SKZ190B Fabric Formaldehyde TesterFor the fast dedication of formaldehyde content material in textiles, through Extraction method.Feature:1.Can be managed through LCD show or PC2.Automatic spectrum facts processing, report printing.4. Spectrophotometer, computerized test, three samples in one time5.
Contact Now
Product DescriptionBenchtop Fabric Formaldehyde Tester SKZ190B For the rapid determination of formaldehyde content in textiles, by Extraction method.Standards: SN/T2195, ISO14184-1, LAW 112Features:1.Can be controlled by LCD display or PC.2.Automatic spectrum data processing, report printing.3. With function of absorption curve, selected wavelength, absorbance and transmittance.4. Spectrophotometer, automatic test, three samples in one time.5.
Contact Now
Lab Fabric Formaldehyde TesterFor te speedy dedication of formaldehyde content material in textiles, by using Extraction method. Standards: SN/T2195 ISO14184-1, LAW 112Features of SKZ190BCan be managed by wayh of LCD show or PC Automatic spectrum records processing, record printing. With feature of absorption curve, chosen wavelength, absorbance and transmittance. Spectrophotometer, automated test, three samples in one time Automatic calibration of 100%T and 0%TTechnical parametersPacking and DeliveryCompany ProfileCertification
Contact Now
I300F Benchtop Ion MeterSupport for USB or RS-232 communication. Reset feature automatically resumes all settings back to factory default options. IP54 waterproof.PRODUCT SPECIFICATIONSModelI300FParameterspH/ISE/Temp.(mV/pX)pHRange-2.00 to 20.00 pHResolution0.1, 0.01 pHAccuracy±0.01 pHmVRange-2000.0 to 2000.0 mVResolution0.1, 0.01 mVAccuracy±0.1 mV or ±0.03% of reading whichever is greaterpXRange-2.00 to 20.00 pXResolution0.1, 0.01 pXAccuracy±0.01 pXCalibration PointsUp to 5ISERange1.000e-9 to 9.999e+9Unitmol/L, mmol/L, g/L, mg/L, μg/L, ppm, ppbResolutionUp to 4 significant digitsAcc
Contact Now
PH200EM Benchtop Ph MeterPRODUCT SPECIFICATIONSModelPH200EMParameterspH/mVpHRange-2.000 to 18.000 pHResolution 0.01pHAccuracy±0.01 pHCalibration PointsUp to 3Standard RecognitionNF buffersmV/ORPRange-1999 to 1999 mVResolution1 mVAccuracy±0.1%FSMeasurementReading ModeAuto Read , ContinuousTemp.
Contact Now
Benchtop Ph Tester PH100BGENERAL FEATURESLCD display screen, 6.0 inches.Reset feature automatically resumes all settings back to factory default options.IP54 waterproof.1-2 points calibration with Standard Recognition.Manual temperature compensation ensures accurate results IncludesE-201F pH composite electrodeNIST pH standard solution(4.01, 7.00, 10.01) , 50ml/vialelectrode standPRODUCT SPECIFICATIONSModelPH100BParameterspH/mVpHRange0.00 to 14.00 pHResolution0.01pHAccuracy±0.01 pHCalibration PointsUp to 2Standard RecognitionNIST buffersmVRange-1800 to 1800 mVResolution1 mVAccuracy±0.1%FS
Contact Now
Product DescriptionLaboratory Fabric Down Proof Tester SKZ174 Testing the penetration resistance to feather and down of all kinds of textile fabrics.To determine the down-proof properties of fabric, rolling box method.Standards: GB/T12705, FTMS191A (Optional rubber ball)Product Features1. Adopts transparent cylinder as rotary box and has interlayer, can efficiently reduce the noise of balls impact the box.2. High performance motor, box rotate smoothly and stably.3. Box can automatically stop when the rotary number reach the preset value.4.
Contact Now
Digital Benchtop Ph Tester For Water PH300FPH300F Features:1. High resolution LCD display, 5.7 inches.2. Multi-reading feature allows auto-read, timed-read and continuous-read.3. Automatic/Manual temperature compensation ensures accurate results.4. Auto-hold feature senses and locks the measurement endpoint.5. Data Storage 500 sets (GLP-compliant).6. Support for USB or RS-232 communication.7. Reset feature automatically resumes all settings back to factory default options.8. 1-5 points calibration with Standard Recognition.9. Selectable pH buffer groups, including NIST, DIN, GB, USA.10.
