ASTM-D 1054-66 Rubber Impact Resilience TesterTechnical parameters:Diameter of impactorФ15mmSpecimen specificationФ29mm×12.5mmImpact weight0.35-0.1kgImpact speed1.4+0.6m/sStrain energy density351+112kJ/m³Resilience value error±0.5%Dimension320mm×200mm×360mmWeight20kgSKZ136IMPACT RESILIENCE TESTEREXCELLENT PERFORMANCE,SUPERB TECHNOLOGYMOQ 1 pCFactory direct saleStandard:1S04662,ASTM-D 1054-66,DIN 535125KPRODUCT DISPLAYNDUSTERubber lmpact Resilience TesterThe instrument is the pendulumimpact resiliency tester to measure the resilience value of vulcanized rubbelSuitable for metallurgy, constructi
Contact Now
SKZ136 Rubber Impact Resilience Tester DIN 53512 MeterTechnical parameters:Diameter of impactorФ15mmSpecimen specificationФ29mm×12.5mmImpact weight0.35-0.1kgImpact speed1.4+0.6m/sStrain energy density351+112kJ/m³Resilience value error±0.5%Dimension320mm×200mm×360mmWeight20kgSKZ136IMPACT RESILIENCE TESTEREXCELLENT PERFORMANCE,SUPERB TECHNOLOGYMOQ 1 pCFactory direct saleStandard:1S04662,ASTM-D 1054-66,DIN 535125KPRODUCT DISPLAYNDUSTERubber lmpact Resilience TesterThe instrument is the pendulumimpact resiliency tester to measure the resilience cost of vulcanized rubbelSuitable for
Contact Now
SKZ136 Rubber Impact Resilience TesterRubber Impact Resilience Tester is the pendulum impact resiliency tester with energy 0.5J and applied to measure the resilience value of vulcanized rubber with hardness 30—85IRHD. It measures up to ISO4662, ASTM-D 1054-66,DIN 53512. Rubber Impact Resilience Tester is the pendulum impact resiliency tester to measure the resilience value of vulcanized rubber.
Contact Now
SKZ148 Drop Dart Impact TesterThe impact resistance of plastic films and sheets is tested using a dart impact testing equipment, which uses a background light source to record test findings.StandardISO7765-85, GB9639-88, ASTM D1709 - 09 Technical parametersDart-head weight50-2000g, 5g/incremental (5g*5pcs,15g*15pcs, 30g*10pcs, 45g*10pcs, 80g*10pcs, 90g*15pcs)Dart-head semi-diameterA method: R19±1mm,B method: 25±1mmDart-head accuracy0.1%Impact height660mm, 1500mmImpact energy30JSample clamp deviceexternal dia.: 150mm, inside dia.: 125mmWorking t
Contact Now
Falling ball impact tester is suitable for all kinds of plastic sheet impact test. Standard: ASTM D639-81(1985): STANDARD methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball(falling ball) Working principle:On the lift beams, equipped with a control device for controlling the falling ball, release the ball, the impact of the sample, so that to achieve the purpose of testing. Impact energy can be calculated according to the weight and height of the ball.
Contact Now
Falling Hammer Impact Tester SKZ148BUsing Double tube structure, Mainly consists: workbench, Prevent secondary impact mechanism, Hammer, Lifting mechanism, Automatic drop hammer mechanism, Motor, reducer, Electric control box and StandWidely used in a variety of plastic pipe impact resistance of measurement, and also for plates, profiles measured impact. StandardISO 3127, MT-558, ISO 4422 Technical parametersMaximum impact height2000mmHeight positioning error≤ ± 2mmHammer weight0.25 ~ 10.00Kg (0.125Kg / per increment)Optional 15.00KgHammerD25, D90Lift hammer modeAuto (also can hand t
Contact Now
DSC is widely utilized in the fields of polymer research, performance testing, and quality control. It is intended to identify the inner heat transition in relation to temperature and heat flow. The fields of glass transition temperature, melting point, cold crystallization, phase transition, and oxidation induction time (OIT) are all included in DSC study and development.Standards:ISO/TR10837:1991, ASTM D3895-1998, ASTM E 967, ASTM E 968, ASTM E 793, ASTM D 3895, ASTM D 3417, ASTM D 3418, ISO 11357-6Features: 1. Rich information is shown on an industrial-grade 7-inch touch screen.2.
