The drying oven can provide drying, baking, sterilization and heat treatment. Stainless steel tank and digital display, its working temperature can reach to the highest point from room temperature, which can also be adjusted arbitrarily.
Contact Now
SKZ1015 Lab Drying OvenThe drying oven can provide drying, baking, sterilization and heat treatment. Stainless steel tank and digital display, its working temperature can reach to the highest point from room temperature, which can also be adjusted arbitrarily. Technical parameters:voltage220V 50HzTemperature control rangeRT+10℃～250℃Temperature resolution0.1℃Constant temperature fluctuation±1℃input power1120WWorking temperature5℃～40℃Liner size (mm)420×400×345Dimensions (mm)720×580×530Load carrier (standard)2pcsTiming range1～9999 minutes
Contact Now
Ozone aging test chamber is one of the climate simulation test equipment for testing vulcanized rubber in the static and dynamic tensile deformation state, exposure to air containing a certain concentration of ozone and a certain temperature environment, but no direct sunlight under the harsh Adaptability test conditions for a variety of research institutes and factories and mines laboratory test samples for the aging test.
Contact Now
SKZ143A/B Ageing Oven For Plastic And RubberStandard:ISO 188-- Rubber, vulcanized or thermoplastic--Accelerated ageing and heat resistance tests--Air-oven method.Technical parameters:The highest temperature200℃ (A type) , 300℃ (B type)Temperature fluctuation±1℃Turntable speed12r/minDimension of working room450×450×450 mmRated power2.2KWPowerAC220V, 50HZDimension870×660×1350 (mm)Net weight180kgTEMPERATURE CONTROLLED BYDIGITAL DISPLAYPOWVEFWORKING TEMPERATURE:FROM ROOM TEMPERATURE TO200℃ (A TYPE) OR 300'℃ (B TYPE)DIMENSION OF WORKING ROOM:450x450x450 MMPID AUTO ADJUS
Contact Now
Used to carry the heat-ageing test for plasticity material, insulation material. Temperature controlled by digital display, PID auto adjustment, can arbitrarily set the working temperature from room temperature to 200℃ or 300℃, automatically keep temperature.
Contact Now
SKZ1015 Vacuum Drying ChamberThe drying oven is capable of heat treatment, baking, sterilizing, and drying. Its digital display and stainless steel tank allow it to operate at a temperature that can be freely adjusted to the maximum point from room temperature.Technical parameters:voltage220V 50HzTemperature control rangeRT+10℃～250℃Temperature resolution0.1℃Constant temperature fluctuation±1℃input power1120WWorking temperature5℃～40℃Liner size (mm)420×400×345Dimensions (mm)720×580×530Load carrier (standard)2pcsTiming range1～9999 minutes
Contact Now
SKZ143 Accelerated ageing and heat resistance testsStandard:ISO 188-- Rubber, vulcanized or thermoplastic--Accelerated ageing and heat resistance tests--Air-oven method.Technical parameters:The highest temperature200℃ (A type) , 300℃ (B type)Temperature fluctuation±1℃Turntable speed12r/minDimension of working room450×450×450 mmRated power2.2KWPowerAC220V, 50HZDimension870×660×1350 (mm)Net weight180kgTEMPERATURE CONTROLLED BYDIGITAL DISPLAYPOWVEFWORKING TEMPERATURE:FROM ROOM TEMPERATURE TO200℃ (A TYPE) OR 300'℃ (B TYPE)DIMENSION OF WORKING ROOM:450x450x450 MMPID AUTO ADJ
Contact Now
Product DescriptionLaboratory Color Assessment Cabinet SKZ199 The Oven is applying in packaging, printing, textile, dye, leather, rubber, paint, ink, chemistry and cloth to test and calibrate the color deflection of products. Can equipped light such as D65, TL8, CWF, U30, UV, F/A as well as D35, D50, D75 etc Feature 1.Separately recorded the time each light source requested.2.With a touch switch, all Micro-control, long-term trouble-free operation.3.Automatically switch multiple light, easy to test metamerism effect.4.Absorption-type panel in gray, consistent with the inter
Contact Now
Product Introduction:Can be used for testing gas concentration in laboratories, factories, etc. It can detect nearly 300 different gases and customize different gas ranges.