Contact Now
Product DescriptionLab Benchtop Water Ph Meter Pool Ph Tester PH500T Features:1. Color high contrast LCD touch screen, 7.0 inches.2. Intelligent operating system provides user management, calibration management, method management, data management and other functions.3. Multi-reading function allows automatic, timed and continuous reading.4. Automatic/manual temperature compensation ensures accurate results. 5. 1000 sets of data can be stored for each parameter (GLP compliant). 6. Data analysis function helps users to view, compare and recalculate results. 7.
Contact Now
Lab Fabric Martindale Abrasion And Pilling Tester SKZ165A Used for testing the performance of the wearing resistance, abrasion, appearance change (pilling degree/class) of the textiles and membrane materials.Standards:ASTM D4970,ASTM D4966,ISO12947,JIS L1096,TM112 M&S, FZ/T20020,IWS TM196,ASTM D3886,DIN53863/53865, BS3424/5690,BS EN 388/530,ISO12945-2Test mode: Mode l: Circular specimen with the same material fabric at a given pressure, friction with the Lissajous graphic motion trajectory, can achieve the required speed, evaluating sample pilling.
Contact Now
Used for testing the stiffness of all kinds of woven and knit goods, nonwoven fabrics and coated fabrics, including cotton, wool, silk, linen and chemical fiber, and also of flexible materials such as paper, leather, filmRelevant Standards:ZB WO4003, ISO 9073, ASTM D 1388, ISO9073-7, BS En22313Warranty1 yearCustomized supportOEMPlace of OriginChinaShandongBrand NameSKZWorking patternMicro-computer controlled, infrared stealth slant detecting, liquid crystal display, printing out testing resultsTesting range40.5, 43, 45( adjustable)Extension elongation0.5-20.5cmTesting accuracy0.01 cmSpecimen s
Contact Now
SKZ156B Elmendorf Tear TesterUsed to test the degree and burst force of leather, non-woven textiles, and materials while they are simultaneously under force in all directions (elastic diaphragm method).Standards: ISO2960, ISO13938.1-04, ASTMD3786, JIS1018Features: 1. Meeting the 50cm2 testing area requirements2. Support system for sample clamps3. Facilitating online correspondence Product ParametersTesting range0-2 Mpa (B type)The min. value0.002MpaTest area50cm2(Φ79.8mm), (B type)Elastic mold-plate size≤2mmThe max. burst length70±0.02mmThe max.
Contact Now
Product DescriptionDigital Benchtop Turbidity Meter Turbidimeter TU4000E Application: Surface water, groundwater, domestic drinking water, secondary water supply, swimming pool water, industrial water.General Features1. 7 inch colorful touch screen.2. Tungsten lamp light source met USEPA 180.1 requirement.3. 3 photodiodes to ensure high accuracy.4. 1-8 points calibration using Formazin standards or zero water.5. Autoranging from 0-4000 NTU.6. Data Storage capacity of 1000 sets (GLP-compliant).7.
Contact Now
Auto Pneumatic Bursting Strength TesterDetermination pressure for a variety of fabrics, including knits, woven fabric, non-woven fabric, laminated fabric and other craft-made variety of fabrics, in standard conditions or under wet bursting strength and bursting dilation. Standards ISO13938-2, ASTM D3786, IWS Tm29Test principleThrough the circular clamping the sample holder can be extended in the diaphragm, the gas pressure applied below the diaphragm, the diaphragm and the sample expansion.