Contact Now
SKZ133 Rubber Brittleness TesterUsed to test the highest temperature called brittleness temperature when the specimen is broken by impact in prescribed conditions.
Contact Now
Dart impact testing machine used for plastic films and sheets of impact test to evaluate the impact resistance, it adopts background light source for test results.StandardISO7765-85: Determination for Impact Resistance of Plastic Film and SheetingGB9639-88: Impact Resistance Test of Plastic Films and SheetsASTM D1709 - 09 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart MethodTechnical parametersDart-head weight50-2000g, 5g/incremental (5g*5pcs,15g*15pcs, 30g*10pcs, 45g*10pcs, 80g*10pcs, 90g*15pcs)Dart-head semi-diameterA method: R19
Contact Now
To determine charpy impact properties of plastics, rigid plastic sheet, pipe, digital type. FeatureHigh precision, easy to use, can be directly calculated impact energy, save 60 historical data, six kinds of units can be switched, display can show the angle and angle peak or energy.
Contact Now
Used to test the highest temperature called brittleness temperature when the specimen is broken by impact in prescribed conditions.
Contact Now
-80℃~0℃ ISO812 ISO974—80 SKZ133 low temperature Rubber Brittleness EquipmentApplied for non-rigid plastic and other flexible materials at low temperatures and also test the brittleness temperature and low temperature performance for different rubber material or different formula vulcanized rubber. Standard: GB1682-82, ISO812:1991, ISO974—80.Technical parameters:Testing temperature-80℃~0℃Impact speed2 m/s±0.2 m/sImpactor weight200 ± 20gWorking stroke 40 ± 1mmTemperature fluctuation＜±0.5℃Distance between impactor and clamp11±0.5 (mm)Distance between i
Contact Now
SKZ131 ASTM D5289 ISO6502 Rotor-less Curemeter Rubber Vulcanizing Tester-Cure MeterFor measuring the unvulcanized rubber traits to discover the best therapy time.Standard:ASTM D5289, ISO6502, T30,T60,T90.Technical parameters:Temperature rangeroom temperature ~ 300 ℃Warming time≤ 15minTemperature Resolution0 to 200 °C: 0.1 °C0 to 300 °C: 1 °C.Temperature fluctuation≤ ± 0.5 °C (after feeding)Torque range0N.m ~ 10N.mTorque display resolution0.001N.mMaximum test time120min (modify time during testing)Swing angle± 0.5 ° (total amplitude of 1 °)Body swing
Contact Now
This equipment is designed for testing the plasticity and resilience of raw rubber, plastic rubber, and rubber. It requires precise temperature control and a digital instrument for setting and displaying temperature and time.Standard:GB/T12828 and ISO7323-1985.Technical parameters:Specimen suffered pressure49N±0.05NTemperature control70℃±1℃ (optionally set in the range of 100℃)Time range 3minIndicating range0-30 (mm)Indicating accuracy0.01mmPower 220V, 50HZ, 700WDimension 360×280×570 (mm)Net weight35kg
Contact Now
SKZ139 Rubber compression Deformation TesterContain by parallel steel plates, limiters and fasteners, used for vulcanized rubber, thermoplastic rubber in room temperature, high temperature and low temperature conditions, at a constant compression rate, after a certain compression time determination of the amount of deformation of rubber. Standard: ASTM-D395,ISO815.Technical parameters:Sample A: dia. 29mm, height: 12.5mmB: dia. 13mm, height: 6.3mmLimiters heightcompression rate 25%A: 9.3 ~ 9.4 B: 4.7 ~ 4.8Compression rate 15%A: 1
Contact Now
Used for testing the stiffness of all kinds of woven and knit goods, nonwoven fabrics and coated fabrics, including cotton, wool, silk, linen and chemical fiber, and also of flexible materials such as paper, leather, filmRelevant Standards:ZB WO4003, ISO 9073, ASTM D 1388, ISO9073-7, BS En22313Warranty1 yearCustomized supportOEMPlace of OriginChinaShandongBrand NameSKZWorking patternMicro-computer controlled, infrared stealth slant detecting, liquid crystal display, printing out testing resultsTesting range40.5, 43, 45( adjustable)Extension elongation0.5-20.5cmTesting accuracy0.01 cmSpecimen s
Contact Now
SKZ128 Digital Shore Hardness Tester Plastic and rubber that have been vulcanized are tested for hardness using a shore hardness tester. The stand holds the hardness head in place. To perform spot testing, you can also remove the head from the stand.