Contact Now
Product UsageThe SKZ1050-CLO2 gas detector is a device specifically designed for monitoring the concentration of chlorine dioxide, suitable for water pretreatment processes and sewage treatment plants. This detector can effectively control the concentration of chlorine dioxide, ensuring that the water quality meets relevant disinfection requirements and standards.
Contact Now
MiniMeta Diffusion Type NH3 Single Gas Monitor Alarm Portable Ammonia DetectorMiniMeta can detect conventional toxic and harmful gases such as carbon monoxide, hydrogen sulfide, oxygen, and sulfur dioxide, and is widely used in industries such as petroleum and petrochemical, metallurgy, and chemical engineering for personnel protection and gas detection.SpecificationsSampling methodDiffusion typeGas typeNH3Measure range 0-1000ppmResolution1ppmSensor PrincipleElectrochemical principleResponse time≤30 secondsLanguageChinese/EnglishAccuracy≤±3%FS or ±10%Measure unitPPM, m
Contact Now
Fiber Classifier (Bauer Fiber Classifier) is the equipment used for measuring the weight-average fiber length of pulp fiber according to screening method by pulp and paper-making laboratory. Principle:Screening the pulp suspension into the vessel, the vessel is charged with mesh sieve, Container into a ladder type, the pulp suspension flows from one container to another container, in various different sieve to retain the fiber length pulp, retention of pulp fiber length and the sieve mesh size.
Contact Now
To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(cm3/10min) and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, polypropylene, ABS resin and poly-formaldehyde resin, etc, whose melt temperature are lower, widely applied to the fields of plastics materials, product, petrochemical.Standards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplas
Contact Now
SKZ145A Melt Flow Indexer PlastometerTechnical parameters:Test methodMFR (unit: g / 10min)Temperature rangeroom temperature ~ 300 ℃Temperature accuracy± 0.5 ℃Temperature Resolution0.1 ℃Measuring range0.1 ~ 300g / 10min (MFR)load3.187 ~ 211.82N is divided into eightBarrel diameterф9.55mm ± 0.025mmDie apertureΦ2.095 ± 0.005mmPowerAC220V±10% 50Hz 1kWDimension300mm×400mm×500mmWeight35kg ABOUT USSKZ Industrial Co., Limited and SKZ International Co., Limited are the individuals of SKZ, which are specialised in furnish rubber trying out machine.SKZ&n
Contact Now
SKZ145A Melt Flow Indexer MFR instrumentTechnical parameters:Test methodMFR (unit: g / 10min)Temperature rangeroom temperature ~ 300 ℃Temperature accuracy± 0.5 ℃Temperature Resolution0.1 ℃Measuring range0.1 ~ 300g / 10min (MFR)load3.187 ~ 211.82N is divided into eightBarrel diameterф9.55mm ± 0.025mmDie apertureΦ2.095 ± 0.005mmPowerAC220V±10% 50Hz 1kWDimension300mm×400mm×500mmWeight35kg ABOUT USSKZ Industrial Co., Limited and SKZ International Co., Limited are the humans of SKZ, which are specialised in furnish rubber attempting out machine.SKZ installed
Contact Now
Product descriptionIt adopts 2.31-inch high-definition color screen for real-time display, and adopts gas sensors of well-known brands in the industry. Technical ParametersDetection gasCarbon monoxide COScope of detection0-500/ 1000/ 2000/ 5000ppm ,0-5000/10000ppm，10/ 20/ 50/ 100%VolResolution0.1 PPM/ 1 PPM/ 0.01%VOLDetection principleInfrared principles/ Electrochemistry principlesSensor life2-3 years/ 5 yearsDetection methodBuilt-in pump suction, flow rate 500ml/minDisplay method2.31 inch 320X240 high-definition color screen display, 5-buttons operationDetection ac
Contact Now
NTV-AI High temperature ViscometerThe viscometer is used to measure the absolute viscosity of Newtonian fluid and non-Newtonian fluids the apparent viscosity, a measure of sensitivity, the test results are reliable, easy to operate, nice shape, can be widely used for Hot melt adhesive, asphalt, paraffin waxFeatures:1. The 7-inch large intelligent touch operation, the operation is simple and convenient, and it can display the dynamic viscosity value, the kinematic viscosity value, and the viscosity-temperature curve.2.