Contact Now
SKZ145 Melt Index Tester Mfi TesterFor engineering plastics such as polycarbonate, nylon, and fluorine plastics, whose melt temperatures are higher, as well as fit for plastics tests of polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc., whose melt temperatures are lower, the following parameters must be determined: melt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Char
Contact Now
SKZ1050B Fixed HCHO Monitor Gas Detection Equipment 0-100PPM Formaldehyde CH2O Fixed Gas DetectorFunction 1.Environmental monitoring or GAS pipeline concentration and alarm2.Temperature compensation can be used to create the ideal conditions for varying gas concentration temperatures. 3.It is possible to remotely control infrared devices without having to open the alarm set point, zero calibration, change the address, or do other tasks. SpecificationsGas DetectedCH2ODetection principleElectrochemical principlesSampling MethodWall-mounted, pipeline, flow typeMeasure Range0-1
Contact Now
SR Beating Pulp Tester SKZ115Schopper-Riegler-This instrument is appropriate for checking out a number suspensions with SR much less than 100 ° C.Product Features:1. hydraulic stress shape with stainless steel2. confirms to Standard ISO 3332-1982 and ISO5267/13. filters’s fabric is phosphor bronze, with its working region 100cm2Specifications:Range0-100°SRMinimum scale1°SRTemperature of distilled water20±0.5 ℃Volume of distilled water1000 ml
Contact Now
SKZ145 Melt Flow Rate TesterMelt mass-flow (MFR) (g/10min), melt volume-flow rate (cm3/10min), and the melt density of thermo resin must be determined for engineering plastics, which have higher melt temperatures, such as polycarbonate, nylon, and fluorine plastics; and for fit for plastics tests, which have lower melt temperatures, such as polyethylene, polystyrene, polypropylene, ABS resin, and poly-formaldehyde resin, etc.Standards:ISO 1133-1, ISO 1133-2, GBT 3682.1-2018, ASTM D1238-2013, ASTM D3364-1999 (2011), JJG878-1994, JB/T5456-2016, DIN53735, UNI-5640Product features:1.The control sy
Contact Now
SKZ165 Martindale Pilling TesterUsed to evaluate how well textiles and membrane materials perform in terms of wearing resistance, abrasion, and appearance change (pilling degree/class).Standards:ASTM D4970,ASTM D4966,ISO12947,JIS L1096,TM112 M&S, FZ/T20020,IWS TM196,ASTM D3886,DIN53863/53865, BS3424/5690,BS EN 388/530,ISO12945-2Test mode:Mode 1: Using a circular specimen made of the same material fabric and friction with a Lissajous graphic motion trajectory, the specimen can reach the necessary speed while assessing sample pilling at a certain pressure.
Contact Now
SKZ182A Crease Recovery Tester Used for testing fabric recoverability after being creased.Standard: ISO2313, AATCC66 M&S.Feature:
1.Shade-black-box design, rotary-Position
2.Pressure increasing and relief manually controlled , stepper motor flap
3.CCD imaging, dynamic and static images processing
4.A variety of charts and data statistic, analysis, storage and output
5.Built-in electrical angle measuring device by computer software, the results can be amended in accordance with imaging data to process the complex situation of testingWarranty1 yearCustomized supportOEMBrand NameSK
Contact Now
Lab Textile Ironing Sublimation Color Fastness TesterFeatures and ApplicationsThe instrument is used for the test of fabric color fastness to dyeing, chlorine damage (for resin finished fabrics), bleached cloth yellowness, dispersed dyestuff sublimation fastness and reactive dyestuff water ironing fastness. It is a ideal tester for dyestuff production and dyeing-finishing process in the light and textile industry.
Contact Now
Digital Rubbing Color fastness Tester Crockmeter SKZ159 Use:To determine rubbing color fastness for textiles, knitted fabrics, leather, metal plates of the electro -chemical, printing.Standard:GB/T3920, ISO105-X12, GB/T5712, ISO105-D02Testing mode:Rubbing the sample with a wet and dry rubbing cloth, then judge its discolor and staining situation by the gray sample card.Feature：1. Motor-driven, efficient and low energy consumption.2. Using stainless steel for its crank and other key components.3. Equipped with a rectangular rubbing head 19 × 25.4mm, for velvet fabric.
Contact Now
To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(cm3/10min) and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, polypropylene, ABS resin and poly-formaldehyde resin, etc, whose melt temperature are lower, widely applied to the fields of plastics materials, product, petrochemical.Standards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplas
Contact Now
SKZ1061C Thermal Conductivity Testing Equipment PriceIt can be used for a number of warmth conduction residences of one-of-a-kind kinds of substances testing. Transient Plane Source technique is to learn about the thermal conductivity method, the ultra-modern one, which makes size technological know-how to a entire new level. In the find out about of cloth succesful of speedy and correct size of thermal conductivity for the employer first-class control, fabric manufacturing and laboratory research grant a outstanding convenience.
Contact Now