Contact Now
SKZ1018B Karl Fischer Moisture Water Content Test AnalysisIt is auto-analyzer used Karl Fischer titration method,determination moisture content.Standards:ISO 10337,ASTM D 1744, ISO 760 , ASTM E203Technical parameters:Measuring range3ppm-100% Resolution0.01mlMoisture titration Repeatability≤ 0.01Moisture titration linear correlation coefficient≥ 0.998Capacity error≤ ± 0.002Burette capacity＞25mlSensitivity10-6ASKZ1018B VOLUMETRIC KARL FISCHER TITRATIONCan be realized:solvent inhalation,determination,enddisplay (alarm)，waste water discharge,mixing by means of itsfunction keys.Complete a
Contact Now
Shore hardness tester is applied to test the hardness of vulcanized rubber and plastic. The hardness head is installed on the stand. You can also take the head from the stand to carry spot testing.
Contact Now
SKZ128 Portable Rubber Shore Hardness Testing MachineStandard:ISO7619-1:2004: Rubber, vulcanized or thermoplastic--Determination of indentation hardness-part 1: Duromerer technique ( shore hardness)ISO 868:2003: Plastics and ebonite-Determination of indentation hardness through skill of a duromerer ( shore hardness)Technical parameters:Diameter of pressure needle1.25mm±0.15mmEnd diameter of needle0.79mm±0.03mm (Shore A), R0.1±0.012mm (Shore D)Pressure needle taper angle35°±0.25°Pressure needle trip0- 2.5mm±0.04mmRange of scale0HA-100HA (Shore A), 0-
Contact Now
SKZ132 Mooney ViscometerUsed to calculate the viscosity, scorch, and curing index of raw rubber or rubber compound1. Data display, computer control, and automatic calibration2. Wide temperature range and easily adjustable settings on an imported digital temperature controller3. Making use of the most recent "host + computer + printer" framework concepts Standards: ASTM D1646,ISO 289,JIS K6300,GB/T 1232,GB/T 1233A Control Software Feature is:1. The options' units are kgf-cm, lbf-in Nm, dN-m, and MV;2.
Contact Now
SKZ134 Rubber PlastometerUsed to test plastic value and restoration value of raw rubber, plastic rubber and rubber. It takes high accurate temperature control and time instrument with digital setting, temperature and time display.Standard:GB/T12828 and ISO7323-1985.SpecificationSpecimen suffered pressure49N±0.05NTemperature control70℃±1℃ (optionally set in the range of 100℃)Time range 3minIndicating range0-30 (mm)Indicating accuracy0.01mmPower 220V, 50HZ, 700WDimension 360×280×570 (mm)Net weight35kg
Contact Now
It is auto-analyzer used Karl Fischer titration method,determination moisture content.Standards:ISO 10337,ASTM D 1744, ISO 760 , ASTM E203Features:1. New speed drop function, use automatic control electrode polarization voltage drop speed, measure a sample requires only tens of seconds2. Additional current meter makes the titration process more intuitive3. Entire fluid path is made of special materials selection, excellent corrosion resistance, to ensure long-term continuous operation4.
Contact Now
Product DescriptionLaboratory Fabric Down Proof Tester SKZ174 Testing the penetration resistance to feather and down of all kinds of textile fabrics.To determine the down-proof properties of fabric, rolling box method.Standards: GB/T12705, FTMS191A (Optional rubber ball)Product Features1. Adopts transparent cylinder as rotary box and has interlayer, can efficiently reduce the noise of balls impact the box.2. High performance motor, box rotate smoothly and stably.3. Box can automatically stop when the rotary number reach the preset value.4.
Contact Now
