, ISO13938.1-04, ASTMD3786, JIS1018Features:1. Meeting the testing area of 50cm2（Φ79.8mm） 2. Sample clamp support system 3. Supporting on-line communicationProduct ParametersTesting range0-2 Mpa (B type)The min. value0.002MpaTest area50cm2(Φ79.8mm), (B type)Elastic mold-plate size≤2mmThe max. burst length70±0.02mmThe max.
Contact Now
Burst tester is the simple instrument for checking out the anti-bursting diploma of paper or cardboard, the usage of Mullen check methods. ApplicationIt is used to decide a range of paper and no longer extra than 2000kpa monolayer of skinny cardboard, or a range of single and multi-layer cardboard and corrugated cardboard can additionally be used to notice silk cotton and different non-paper products. StandardsISO2759, ISO 2758. PrincipleIt adopt
Contact Now
Burst tester is the basic instrument for testing the anti-bursting degree of paper or cardboard, using Mullen test methods. ApplicationUsed to determine a variety of paper and not more than 2000kpa monolayer of thin cardboard, or a variety of single and multi-layer cardboard and corrugated cardboard can also be used to detect silk cotton and other non-paper products.StandardsISO 2759, ISO 2758. PrincipleIt adopts signal transmitting press.
Contact Now
SKZ108C Bursting Strength Of PaperApplicationUsed to detect a range of paper products and thin cardboard layers with a maximum density of 2000 kpa. It may also be used to detect different types of single and multi-layer cardboard, corrugated cardboard, silk cotton, and other non-paper items.StandardsISO2759, ISO 2758. PrincipleIt uses a button for signal transmission.
Contact Now
Crush Tester is used to do the Ring Crush test, Edge Crush Test, Flat Press Test, Adhesive Strength Test, and Paper Tube Compress Test.We also have the accessories for its each test. Standards:ISO 3070, ISO 12192-2011, ISO 7263-2011, ISO 3035-2011 Feature：1. Microprocessor control, automatically carry the test according to testing requests. 2. Protect press sensor through the protection switch for over- loading. 3. Analyzing the group of testing data and to show the maximum, minimum, average, 4.
Contact Now
Hydrostatic/Burst Tester is used to determine the long-term hydrostatic strength and instant blasting of PVC,PE,PPR,ABS and other plastic pipes. Standards: ISO1167-2006, ASTMD1598-2004, ASTMD1599, ISO9080, CJ/T108, ASTMF1335. Mainframe1.It is controlled both by PC and “Precision Pressure Controlling Unit”.2.It has LCD screen3.Every station controls separately.
Contact Now
Ink Absorption Tester SKZ308Ink absorbency tester is the determination of paper or cardboard in a specific time and area to absorb standard ink performance. Technical parameter:Speed15.5 ± 1.0cm / minInking platen opening area20 ± 0.4cm2Inking platen thickness0.1mmInk absorption timeAutomatic control120 ± 5sPower220V ± 10% 50Hz, 90WDimensions530 × 318 × 276mmWeight33Kg
Contact Now
Product DescriptionBenchtop Fabric Formaldehyde Tester SKZ190B For the rapid determination of formaldehyde content in textiles, by Extraction method.Standards: SN/T2195, ISO14184-1, LAW 112Features:1.Can be controlled by LCD display or PC.2.Automatic spectrum data processing, report printing.3. With function of absorption curve, selected wavelength, absorbance and transmittance.4. Spectrophotometer, automatic test, three samples in one time.5.
Contact Now
SKZ1011 COF Equipment Friction Coefficient Tester Standards:ISO8295, ASTMD1894, TAPPIT816Technical parameters:Dimension of slider63×63 (mm)Weight of slider200±2g (500g)Sample size80×200 (mm)Testing accuracy±0.5%Speed of slider100 mm/minRange0-5NStroke70mm, 150mmPower220V, 50HZDimension400×300×180 (mm)Weight30kgSKZ1011 FRICTON COEFFICIENT TESTERWe welcome customers to contact us for future businessrelationships and mutual success!High qualityproductFast DeliverySpecializedPerfect after-salesfactoryserviceSKZ INTERNATIONAL CO..
