Auto Pneumatic Bursting Strength TesterDetermination pressure for a variety of fabrics, including knits, woven fabric, non-woven fabric, laminated fabric and other craft-made variety of fabrics, in standard conditions or under wet bursting strength and bursting dilation. Standards ISO13938-2, ASTM D3786, IWS Tm29Test principleThrough the circular clamping the sample holder can be extended in the diaphragm, the gas pressure applied below the diaphragm, the diaphragm and the sample expansion.
Contact Now
Product DescriptionDigital Bursting Strength Tester SKZ156B Used for testing the burst force and degree of fabrics, non-woven fabrics, leather, When under force in all directions at the same time (elastic diaphragm method).Standards: ISO2960, ISO13938.1-04, ASTMD3786, JIS1018Features:1. Meeting the testing area of 50cm2（Φ79.8mm） 2. Sample clamp support system 3. Supporting on-line communicationProduct ParametersTesting range0-2 Mpa (B type)The min. value0.002MpaTest area50cm2(Φ79.8mm), (B type)Elastic mold-plate size≤2mmThe max. burst length70±0.02mmThe max.
Contact Now
SKZ108C Bursting Strength Of PaperApplicationUsed to detect a range of paper products and thin cardboard layers with a maximum density of 2000 kpa. It may also be used to detect different types of single and multi-layer cardboard, corrugated cardboard, silk cotton, and other non-paper items.StandardsISO2759, ISO 2758. PrincipleIt uses a button for signal transmission.
Contact Now
Burst tester is the basic instrument for testing the anti-bursting degree of paper or cardboard, using Mullen test methods. ApplicationUsed to determine a variety of paper and not more than 2000kpa monolayer of thin cardboard, or a variety of single and multi-layer cardboard and corrugated cardboard can also be used to detect silk cotton and other non-paper products.StandardsISO 2759, ISO 2758. PrincipleIt adopts signal transmitting press.
Contact Now
The Auto-pneumatic Cutter Press is driven by air pressure only. lt is suitable for laboratory to punch every kind of standard specimens from rubber, plastic, leather Standard: ASTM-D412Technical parameters:TypesPNEUMATICMoving distance25mm～100mmWorking platform320 mm×220 mmSpecimen thicknessmaximum 10mmAir pressure0.6MPaDimension380mm×260mm×590mmNet weight40kg
Contact Now
SKZ101-16C Single Yarn Strength TesterFor a variety of fiber and metal filaments dry (wet) tensile test.Standards:ISO5079 , ISO11566Maximum load test200cN, test error: 0.2% (F.S), sensitivity: 0.01cNElongation range≤100mm, Resolution: 0.01mmTest speed1 ~ 200mm / minTest MethodBuilt-in 3 kindsClamping distance10 mm, 20 mmOutputliquid crystal display, print outputPowerAC220V ± 10% 50Hz 100WDimensions1000 × 420 × 460mmWeight30Kg
Contact Now
Burst tester is the simple instrument for checking out the anti-bursting diploma of paper or cardboard, the usage of Mullen check methods. ApplicationIt is used to decide a range of paper and no longer extra than 2000kpa monolayer of skinny cardboard, or a range of single and multi-layer cardboard and corrugated cardboard can additionally be used to notice silk cotton and different non-paper products. StandardsISO2759, ISO 2758. PrincipleIt adopt
Contact Now
Be measured heat sealing temperature range of sealing compound, heat sealing strength, hot package of speed, heat sealing pressure, used for plastic, flexible packaging composite membrane, coated paper, foil. 1. Structure: It contains air drive system, sealing devices, temperature-conditioning systems, time-conditioning systems2. Air-driven system: Including pressure gauges, guide rods, cylinder, pneumatic valve, pressure regulator handles, so on.
Contact Now
Auto Paper Tensile Tester SKZ101AIt is used to test the Tensile strength test of paper and board, It adopts precise auto control and data acquisition system. Feature 1) Color touch screen display.2)The test force can be adjusted in a wide range, stable and effectively.3) Display test force, test speed and displacement at real time.4) It can automatically return to the original position after test.5) With limit position protection, over load protection and over current protect.6).
Contact Now
SKZ129A Auto Akron Abrasion TesterStandard ISO:4661-1:1993, ISO 2481:1988, ISO 471:1983, ISO 1826:1981Technical parameters:Tire suffered force26.7N (2.7kgf)Tire axis rotary speed76±2r/minWheel axis speed33-35r/minAngle between the two axis0°~45°PowerAC220V±10%Dimension600×480×400 (mm)Weight60kgProducts DescriptionSKZ129AAkron Abrasion TesterIS0:4661-1:1993I50 2481:1988IS0 471:1983I50 1826:1981The Angle between therubber wheel shaft and thegrinding wheel can beadjusted to 15°or 25°Stable base, solid structure.durable and not easy to breakHigh quality digital display,display the number of wearre
Contact Now
SKZ107A Elmendorf Tear TesterIt is a specialized tool used to measure the strength of paper tears.
Contact Now
SKZ1017B Five points Heat Seal TesterStructure: Divided into four parts of the air drive system, heat sealing device, temperature control system, time-conditioning systems.1). Air-driven systemIncluding pressure gauges, guide rod, cylinder, pneumatic valve, pressure regulator handle. First pull out the pressure adjustment handle, turn right to increase the sealing pressure, turn left to lower sealing pressure, push the handle towards to the host side after finishing setting the pressure, which can lock the setting values.2). Heat seal device: Including the upper and lower heat sealing rods.