Contact Now
SKZ0154 Universal Tensile MachinePerformance tests include tensile, compression, bending, shear, tear, and peel.Feature1.Using the Windows 7 operating system platform, measurement and control software has a graphical user interface, flexible data processing, modular programming in VB, and safety limit protection.2. Equipped with automated algorithm development and automated test report editing features.3. Determine the elastic modulus, average peel force, maximum force, yield strength, and non-proportional yield strength. introduction of control software1.
Contact Now
Standard: ISO1133 Feature:1. LCD display, time, temperature and sample times can be set.2. Built-in printer 3. Automatic cutting4. MFR test item Technical parameters:Test methodMFR (unit: g / 10min)Temperature rangeroom temperature ~ 300 ℃Temperature accuracy± 0.5 ℃Temperature Resolution0.1 ℃Measuring range0.1 ~ 300g / 10min (MFR)load3.187 ~ 211.82N is divided into eightBarrel diameterф9.55mm ± 0.025mmDie apertureΦ2.095 ± 0.005mmPowerAC220V±10% 50Hz 1kWDimension300mm×400mm×500mmWeight 35kg
Contact Now
For tensile, compression, bending, shear, tear, peel performance test.Feature1.Measurement and control software using Windows 7 operating system platform, graphical and graphical software interface, flexible data processing, modular programming language VB, safety limit protection.2.With automatic algorithm generation, automatic test report editing capabilities3.
Contact Now
LCD Melt Flow Indexer MRF MVR Meter ISO1133 400degree MFI EquipmentStandards:ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics —Part 1:Standard methodISO 1133-2:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics —Part 2: Method for materials sensitive to time temperature history and/or moistureGBT 3682.1-2018 "Plastic Thermoplastic Melt Mass Flow Rate (MFR) and Melt Volume Flow Rate (MVR) Determination"ASTM D1238-2013 "Standard Test Method
Contact Now
SKZ129A Auto Akron Abrasion TesterStandard ISO:4661-1:1993, ISO 2481:1988, ISO 471:1983, ISO 1826:1981Technical parameters:Tire suffered force26.7N (2.7kgf)Tire axis rotary speed76±2r/minWheel axis speed33-35r/minAngle between the two axis0°~45°PowerAC220V±10%Dimension600×480×400 (mm)Weight60kgProducts DescriptionSKZ129AAkron Abrasion TesterIS0:4661-1:1993I50 2481:1988IS0 471:1983I50 1826:1981The Angle between therubber wheel shaft and thegrinding wheel can beadjusted to 15°or 25°Stable base, solid structure.durable and not easy to breakHigh quality digital display,display the number of wearre
Contact Now
SKZ101A Tensile Testing MachinePaper and board are tested for tensile strength using this apparatus, which has an accurate auto control and data gathering system.Characteristic1) Touch screen display in color.2) A large range of steady and effective adjustments can be made to the test force.3) Show real-time test force, test speed, and test displacement.4) Following a test, it can automatically revert to its initial position.5) Equipped with overload, overcurrent, and limit position protection.6.
Contact Now
SKZ145 ISO1133 Manufacture Auto LCD Melt Flow Indexer Factory Melt Flow IndexerStandards:ISO 1133-1:2011 Plastics — Determination of the soften mass-flow price (MFR) and soften volume-flow price (MVR) of thermoplastics —Part 1:Standard methodISO 1133-2:2011 Plastics — Determination of the soften mass-flow charge (MFR) and soften volume-flow charge (MVR) of thermoplastics —Part 2: Method for substances touchy to time temperature records and/or moistureASTM D1238-2013 "Standard Test Meth
Contact Now