Contact Now
Falling Hammer Impact Tester SKZ148BUsing Double tube structure, Mainly consists: workbench, Prevent secondary impact mechanism, Hammer, Lifting mechanism, Automatic drop hammer mechanism, Motor, reducer, Electric control box and StandWidely used in a variety of plastic pipe impact resistance of measurement, and also for plates, profiles measured impact. StandardISO 3127, MT-558, ISO 4422 Technical parametersMaximum impact height2000mmHeight positioning error≤ ± 2mmHammer weight0.25 ~ 10.00Kg (0.125Kg / per increment)Optional 15.00KgHammerD25, D90Lift hammer modeAuto (also can hand t
Contact Now
SKZ144 Vicat Softening Temperature Tester Used to measure polymer materials' Vicat softening and heat distortion temperatures. Feature 1.Setting the temperature with a temperature controller and measuring distortion with a meter.2.The specimen stand has an automated up/down motion and can test three specimens simultaneously.Standard:ASTM-D1525, ASTM-D648, DIN53460,DIN53461,ISO-306,ISO-75Technical parameters: Temperature rangeroom temperature~350℃Heating speed(12±1)oC/6min[(120±10)oC/h](5±0.5)oC/6min[(50±5)oC/h]Max temperature error±0.1℃Measuring range of distortion0-1mmMeasu
Contact Now
Power (KW)4Voltage (V)220Phase1Rated Temperature (℃)1000Empty Furnace heating time (min)≤80Empty Furnace loss power (KW)≤1.8Inner Furnace size (mm)300×200×120Overall Dimensions570×520×550Weight80kg
Contact Now
SKZ144 Rubber Vicat Softening Point Tester used to calculate the Vicat softening and heat distortion temperatures of polymer materialsCharacteristic1.Using a temperature controller to set the temperature and a meter to measure distortion.2.
Contact Now
Product DescriptionDown Filling Power Tester JISL 1903 DigitalUsed to test the feather and down filling power.Measurement accuracy: 0.1mmMeasuring height: 750 mmStandard:IDFB-FP, JIS L1903, BSEN12130JIS L1903(Testing methods for feathers): This Japanese Industrial Standard specifies testing methods for down and feather intended for filled manufactured articles.Product ParameterMeasurement accuracy0.1mmMeasuring height750mmMeasurement speed0-1000mm / min adjustableCylinder diameter288mm, 245mmOptional 290 mm, JISL1903, BSEN12130Measuring pressure plate94.25g, diameter 284 mm68.4g diameter
Contact Now
High Quality Box Compression Tester SKZ121Box Compression Tester is applicable in testing the compression endurance and stacking strength and press standard of corrugated carton. Test items:●Compressive test: to determine the maximum compression strength●Stacking test: to determine the stacking strength test,12 hours, 24 hours●Pressure standards test: testing whether the box reaches the preset compression or deformation of the requirements Standards:ISO2234, ISO2233, ISO2206, ISO12048. ISO2874, ISO2872.
Contact Now
IGT Printability Tester SKZ1032Printability Tester is a most basic designed for paper and paperboard printing picking printability test development of computer process control apparatus. Applicable to all kinds of offset, letterpress and gravure paper and cardboard printing simulation test. Equipped with a high speed ink refilling equipment, a standard scale, aluminum printing plates, wrapping paper.StandardsISO3782, GB/T2679.15, QB/T1058,TAPPI 514 and 575, SCAN P 63:90 Feature: ① the control system accurate.
Contact Now
Product DescriptionLab Manual Yarn Twist Tester SKZ192C Used for testing the twist nonhmogeneitiy, the twist unevenness, and the twist shrinkage of various yarns and for product quality inspection to eliminate problems in the process.Standards: GB/T2543.1/2 FZ/T10001 ISO2061 ASTM D1422 JIS L1095Features:1. Driving form: By hand operating.2.
Contact Now
Lab Vibration Tester SKZ126AThis tester is applicable to toys, electronics, furniture, gifts, ceramics, packaging and other products to simulate transport tests, accords with the U.S.
Contact Now
SKZ1031 Laboratory pulp Dewatering dehydrator Tester MachineThe effect of the centrifugal force of 1400r/min high speed rotation, in the pulp water out and reached a certain degree of dry, in order to ensure the reliable data.
Contact Now
SKZ1017B Five point heat sealing apparatusThe Five-point heat-seal Tester, also known as the gradient heat seal tester, is a versatile tool used to determine various parameters related to heat sealing. It can be used to determine the heat sealing temperature range, suitable packaging speed, and heat sealing pressure of different materials such as plastic film substrates, flexible packaging composite films, coated paper, and other heat sealing composite membranes.
Contact Now
Tumble Dryer For Textile Shrinkage Tester SKZ162-1Used for the drying of fabrics, clothing and other textiles after shrinkage test.Standard: ISO06330 Technical parametersRated dry sample capacity10kgDrying temperatureroom temperature -80 ℃Drum diameter695mmDrum depth435mmRoller volume165LRoller speed50 r /minLifting pieces No. 3 (120 degrees apart)PowerAC220v • 50Hz 5.5 KWDimensions 785 × 960 × 1365mmWeight100Kg
Contact Now
Five-point heat-seal Tester (also known as gradient heat seal tester) can be used to determine the heat sealing temperature range , suitable packaging speed, and heat sealing pressure of the plastic film substrate, the flexible packaging composite film, coated paper and other heat sealing composite membrane. It can also work with tensile tester to do heat seal strength test. Structure: Divided into four parts of the air drive system, heat sealing device, temperature control system, time-conditioning systems. 1).
Contact Now