Contact Now
DO400F dissolved oxygen testerGENERAL FEATURESHigh resolution LCD display, 5.7 inches.Multi-reading feature allows auto-read, timed-read and continuous-read. Automatic/Manual temperature compensation ensures accurate results.
Contact Now
High Quality Box Compression Tester SKZ121Box Compression Tester is applicable in testing the compression endurance and stacking strength and press standard of corrugated carton. Test items:●Compressive test: to determine the maximum compression strength●Stacking test: to determine the stacking strength test,12 hours, 24 hours●Pressure standards test: testing whether the box reaches the preset compression or deformation of the requirements Standards:ISO2234, ISO2233, ISO2206, ISO12048. ISO2874, ISO2872.
Contact Now
SKZ1037C/D High Accuracy Digital Rotatory Auto Viscometer MachineFeatures:1. Advanced mechanical design technology, manufacturing technology and microcomputer control technology, accurate data acquisition2. High subdivision drive stepper motor rotation smooth and precise. Choose white backlit display, high brightness LCD display, the data show clearly3. Can display viscosity, speed, sample liquid temperature, percent, rotor number, and the selection of the rotor speed can be measured current maximum range value4.
Contact Now
Digital Internal Plybond Tester SKZ123For testing the Internal Bonding Strength of various paperboards. Standard: TAPPI-UM403.Test principle: the paperboard sample is impact in a certain angle and weight, the energy it has absorbed indicates the internal bonding strength. It could test five samples at one test. The test unit is optional: kg/cm, N/m, J. Feature:1. Mechatronics modern concept design, elegant appearance, easy maintenance.2. Glue pressed hydraulically, the pressure can be adjusted automatically.3.
Contact Now
FEATURESColor High contrast LCD touchscreen, 4.3 inches.Intelligent operation system provides features including user management, calibration management, electrode management, method management, data management, Log Management and etc. Multi-reading feature allows auto-read, timed-read and continuous-read. Automatic/Manual temperature compensation ensures accurate results.
Contact Now
Mechanical Elmendorf Tearing TesterIt is the special instrument for paper tearing strength test. Standard: ISO 1974(paper--tearing strength test method), GB455.1, Technical parameter:parameterindexTest range(10～1000)Mn, Standard arm and Light arm are the standard fittings.Lightest arm special customization according to need.Standard arm(10～1000)mN，degree minimum: 10mNLight arm (10～500)mN, degree minimum: 5mNLightest arm (10～200)mN, degree minimum: 2mN (extra charge)VeracityErrorMaximum range20%～80% ±1%, out range±0.5%FSRepeat errorMaximum range20%～80% ≤1%, out range
Contact Now
SKZ145 ISO1133 Manufacture Auto LCD Melt Flow Indexer Factory Melt Flow IndexerStandards:ISO 1133-1:2011 Plastics — Determination of the soften mass-flow price (MFR) and soften volume-flow price (MVR) of thermoplastics —Part 1:Standard methodISO 1133-2:2011 Plastics — Determination of the soften mass-flow charge (MFR) and soften volume-flow charge (MVR) of thermoplastics —Part 2: Method for substances touchy to time temperature records and/or moistureASTM D1238-2013 "Standard Test Meth
Contact Now
Hydrostatic/Burst Tester is used to determine the long-term hydrostatic strength and instant blasting of PVC,PE,PPR,ABS and other plastic pipes. Standards: ISO1167-2006, ASTMD1598-2004, ASTMD1599, ISO9080, CJ/T108, ASTMF1335. Mainframe1.It is controlled both by PC and “Precision Pressure Controlling Unit”.2.It has LCD screen3.Every station controls separately.
Contact Now
Products DescriptionHot Selling Yarn Length Tester SKZ193BApplications:By the winder, the sample yarn on the through tube can be winded into skein
yarns with a reel and the reeling tension be measured. It is used to measure a yarn
length, designed for yarn linear density (or count) measurement and skein yarn
strength test. Standard:ISO 2060.2, ISO2060, ASTM D1907, GB4743- 95Features: 1.Timing cog belt of direct transmission, no-lap skid. 2.Countint by optocoupler.
Contact Now
Digital Ph Tester PH310TProduct Features1. Color High contrast LCD touchscreen, 4.3 inches.2. Multi-reading feature allows auto-read, timed-read and continuous-read.3. Automatic/Manual temperature compensation ensures accurate results.4. Auto-hold feature senses and locks the measurement endpoint.5. Data capacity of up to 500 sets for each parameter (GLP-compliant).6. Support for USB communication.7. Auto-power off feature effectively extends the battery service life.8. Reset feature automatically resumes all settings back to factory default options.9. IP65 waterproof.
Contact Now
Digital Ion Tester Ph Meter I310TGENERAL FEATURES1. Color High contrast LCD touchscreen, 4.3 inches.2. Multi-reading feature allows auto-read, timed-read and continuous-read.3. Automatic/Manual temperature compensation ensures accurate results.4. Auto-hold feature senses and locks the measurement endpoint.5. Data capacity of up to 500 sets for each parameter (GLP-compliant).6. Support for USB communication.7. Auto-power off feature effectively extends the battery service life.8. Reset feature automatically resumes all settings back to factory default options.9. IP65 waterproof.
Contact Now
Crush Tester is used to do the Ring Crush test, Edge Crush Test, Flat Press Test, Adhesive Strength Test, and Paper Tube Compress Test.We also have the accessories for its each test. Standards:ISO 3070, ISO 12192-2011, ISO 7263-2011, ISO 3035-2011 Feature：1. Microprocessor control, automatically carry the test according to testing requests. 2. Protect press sensor through the protection switch for over- loading. 3. Analyzing the group of testing data and to show the maximum, minimum, average, 4.
Contact Now
